linux/include/asm-i386/apic.h
Eric W. Biederman f2b36db692 [PATCH] i386: move apic init in init_IRQs
All kinds of ugliness exists because we don't initialize
the apics during init_IRQs.
- We calibrate jiffies in non apic mode even when we are using apics.
- We have to have special code to initialize the apics when non-smp.
- The legacy i8259 must exist and be setup correctly, even
  when we won't use it past initialization.
- The kexec on panic code must restore the state of the io_apics.
- init/main.c needs a special case for !smp smp_init on x86

In addition to pure code movement I needed a couple
of non-obvious changes:
- Move setup_boot_APIC_clock into APIC_late_time_init for
  simplicity.
- Use cpu_khz to generate a better approximation of loops_per_jiffies
  so I can verify the timer interrupt is working.
- Call setup_apic_nmi_watchdog again after cpu_khz is initialized on
  the boot cpu.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:13 -08:00

142 lines
3.4 KiB
C

#ifndef __ASM_APIC_H
#define __ASM_APIC_H
#include <linux/config.h>
#include <linux/pm.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <asm/processor.h>
#include <asm/system.h>
#define Dprintk(x...)
/*
* Debugging macros
*/
#define APIC_QUIET 0
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
extern int enable_local_apic;
extern int apic_verbosity;
static inline void lapic_disable(void)
{
enable_local_apic = -1;
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
}
static inline void lapic_enable(void)
{
enable_local_apic = 1;
}
/*
* Define the default level of output to be very little
* This can be turned up by using apic=verbose for more
* information and apic=debug for _lots_ of information.
* apic_verbosity is defined in apic.c
*/
#define apic_printk(v, s, a...) do { \
if ((v) <= apic_verbosity) \
printk(s, ##a); \
} while (0)
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Basic functions accessing APICs.
*/
static __inline void apic_write(unsigned long reg, unsigned long v)
{
*((volatile unsigned long *)(APIC_BASE+reg)) = v;
}
static __inline void apic_write_atomic(unsigned long reg, unsigned long v)
{
xchg((volatile unsigned long *)(APIC_BASE+reg), v);
}
static __inline unsigned long apic_read(unsigned long reg)
{
return *((volatile unsigned long *)(APIC_BASE+reg));
}
static __inline__ void apic_wait_icr_idle(void)
{
while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY )
cpu_relax();
}
int get_physical_broadcast(void);
#ifdef CONFIG_X86_GOOD_APIC
# define FORCE_READ_AROUND_WRITE 0
# define apic_read_around(x)
# define apic_write_around(x,y) apic_write((x),(y))
#else
# define FORCE_READ_AROUND_WRITE 1
# define apic_read_around(x) apic_read(x)
# define apic_write_around(x,y) apic_write_atomic((x),(y))
#endif
static inline void ack_APIC_irq(void)
{
/*
* ack_APIC_irq() actually gets compiled as a single instruction:
* - a single rmw on Pentium/82489DX
* - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
* ... yummie.
*/
/* Docs say use 0 for future compatibility */
apic_write_around(APIC_EOI, 0);
}
extern void (*wait_timer_tick)(void);
extern int get_maxlvt(void);
extern void clear_local_APIC(void);
extern void connect_bsp_APIC (void);
extern void disconnect_bsp_APIC (int virt_wire_setup);
extern void disable_local_APIC (void);
extern void lapic_shutdown (void);
extern int verify_local_APIC (void);
extern void cache_APIC_registers (void);
extern void sync_Arb_IDs (void);
extern void init_bsp_APIC (void);
extern void setup_local_APIC (void);
extern void init_apic_mappings (void);
extern void smp_local_timer_interrupt (struct pt_regs * regs);
extern void setup_boot_APIC_clock (void);
extern void setup_secondary_APIC_clock (void);
extern void setup_apic_nmi_watchdog (void);
extern int reserve_lapic_nmi(void);
extern void release_lapic_nmi(void);
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
extern void nmi_watchdog_tick (struct pt_regs * regs);
extern int APIC_init(void);
extern void APIC_late_time_init(void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
extern void enable_NMI_through_LVT0 (void * dummy);
extern unsigned int nmi_watchdog;
#define NMI_NONE 0
#define NMI_IO_APIC 1
#define NMI_LOCAL_APIC 2
#define NMI_INVALID 3
extern int disable_timer_pin_1;
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */
#endif /* __ASM_APIC_H */