linux/drivers/infiniband/core/rw.c
Mark Bloch 1fb7f8973f RDMA: Support more than 255 rdma ports
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.

This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs.  HW/Spec defined values must also not be changed.

With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.

When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.

The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely

Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.

While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),

Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26 09:31:21 -03:00

745 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016 HGST, a Western Digital Company.
*/
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/pci-p2pdma.h>
#include <rdma/mr_pool.h>
#include <rdma/rw.h>
enum {
RDMA_RW_SINGLE_WR,
RDMA_RW_MULTI_WR,
RDMA_RW_MR,
RDMA_RW_SIG_MR,
};
static bool rdma_rw_force_mr;
module_param_named(force_mr, rdma_rw_force_mr, bool, 0);
MODULE_PARM_DESC(force_mr, "Force usage of MRs for RDMA READ/WRITE operations");
/*
* Report whether memory registration should be used. Memory registration must
* be used for iWarp devices because of iWARP-specific limitations. Memory
* registration is also enabled if registering memory might yield better
* performance than using multiple SGE entries, see rdma_rw_io_needs_mr()
*/
static inline bool rdma_rw_can_use_mr(struct ib_device *dev, u32 port_num)
{
if (rdma_protocol_iwarp(dev, port_num))
return true;
if (dev->attrs.max_sgl_rd)
return true;
if (unlikely(rdma_rw_force_mr))
return true;
return false;
}
/*
* Check if the device will use memory registration for this RW operation.
* For RDMA READs we must use MRs on iWarp and can optionally use them as an
* optimization otherwise. Additionally we have a debug option to force usage
* of MRs to help testing this code path.
*/
static inline bool rdma_rw_io_needs_mr(struct ib_device *dev, u32 port_num,
enum dma_data_direction dir, int dma_nents)
{
if (dir == DMA_FROM_DEVICE) {
if (rdma_protocol_iwarp(dev, port_num))
return true;
if (dev->attrs.max_sgl_rd && dma_nents > dev->attrs.max_sgl_rd)
return true;
}
if (unlikely(rdma_rw_force_mr))
return true;
return false;
}
static inline u32 rdma_rw_fr_page_list_len(struct ib_device *dev,
bool pi_support)
{
u32 max_pages;
if (pi_support)
max_pages = dev->attrs.max_pi_fast_reg_page_list_len;
else
max_pages = dev->attrs.max_fast_reg_page_list_len;
/* arbitrary limit to avoid allocating gigantic resources */
return min_t(u32, max_pages, 256);
}
static inline int rdma_rw_inv_key(struct rdma_rw_reg_ctx *reg)
{
int count = 0;
if (reg->mr->need_inval) {
reg->inv_wr.opcode = IB_WR_LOCAL_INV;
reg->inv_wr.ex.invalidate_rkey = reg->mr->lkey;
reg->inv_wr.next = &reg->reg_wr.wr;
count++;
} else {
reg->inv_wr.next = NULL;
}
return count;
}
/* Caller must have zero-initialized *reg. */
static int rdma_rw_init_one_mr(struct ib_qp *qp, u32 port_num,
struct rdma_rw_reg_ctx *reg, struct scatterlist *sg,
u32 sg_cnt, u32 offset)
{
u32 pages_per_mr = rdma_rw_fr_page_list_len(qp->pd->device,
qp->integrity_en);
u32 nents = min(sg_cnt, pages_per_mr);
int count = 0, ret;
reg->mr = ib_mr_pool_get(qp, &qp->rdma_mrs);
if (!reg->mr)
return -EAGAIN;
count += rdma_rw_inv_key(reg);
ret = ib_map_mr_sg(reg->mr, sg, nents, &offset, PAGE_SIZE);
if (ret < 0 || ret < nents) {
ib_mr_pool_put(qp, &qp->rdma_mrs, reg->mr);
return -EINVAL;
}
reg->reg_wr.wr.opcode = IB_WR_REG_MR;
reg->reg_wr.mr = reg->mr;
reg->reg_wr.access = IB_ACCESS_LOCAL_WRITE;
if (rdma_protocol_iwarp(qp->device, port_num))
reg->reg_wr.access |= IB_ACCESS_REMOTE_WRITE;
count++;
reg->sge.addr = reg->mr->iova;
reg->sge.length = reg->mr->length;
return count;
}
static int rdma_rw_init_mr_wrs(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
u32 port_num, struct scatterlist *sg, u32 sg_cnt, u32 offset,
u64 remote_addr, u32 rkey, enum dma_data_direction dir)
{
struct rdma_rw_reg_ctx *prev = NULL;
u32 pages_per_mr = rdma_rw_fr_page_list_len(qp->pd->device,
qp->integrity_en);
int i, j, ret = 0, count = 0;
ctx->nr_ops = DIV_ROUND_UP(sg_cnt, pages_per_mr);
ctx->reg = kcalloc(ctx->nr_ops, sizeof(*ctx->reg), GFP_KERNEL);
if (!ctx->reg) {
ret = -ENOMEM;
goto out;
}
for (i = 0; i < ctx->nr_ops; i++) {
struct rdma_rw_reg_ctx *reg = &ctx->reg[i];
u32 nents = min(sg_cnt, pages_per_mr);
ret = rdma_rw_init_one_mr(qp, port_num, reg, sg, sg_cnt,
offset);
if (ret < 0)
goto out_free;
count += ret;
if (prev) {
if (reg->mr->need_inval)
prev->wr.wr.next = &reg->inv_wr;
else
prev->wr.wr.next = &reg->reg_wr.wr;
}
reg->reg_wr.wr.next = &reg->wr.wr;
reg->wr.wr.sg_list = &reg->sge;
reg->wr.wr.num_sge = 1;
reg->wr.remote_addr = remote_addr;
reg->wr.rkey = rkey;
if (dir == DMA_TO_DEVICE) {
reg->wr.wr.opcode = IB_WR_RDMA_WRITE;
} else if (!rdma_cap_read_inv(qp->device, port_num)) {
reg->wr.wr.opcode = IB_WR_RDMA_READ;
} else {
reg->wr.wr.opcode = IB_WR_RDMA_READ_WITH_INV;
reg->wr.wr.ex.invalidate_rkey = reg->mr->lkey;
}
count++;
remote_addr += reg->sge.length;
sg_cnt -= nents;
for (j = 0; j < nents; j++)
sg = sg_next(sg);
prev = reg;
offset = 0;
}
if (prev)
prev->wr.wr.next = NULL;
ctx->type = RDMA_RW_MR;
return count;
out_free:
while (--i >= 0)
ib_mr_pool_put(qp, &qp->rdma_mrs, ctx->reg[i].mr);
kfree(ctx->reg);
out:
return ret;
}
static int rdma_rw_init_map_wrs(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
struct scatterlist *sg, u32 sg_cnt, u32 offset,
u64 remote_addr, u32 rkey, enum dma_data_direction dir)
{
u32 max_sge = dir == DMA_TO_DEVICE ? qp->max_write_sge :
qp->max_read_sge;
struct ib_sge *sge;
u32 total_len = 0, i, j;
ctx->nr_ops = DIV_ROUND_UP(sg_cnt, max_sge);
ctx->map.sges = sge = kcalloc(sg_cnt, sizeof(*sge), GFP_KERNEL);
if (!ctx->map.sges)
goto out;
ctx->map.wrs = kcalloc(ctx->nr_ops, sizeof(*ctx->map.wrs), GFP_KERNEL);
if (!ctx->map.wrs)
goto out_free_sges;
for (i = 0; i < ctx->nr_ops; i++) {
struct ib_rdma_wr *rdma_wr = &ctx->map.wrs[i];
u32 nr_sge = min(sg_cnt, max_sge);
if (dir == DMA_TO_DEVICE)
rdma_wr->wr.opcode = IB_WR_RDMA_WRITE;
else
rdma_wr->wr.opcode = IB_WR_RDMA_READ;
rdma_wr->remote_addr = remote_addr + total_len;
rdma_wr->rkey = rkey;
rdma_wr->wr.num_sge = nr_sge;
rdma_wr->wr.sg_list = sge;
for (j = 0; j < nr_sge; j++, sg = sg_next(sg)) {
sge->addr = sg_dma_address(sg) + offset;
sge->length = sg_dma_len(sg) - offset;
sge->lkey = qp->pd->local_dma_lkey;
total_len += sge->length;
sge++;
sg_cnt--;
offset = 0;
}
rdma_wr->wr.next = i + 1 < ctx->nr_ops ?
&ctx->map.wrs[i + 1].wr : NULL;
}
ctx->type = RDMA_RW_MULTI_WR;
return ctx->nr_ops;
out_free_sges:
kfree(ctx->map.sges);
out:
return -ENOMEM;
}
static int rdma_rw_init_single_wr(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
struct scatterlist *sg, u32 offset, u64 remote_addr, u32 rkey,
enum dma_data_direction dir)
{
struct ib_rdma_wr *rdma_wr = &ctx->single.wr;
ctx->nr_ops = 1;
ctx->single.sge.lkey = qp->pd->local_dma_lkey;
ctx->single.sge.addr = sg_dma_address(sg) + offset;
ctx->single.sge.length = sg_dma_len(sg) - offset;
memset(rdma_wr, 0, sizeof(*rdma_wr));
if (dir == DMA_TO_DEVICE)
rdma_wr->wr.opcode = IB_WR_RDMA_WRITE;
else
rdma_wr->wr.opcode = IB_WR_RDMA_READ;
rdma_wr->wr.sg_list = &ctx->single.sge;
rdma_wr->wr.num_sge = 1;
rdma_wr->remote_addr = remote_addr;
rdma_wr->rkey = rkey;
ctx->type = RDMA_RW_SINGLE_WR;
return 1;
}
static void rdma_rw_unmap_sg(struct ib_device *dev, struct scatterlist *sg,
u32 sg_cnt, enum dma_data_direction dir)
{
if (is_pci_p2pdma_page(sg_page(sg)))
pci_p2pdma_unmap_sg(dev->dma_device, sg, sg_cnt, dir);
else
ib_dma_unmap_sg(dev, sg, sg_cnt, dir);
}
static int rdma_rw_map_sg(struct ib_device *dev, struct scatterlist *sg,
u32 sg_cnt, enum dma_data_direction dir)
{
if (is_pci_p2pdma_page(sg_page(sg))) {
if (WARN_ON_ONCE(ib_uses_virt_dma(dev)))
return 0;
return pci_p2pdma_map_sg(dev->dma_device, sg, sg_cnt, dir);
}
return ib_dma_map_sg(dev, sg, sg_cnt, dir);
}
/**
* rdma_rw_ctx_init - initialize a RDMA READ/WRITE context
* @ctx: context to initialize
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @sg: scatterlist to READ/WRITE from/to
* @sg_cnt: number of entries in @sg
* @sg_offset: current byte offset into @sg
* @remote_addr:remote address to read/write (relative to @rkey)
* @rkey: remote key to operate on
* @dir: %DMA_TO_DEVICE for RDMA WRITE, %DMA_FROM_DEVICE for RDMA READ
*
* Returns the number of WQEs that will be needed on the workqueue if
* successful, or a negative error code.
*/
int rdma_rw_ctx_init(struct rdma_rw_ctx *ctx, struct ib_qp *qp, u32 port_num,
struct scatterlist *sg, u32 sg_cnt, u32 sg_offset,
u64 remote_addr, u32 rkey, enum dma_data_direction dir)
{
struct ib_device *dev = qp->pd->device;
int ret;
ret = rdma_rw_map_sg(dev, sg, sg_cnt, dir);
if (!ret)
return -ENOMEM;
sg_cnt = ret;
/*
* Skip to the S/G entry that sg_offset falls into:
*/
for (;;) {
u32 len = sg_dma_len(sg);
if (sg_offset < len)
break;
sg = sg_next(sg);
sg_offset -= len;
sg_cnt--;
}
ret = -EIO;
if (WARN_ON_ONCE(sg_cnt == 0))
goto out_unmap_sg;
if (rdma_rw_io_needs_mr(qp->device, port_num, dir, sg_cnt)) {
ret = rdma_rw_init_mr_wrs(ctx, qp, port_num, sg, sg_cnt,
sg_offset, remote_addr, rkey, dir);
} else if (sg_cnt > 1) {
ret = rdma_rw_init_map_wrs(ctx, qp, sg, sg_cnt, sg_offset,
remote_addr, rkey, dir);
} else {
ret = rdma_rw_init_single_wr(ctx, qp, sg, sg_offset,
remote_addr, rkey, dir);
}
if (ret < 0)
goto out_unmap_sg;
return ret;
out_unmap_sg:
rdma_rw_unmap_sg(dev, sg, sg_cnt, dir);
return ret;
}
EXPORT_SYMBOL(rdma_rw_ctx_init);
/**
* rdma_rw_ctx_signature_init - initialize a RW context with signature offload
* @ctx: context to initialize
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @sg: scatterlist to READ/WRITE from/to
* @sg_cnt: number of entries in @sg
* @prot_sg: scatterlist to READ/WRITE protection information from/to
* @prot_sg_cnt: number of entries in @prot_sg
* @sig_attrs: signature offloading algorithms
* @remote_addr:remote address to read/write (relative to @rkey)
* @rkey: remote key to operate on
* @dir: %DMA_TO_DEVICE for RDMA WRITE, %DMA_FROM_DEVICE for RDMA READ
*
* Returns the number of WQEs that will be needed on the workqueue if
* successful, or a negative error code.
*/
int rdma_rw_ctx_signature_init(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
u32 port_num, struct scatterlist *sg, u32 sg_cnt,
struct scatterlist *prot_sg, u32 prot_sg_cnt,
struct ib_sig_attrs *sig_attrs,
u64 remote_addr, u32 rkey, enum dma_data_direction dir)
{
struct ib_device *dev = qp->pd->device;
u32 pages_per_mr = rdma_rw_fr_page_list_len(qp->pd->device,
qp->integrity_en);
struct ib_rdma_wr *rdma_wr;
int count = 0, ret;
if (sg_cnt > pages_per_mr || prot_sg_cnt > pages_per_mr) {
pr_err("SG count too large: sg_cnt=%d, prot_sg_cnt=%d, pages_per_mr=%d\n",
sg_cnt, prot_sg_cnt, pages_per_mr);
return -EINVAL;
}
ret = rdma_rw_map_sg(dev, sg, sg_cnt, dir);
if (!ret)
return -ENOMEM;
sg_cnt = ret;
if (prot_sg_cnt) {
ret = rdma_rw_map_sg(dev, prot_sg, prot_sg_cnt, dir);
if (!ret) {
ret = -ENOMEM;
goto out_unmap_sg;
}
prot_sg_cnt = ret;
}
ctx->type = RDMA_RW_SIG_MR;
ctx->nr_ops = 1;
ctx->reg = kzalloc(sizeof(*ctx->reg), GFP_KERNEL);
if (!ctx->reg) {
ret = -ENOMEM;
goto out_unmap_prot_sg;
}
ctx->reg->mr = ib_mr_pool_get(qp, &qp->sig_mrs);
if (!ctx->reg->mr) {
ret = -EAGAIN;
goto out_free_ctx;
}
count += rdma_rw_inv_key(ctx->reg);
memcpy(ctx->reg->mr->sig_attrs, sig_attrs, sizeof(struct ib_sig_attrs));
ret = ib_map_mr_sg_pi(ctx->reg->mr, sg, sg_cnt, NULL, prot_sg,
prot_sg_cnt, NULL, SZ_4K);
if (unlikely(ret)) {
pr_err("failed to map PI sg (%d)\n", sg_cnt + prot_sg_cnt);
goto out_destroy_sig_mr;
}
ctx->reg->reg_wr.wr.opcode = IB_WR_REG_MR_INTEGRITY;
ctx->reg->reg_wr.wr.wr_cqe = NULL;
ctx->reg->reg_wr.wr.num_sge = 0;
ctx->reg->reg_wr.wr.send_flags = 0;
ctx->reg->reg_wr.access = IB_ACCESS_LOCAL_WRITE;
if (rdma_protocol_iwarp(qp->device, port_num))
ctx->reg->reg_wr.access |= IB_ACCESS_REMOTE_WRITE;
ctx->reg->reg_wr.mr = ctx->reg->mr;
ctx->reg->reg_wr.key = ctx->reg->mr->lkey;
count++;
ctx->reg->sge.addr = ctx->reg->mr->iova;
ctx->reg->sge.length = ctx->reg->mr->length;
if (sig_attrs->wire.sig_type == IB_SIG_TYPE_NONE)
ctx->reg->sge.length -= ctx->reg->mr->sig_attrs->meta_length;
rdma_wr = &ctx->reg->wr;
rdma_wr->wr.sg_list = &ctx->reg->sge;
rdma_wr->wr.num_sge = 1;
rdma_wr->remote_addr = remote_addr;
rdma_wr->rkey = rkey;
if (dir == DMA_TO_DEVICE)
rdma_wr->wr.opcode = IB_WR_RDMA_WRITE;
else
rdma_wr->wr.opcode = IB_WR_RDMA_READ;
ctx->reg->reg_wr.wr.next = &rdma_wr->wr;
count++;
return count;
out_destroy_sig_mr:
ib_mr_pool_put(qp, &qp->sig_mrs, ctx->reg->mr);
out_free_ctx:
kfree(ctx->reg);
out_unmap_prot_sg:
if (prot_sg_cnt)
rdma_rw_unmap_sg(dev, prot_sg, prot_sg_cnt, dir);
out_unmap_sg:
rdma_rw_unmap_sg(dev, sg, sg_cnt, dir);
return ret;
}
EXPORT_SYMBOL(rdma_rw_ctx_signature_init);
/*
* Now that we are going to post the WRs we can update the lkey and need_inval
* state on the MRs. If we were doing this at init time, we would get double
* or missing invalidations if a context was initialized but not actually
* posted.
*/
static void rdma_rw_update_lkey(struct rdma_rw_reg_ctx *reg, bool need_inval)
{
reg->mr->need_inval = need_inval;
ib_update_fast_reg_key(reg->mr, ib_inc_rkey(reg->mr->lkey));
reg->reg_wr.key = reg->mr->lkey;
reg->sge.lkey = reg->mr->lkey;
}
/**
* rdma_rw_ctx_wrs - return chain of WRs for a RDMA READ or WRITE operation
* @ctx: context to operate on
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @cqe: completion queue entry for the last WR
* @chain_wr: WR to append to the posted chain
*
* Return the WR chain for the set of RDMA READ/WRITE operations described by
* @ctx, as well as any memory registration operations needed. If @chain_wr
* is non-NULL the WR it points to will be appended to the chain of WRs posted.
* If @chain_wr is not set @cqe must be set so that the caller gets a
* completion notification.
*/
struct ib_send_wr *rdma_rw_ctx_wrs(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
u32 port_num, struct ib_cqe *cqe, struct ib_send_wr *chain_wr)
{
struct ib_send_wr *first_wr, *last_wr;
int i;
switch (ctx->type) {
case RDMA_RW_SIG_MR:
case RDMA_RW_MR:
for (i = 0; i < ctx->nr_ops; i++) {
rdma_rw_update_lkey(&ctx->reg[i],
ctx->reg[i].wr.wr.opcode !=
IB_WR_RDMA_READ_WITH_INV);
}
if (ctx->reg[0].inv_wr.next)
first_wr = &ctx->reg[0].inv_wr;
else
first_wr = &ctx->reg[0].reg_wr.wr;
last_wr = &ctx->reg[ctx->nr_ops - 1].wr.wr;
break;
case RDMA_RW_MULTI_WR:
first_wr = &ctx->map.wrs[0].wr;
last_wr = &ctx->map.wrs[ctx->nr_ops - 1].wr;
break;
case RDMA_RW_SINGLE_WR:
first_wr = &ctx->single.wr.wr;
last_wr = &ctx->single.wr.wr;
break;
default:
BUG();
}
if (chain_wr) {
last_wr->next = chain_wr;
} else {
last_wr->wr_cqe = cqe;
last_wr->send_flags |= IB_SEND_SIGNALED;
}
return first_wr;
}
EXPORT_SYMBOL(rdma_rw_ctx_wrs);
/**
* rdma_rw_ctx_post - post a RDMA READ or RDMA WRITE operation
* @ctx: context to operate on
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @cqe: completion queue entry for the last WR
* @chain_wr: WR to append to the posted chain
*
* Post the set of RDMA READ/WRITE operations described by @ctx, as well as
* any memory registration operations needed. If @chain_wr is non-NULL the
* WR it points to will be appended to the chain of WRs posted. If @chain_wr
* is not set @cqe must be set so that the caller gets a completion
* notification.
*/
int rdma_rw_ctx_post(struct rdma_rw_ctx *ctx, struct ib_qp *qp, u32 port_num,
struct ib_cqe *cqe, struct ib_send_wr *chain_wr)
{
struct ib_send_wr *first_wr;
first_wr = rdma_rw_ctx_wrs(ctx, qp, port_num, cqe, chain_wr);
return ib_post_send(qp, first_wr, NULL);
}
EXPORT_SYMBOL(rdma_rw_ctx_post);
/**
* rdma_rw_ctx_destroy - release all resources allocated by rdma_rw_ctx_init
* @ctx: context to release
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @sg: scatterlist that was used for the READ/WRITE
* @sg_cnt: number of entries in @sg
* @dir: %DMA_TO_DEVICE for RDMA WRITE, %DMA_FROM_DEVICE for RDMA READ
*/
void rdma_rw_ctx_destroy(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
u32 port_num, struct scatterlist *sg, u32 sg_cnt,
enum dma_data_direction dir)
{
int i;
switch (ctx->type) {
case RDMA_RW_MR:
for (i = 0; i < ctx->nr_ops; i++)
ib_mr_pool_put(qp, &qp->rdma_mrs, ctx->reg[i].mr);
kfree(ctx->reg);
break;
case RDMA_RW_MULTI_WR:
kfree(ctx->map.wrs);
kfree(ctx->map.sges);
break;
case RDMA_RW_SINGLE_WR:
break;
default:
BUG();
break;
}
rdma_rw_unmap_sg(qp->pd->device, sg, sg_cnt, dir);
}
EXPORT_SYMBOL(rdma_rw_ctx_destroy);
/**
* rdma_rw_ctx_destroy_signature - release all resources allocated by
* rdma_rw_ctx_signature_init
* @ctx: context to release
* @qp: queue pair to operate on
* @port_num: port num to which the connection is bound
* @sg: scatterlist that was used for the READ/WRITE
* @sg_cnt: number of entries in @sg
* @prot_sg: scatterlist that was used for the READ/WRITE of the PI
* @prot_sg_cnt: number of entries in @prot_sg
* @dir: %DMA_TO_DEVICE for RDMA WRITE, %DMA_FROM_DEVICE for RDMA READ
*/
void rdma_rw_ctx_destroy_signature(struct rdma_rw_ctx *ctx, struct ib_qp *qp,
u32 port_num, struct scatterlist *sg, u32 sg_cnt,
struct scatterlist *prot_sg, u32 prot_sg_cnt,
enum dma_data_direction dir)
{
if (WARN_ON_ONCE(ctx->type != RDMA_RW_SIG_MR))
return;
ib_mr_pool_put(qp, &qp->sig_mrs, ctx->reg->mr);
kfree(ctx->reg);
if (prot_sg_cnt)
rdma_rw_unmap_sg(qp->pd->device, prot_sg, prot_sg_cnt, dir);
rdma_rw_unmap_sg(qp->pd->device, sg, sg_cnt, dir);
}
EXPORT_SYMBOL(rdma_rw_ctx_destroy_signature);
/**
* rdma_rw_mr_factor - return number of MRs required for a payload
* @device: device handling the connection
* @port_num: port num to which the connection is bound
* @maxpages: maximum payload pages per rdma_rw_ctx
*
* Returns the number of MRs the device requires to move @maxpayload
* bytes. The returned value is used during transport creation to
* compute max_rdma_ctxts and the size of the transport's Send and
* Send Completion Queues.
*/
unsigned int rdma_rw_mr_factor(struct ib_device *device, u32 port_num,
unsigned int maxpages)
{
unsigned int mr_pages;
if (rdma_rw_can_use_mr(device, port_num))
mr_pages = rdma_rw_fr_page_list_len(device, false);
else
mr_pages = device->attrs.max_sge_rd;
return DIV_ROUND_UP(maxpages, mr_pages);
}
EXPORT_SYMBOL(rdma_rw_mr_factor);
void rdma_rw_init_qp(struct ib_device *dev, struct ib_qp_init_attr *attr)
{
u32 factor;
WARN_ON_ONCE(attr->port_num == 0);
/*
* Each context needs at least one RDMA READ or WRITE WR.
*
* For some hardware we might need more, eventually we should ask the
* HCA driver for a multiplier here.
*/
factor = 1;
/*
* If the devices needs MRs to perform RDMA READ or WRITE operations,
* we'll need two additional MRs for the registrations and the
* invalidation.
*/
if (attr->create_flags & IB_QP_CREATE_INTEGRITY_EN ||
rdma_rw_can_use_mr(dev, attr->port_num))
factor += 2; /* inv + reg */
attr->cap.max_send_wr += factor * attr->cap.max_rdma_ctxs;
/*
* But maybe we were just too high in the sky and the device doesn't
* even support all we need, and we'll have to live with what we get..
*/
attr->cap.max_send_wr =
min_t(u32, attr->cap.max_send_wr, dev->attrs.max_qp_wr);
}
int rdma_rw_init_mrs(struct ib_qp *qp, struct ib_qp_init_attr *attr)
{
struct ib_device *dev = qp->pd->device;
u32 nr_mrs = 0, nr_sig_mrs = 0, max_num_sg = 0;
int ret = 0;
if (attr->create_flags & IB_QP_CREATE_INTEGRITY_EN) {
nr_sig_mrs = attr->cap.max_rdma_ctxs;
nr_mrs = attr->cap.max_rdma_ctxs;
max_num_sg = rdma_rw_fr_page_list_len(dev, true);
} else if (rdma_rw_can_use_mr(dev, attr->port_num)) {
nr_mrs = attr->cap.max_rdma_ctxs;
max_num_sg = rdma_rw_fr_page_list_len(dev, false);
}
if (nr_mrs) {
ret = ib_mr_pool_init(qp, &qp->rdma_mrs, nr_mrs,
IB_MR_TYPE_MEM_REG,
max_num_sg, 0);
if (ret) {
pr_err("%s: failed to allocated %d MRs\n",
__func__, nr_mrs);
return ret;
}
}
if (nr_sig_mrs) {
ret = ib_mr_pool_init(qp, &qp->sig_mrs, nr_sig_mrs,
IB_MR_TYPE_INTEGRITY, max_num_sg, max_num_sg);
if (ret) {
pr_err("%s: failed to allocated %d SIG MRs\n",
__func__, nr_sig_mrs);
goto out_free_rdma_mrs;
}
}
return 0;
out_free_rdma_mrs:
ib_mr_pool_destroy(qp, &qp->rdma_mrs);
return ret;
}
void rdma_rw_cleanup_mrs(struct ib_qp *qp)
{
ib_mr_pool_destroy(qp, &qp->sig_mrs);
ib_mr_pool_destroy(qp, &qp->rdma_mrs);
}