forked from Minki/linux
de85d79f4a
Add mfd driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This is a somewhat minimal version which adds irqchip support and cells for: ACPI PMIC opregion support, the i2c-controller driving the external charger irc and the pwrsrc/extcon block. Further cells can be added in the future if/when drivers are upstreamed for them. [The above patch caused a build error on some archetectures] From: Arnd Bergmann <arnd@arndb.de> I ran into a build error on ARM with a platform that has a non-standard clk implementation: drivers/clk/clk.o: In function `clk_disable': clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here drivers/clk/clk.o: In function `clk_enable': clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable' arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here The problem is a device driver that uses 'select COMMON_CLK', which is generally a bad idea: selecting a subsystem should only be done from a platform, otherwise we run into circular dependencies. The same driver also selects 'GPIOLIB' and 'I2C', which has a similar effect. This turns all three into 'depends on', as it should be. Finally, we can limit the build to x86, unless we are compile testing. First patch: Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Fix for first patch (squashed): Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
231 lines
5.9 KiB
C
231 lines
5.9 KiB
C
/*
|
|
* MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
|
|
*
|
|
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
|
|
* Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/intel_soc_pmic.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* PMIC device registers */
|
|
#define REG_OFFSET_MASK GENMASK(7, 0)
|
|
#define REG_ADDR_MASK GENMASK(15, 8)
|
|
#define REG_ADDR_SHIFT 8
|
|
|
|
#define CHT_WC_IRQLVL1 0x6e02
|
|
#define CHT_WC_IRQLVL1_MASK 0x6e0e
|
|
|
|
/* Whiskey Cove PMIC share same ACPI ID between different platforms */
|
|
#define CHT_WC_HRV 3
|
|
|
|
/* Level 1 IRQs (level 2 IRQs are handled in the child device drivers) */
|
|
enum {
|
|
CHT_WC_PWRSRC_IRQ = 0,
|
|
CHT_WC_THRM_IRQ,
|
|
CHT_WC_BCU_IRQ,
|
|
CHT_WC_ADC_IRQ,
|
|
CHT_WC_EXT_CHGR_IRQ,
|
|
CHT_WC_GPIO_IRQ,
|
|
/* There is no irq 6 */
|
|
CHT_WC_CRIT_IRQ = 7,
|
|
};
|
|
|
|
static struct resource cht_wc_pwrsrc_resources[] = {
|
|
DEFINE_RES_IRQ(CHT_WC_PWRSRC_IRQ),
|
|
};
|
|
|
|
static struct resource cht_wc_ext_charger_resources[] = {
|
|
DEFINE_RES_IRQ(CHT_WC_EXT_CHGR_IRQ),
|
|
};
|
|
|
|
static struct mfd_cell cht_wc_dev[] = {
|
|
{
|
|
.name = "cht_wcove_pwrsrc",
|
|
.num_resources = ARRAY_SIZE(cht_wc_pwrsrc_resources),
|
|
.resources = cht_wc_pwrsrc_resources,
|
|
}, {
|
|
.name = "cht_wcove_ext_chgr",
|
|
.num_resources = ARRAY_SIZE(cht_wc_ext_charger_resources),
|
|
.resources = cht_wc_ext_charger_resources,
|
|
},
|
|
{ .name = "cht_wcove_region", },
|
|
};
|
|
|
|
/*
|
|
* The CHT Whiskey Cove covers multiple I2C addresses, with a 1 Byte
|
|
* register address space per I2C address, so we use 16 bit register
|
|
* addresses where the high 8 bits contain the I2C client address.
|
|
*/
|
|
static int cht_wc_byte_reg_read(void *context, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
struct i2c_client *client = context;
|
|
int ret, orig_addr = client->addr;
|
|
|
|
if (!(reg & REG_ADDR_MASK)) {
|
|
dev_err(&client->dev, "Error I2C address not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
|
|
ret = i2c_smbus_read_byte_data(client, reg & REG_OFFSET_MASK);
|
|
client->addr = orig_addr;
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret;
|
|
return 0;
|
|
}
|
|
|
|
static int cht_wc_byte_reg_write(void *context, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct i2c_client *client = context;
|
|
int ret, orig_addr = client->addr;
|
|
|
|
if (!(reg & REG_ADDR_MASK)) {
|
|
dev_err(&client->dev, "Error I2C address not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
client->addr = (reg & REG_ADDR_MASK) >> REG_ADDR_SHIFT;
|
|
ret = i2c_smbus_write_byte_data(client, reg & REG_OFFSET_MASK, val);
|
|
client->addr = orig_addr;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regmap_config cht_wc_regmap_cfg = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.reg_write = cht_wc_byte_reg_write,
|
|
.reg_read = cht_wc_byte_reg_read,
|
|
};
|
|
|
|
static const struct regmap_irq cht_wc_regmap_irqs[] = {
|
|
REGMAP_IRQ_REG(CHT_WC_PWRSRC_IRQ, 0, BIT(CHT_WC_PWRSRC_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_THRM_IRQ, 0, BIT(CHT_WC_THRM_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_BCU_IRQ, 0, BIT(CHT_WC_BCU_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_ADC_IRQ, 0, BIT(CHT_WC_ADC_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_EXT_CHGR_IRQ, 0, BIT(CHT_WC_EXT_CHGR_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_GPIO_IRQ, 0, BIT(CHT_WC_GPIO_IRQ)),
|
|
REGMAP_IRQ_REG(CHT_WC_CRIT_IRQ, 0, BIT(CHT_WC_CRIT_IRQ)),
|
|
};
|
|
|
|
static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
|
|
.name = "cht_wc_irq_chip",
|
|
.status_base = CHT_WC_IRQLVL1,
|
|
.mask_base = CHT_WC_IRQLVL1_MASK,
|
|
.irqs = cht_wc_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(cht_wc_regmap_irqs),
|
|
.num_regs = 1,
|
|
};
|
|
|
|
static int cht_wc_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct intel_soc_pmic *pmic;
|
|
acpi_status status;
|
|
unsigned long long hrv;
|
|
int ret;
|
|
|
|
status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
|
|
if (ACPI_FAILURE(status)) {
|
|
dev_err(dev, "Failed to get PMIC hardware revision\n");
|
|
return -ENODEV;
|
|
}
|
|
if (hrv != CHT_WC_HRV) {
|
|
dev_err(dev, "Invalid PMIC hardware revision: %llu\n", hrv);
|
|
return -ENODEV;
|
|
}
|
|
if (client->irq < 0) {
|
|
dev_err(dev, "Invalid IRQ\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
|
|
if (!pmic)
|
|
return -ENOMEM;
|
|
|
|
pmic->irq = client->irq;
|
|
pmic->dev = dev;
|
|
i2c_set_clientdata(client, pmic);
|
|
|
|
pmic->regmap = devm_regmap_init(dev, NULL, client, &cht_wc_regmap_cfg);
|
|
if (IS_ERR(pmic->regmap))
|
|
return PTR_ERR(pmic->regmap);
|
|
|
|
ret = devm_regmap_add_irq_chip(dev, pmic->regmap, pmic->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED, 0,
|
|
&cht_wc_regmap_irq_chip,
|
|
&pmic->irq_chip_data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
|
|
cht_wc_dev, ARRAY_SIZE(cht_wc_dev), NULL, 0,
|
|
regmap_irq_get_domain(pmic->irq_chip_data));
|
|
}
|
|
|
|
static void cht_wc_shutdown(struct i2c_client *client)
|
|
{
|
|
struct intel_soc_pmic *pmic = i2c_get_clientdata(client);
|
|
|
|
disable_irq(pmic->irq);
|
|
}
|
|
|
|
static int __maybe_unused cht_wc_suspend(struct device *dev)
|
|
{
|
|
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
|
|
|
|
disable_irq(pmic->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused cht_wc_resume(struct device *dev)
|
|
{
|
|
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
|
|
|
|
enable_irq(pmic->irq);
|
|
|
|
return 0;
|
|
}
|
|
static SIMPLE_DEV_PM_OPS(cht_wc_pm_ops, cht_wc_suspend, cht_wc_resume);
|
|
|
|
static const struct i2c_device_id cht_wc_i2c_id[] = {
|
|
{ }
|
|
};
|
|
|
|
static const struct acpi_device_id cht_wc_acpi_ids[] = {
|
|
{ "INT34D3", },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver cht_wc_driver = {
|
|
.driver = {
|
|
.name = "CHT Whiskey Cove PMIC",
|
|
.pm = &cht_wc_pm_ops,
|
|
.acpi_match_table = cht_wc_acpi_ids,
|
|
},
|
|
.probe_new = cht_wc_probe,
|
|
.shutdown = cht_wc_shutdown,
|
|
.id_table = cht_wc_i2c_id,
|
|
};
|
|
builtin_i2c_driver(cht_wc_driver);
|