..
bmi.c
ath10k: improve logging to include dev id
2014-08-26 19:04:48 +03:00
bmi.h
ath10k: Fix BMI communication timeout for QCA99X0
2015-06-30 15:12:46 +03:00
ce.c
ath10k: Extend CE src desc flags for interrupt indication
2015-06-30 15:12:44 +03:00
ce.h
ath10k: Extend CE src desc flags for interrupt indication
2015-06-30 15:12:44 +03:00
core.c
ath10k: fix memory alloc failure in qca99x0 during wmi svc rdy event
2015-07-30 16:54:28 +03:00
core.h
ath10k: fix memory alloc failure in qca99x0 during wmi svc rdy event
2015-07-30 16:54:28 +03:00
debug.c
ath10k: enable raw encap mode and software crypto engine
2015-07-29 11:28:24 +03:00
debug.h
ath10k: enable pci soc powersaving
2015-05-22 13:39:28 +03:00
debugfs_sta.c
ath10k: add support to send delba
2015-01-13 16:13:47 +02:00
hif.h
ath10k: remove transfer_id from ath10k_hif_cb::tx_completion
2014-12-01 09:13:36 +02:00
htc.c
ath10k: replenish htc tx credits always
2015-04-09 14:58:16 +03:00
htc.h
ath10k: fix use of multiple blank lines
2014-09-18 10:45:20 +03:00
htt_rx.c
ath10k: enable raw encap mode and software crypto engine
2015-07-29 11:28:24 +03:00
htt_tx.c
ath10k: initialize msdu ext. descriptor before use
2015-07-30 17:05:29 +03:00
htt.c
ath10k: enable raw encap mode and software crypto engine
2015-07-29 11:28:24 +03:00
htt.h
ath10k: enable raw encap mode and software crypto engine
2015-07-29 11:28:24 +03:00
hw.c
ath10k: fix QCA61X4 boot up
2015-07-11 19:06:15 +03:00
hw.h
ath10k: increase max client to 512 in qca99x0
2015-07-30 16:54:57 +03:00
Kconfig
ath10k: ATH10K_DEBUGFS depends on DEBUG_FS
2014-09-10 14:17:45 +03:00
mac.c
ath10k: Enable MU MIMO txbf support for QCA99X0
2015-08-13 14:21:18 +03:00
mac.h
ath10k: fix per-vif queue locking
2015-07-11 19:06:26 +03:00
Makefile
ath10k: Add support for code swap
2015-06-30 15:12:47 +03:00
p2p.c
ath10k: implement handling of p2p noa event
2015-03-07 09:57:42 +02:00
p2p.h
ath10k: implement handling of p2p noa event
2015-03-07 09:57:42 +02:00
pci.c
ath10k: add QCA99X0 to supported device list
2015-07-30 17:04:00 +03:00
pci.h
ath10k: Make target cpu address to CE address conversion chip specific
2015-06-30 15:12:40 +03:00
rx_desc.h
ath10k: add support for qca99x0 Rx descriptors
2015-07-24 10:44:55 +03:00
spectral.c
ath10k: increase relay buffer size of spectral scan
2015-05-11 17:50:42 +03:00
spectral.h
ath10k: clean up phyerr code
2014-09-23 12:31:54 +03:00
swap.c
ath10k: Add support for code swap
2015-06-30 15:12:47 +03:00
swap.h
ath10k: Add support for code swap
2015-06-30 15:12:47 +03:00
targaddrs.h
ath10k: Add hw register/values for QCA99X0 chip
2015-06-30 15:12:37 +03:00
testmode_i.h
ath10k: add testmode
2014-09-11 23:42:36 +03:00
testmode.c
ath10k: introduce wmi ops
2014-12-08 17:39:08 +02:00
testmode.h
ath10k: add testmode
2014-09-11 23:42:36 +03:00
thermal.c
ath10k: don't call quiet mode if it's not implemented
2015-04-01 20:21:17 +03:00
thermal.h
ath10k: configure thermal throttle while powering up
2015-03-23 17:16:37 +02:00
trace.c
trace.h
ath10k: add extra check for frame tracing
2015-04-17 09:33:48 +03:00
txrx.c
ath10k: Improve performance by reducing tx_lock contention
2015-07-29 11:27:24 +03:00
txrx.h
ath10k: fix Rx aggregation reordering
2014-07-25 11:15:39 +03:00
wmi-ops.h
ath10k: Support different txbf configuration schemes
2015-08-13 14:21:10 +03:00
wmi-tlv.c
ath10k: Support different txbf configuration schemes
2015-08-13 14:21:10 +03:00
wmi-tlv.h
ath10k: implement tx pause wmi event
2015-04-01 20:31:08 +03:00
wmi.c
ath10k: Support different txbf configuration schemes
2015-08-13 14:21:10 +03:00
wmi.h
ath10k: Enable MU MIMO txbf support for QCA99X0
2015-08-13 14:21:18 +03:00
wow.c
ath10k: add WOW patterns support
2015-03-30 09:10:24 +03:00
wow.h
ath10k: add WOW patterns support
2015-03-30 09:10:24 +03:00
a48e2cc899