54a19b4d3f
There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
55 lines
1.4 KiB
Plaintext
55 lines
1.4 KiB
Plaintext
What: /sys/class/backlight/<backlight>/als_channel
|
|
Date: May 2012
|
|
KernelVersion: 3.5
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
Description:
|
|
Get the ALS output channel used as input in
|
|
ALS-current-control mode (0, 1), where:
|
|
|
|
== ==========================
|
|
0 out_current0 (backlight 0)
|
|
1 out_current1 (backlight 1)
|
|
== ==========================
|
|
|
|
What: /sys/class/backlight/<backlight>/als_en
|
|
Date: May 2012
|
|
KernelVersion: 3.5
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
Description:
|
|
Enable ALS-current-control mode (0, 1).
|
|
|
|
What: /sys/class/backlight/<backlight>/id
|
|
Date: April 2012
|
|
KernelVersion: 3.5
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
Description:
|
|
Get the id of this backlight (0, 1).
|
|
|
|
What: /sys/class/backlight/<backlight>/linear
|
|
Date: April 2012
|
|
KernelVersion: 3.5
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
Description:
|
|
Set the brightness-mapping mode (0, 1), where:
|
|
|
|
== ================
|
|
0 exponential mode
|
|
1 linear mode
|
|
== ================
|
|
|
|
What: /sys/class/backlight/<backlight>/pwm
|
|
Date: April 2012
|
|
KernelVersion: 3.5
|
|
Contact: Johan Hovold <jhovold@gmail.com>
|
|
Description:
|
|
Set the PWM-input control mask (5 bits), where:
|
|
|
|
===== ===========================
|
|
bit 5 PWM-input enabled in Zone 4
|
|
bit 4 PWM-input enabled in Zone 3
|
|
bit 3 PWM-input enabled in Zone 2
|
|
bit 2 PWM-input enabled in Zone 1
|
|
bit 1 PWM-input enabled in Zone 0
|
|
bit 0 PWM-input enabled
|
|
===== ===========================
|