forked from Minki/linux
cb932e12d9
When using platform_driver instantiation, the i2c bus was given bus number 0. The kirkwood-t5325 audio driver has this bus number hard coded for the address of the codec. However by default device tree i2c busses are dynamically allocated a bus number, starting from 1. Thus the kirkwood-t5325 cannot find its audio codec. By adding an alias in the DT file we can control the bus number and set it to 0. The codec can then be found. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
325 lines
7.2 KiB
Plaintext
325 lines
7.2 KiB
Plaintext
/include/ "skeleton.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
compatible = "marvell,kirkwood";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "marvell,feroceon";
|
|
reg = <0>;
|
|
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
|
|
clock-names = "cpu_clk", "ddrclk", "powersave";
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
i2c0 = &i2c0;
|
|
};
|
|
|
|
mbus {
|
|
compatible = "marvell,kirkwood-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
/* If a board file needs to change this ranges it must replace it completely */
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
|
|
MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
|
|
MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
|
|
>;
|
|
controller = <&mbusc>;
|
|
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
|
|
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
|
|
|
|
crypto@0301 {
|
|
compatible = "marvell,orion-crypto";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
|
|
<MBUS_ID(0x03, 0x01) 0 0x800>;
|
|
reg-names = "regs", "sram";
|
|
interrupts = <22>;
|
|
clocks = <&gate_clk 17>;
|
|
status = "okay";
|
|
};
|
|
|
|
nand: nand@012f {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cle = <0>;
|
|
ale = <1>;
|
|
bank-width = <1>;
|
|
compatible = "marvell,orion-nand";
|
|
reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
|
|
chip-delay = <25>;
|
|
/* set partition map and/or chip-delay in board dts */
|
|
clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
ocp@f1000000 {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xf1000000 0x0100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
core_clk: core-clocks@10030 {
|
|
compatible = "marvell,kirkwood-core-clock";
|
|
reg = <0x10030 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
spi@10600 {
|
|
compatible = "marvell,orion-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <23>;
|
|
reg = <0x10600 0x28>;
|
|
clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@10100 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x10100 0x40>;
|
|
ngpios = <32>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <35>, <36>, <37>, <38>;
|
|
clocks = <&gate_clk 7>;
|
|
};
|
|
|
|
gpio1: gpio@10140 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x10140 0x40>;
|
|
ngpios = <18>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <39>, <40>, <41>;
|
|
clocks = <&gate_clk 7>;
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
reg = <0x11000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <29>;
|
|
clock-frequency = <100000>;
|
|
clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@12000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <33>;
|
|
clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@12100 {
|
|
compatible = "ns16550a";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <34>;
|
|
clocks = <&gate_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x80>, <0x1500 0x20>;
|
|
};
|
|
|
|
system-controller@20000 {
|
|
compatible = "marvell,orion-system-controller";
|
|
reg = <0x20000 0x120>;
|
|
};
|
|
|
|
bridge_intc: bridge-interrupt-ctrl@20110 {
|
|
compatible = "marvell,orion-bridge-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20110 0x8>;
|
|
interrupts = <1>;
|
|
marvell,#interrupts = <6>;
|
|
};
|
|
|
|
gate_clk: clock-gating-control@2011c {
|
|
compatible = "marvell,kirkwood-gating-clock";
|
|
reg = <0x2011c 0x4>;
|
|
clocks = <&core_clk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
l2: l2-cache@20128 {
|
|
compatible = "marvell,kirkwood-cache";
|
|
reg = <0x20128 0x4>;
|
|
};
|
|
|
|
intc: main-interrupt-ctrl@20200 {
|
|
compatible = "marvell,orion-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20200 0x10>, <0x20210 0x10>;
|
|
};
|
|
|
|
timer: timer@20300 {
|
|
compatible = "marvell,orion-timer";
|
|
reg = <0x20300 0x20>;
|
|
interrupt-parent = <&bridge_intc>;
|
|
interrupts = <1>, <2>;
|
|
clocks = <&core_clk 0>;
|
|
};
|
|
|
|
wdt: watchdog-timer@20300 {
|
|
compatible = "marvell,orion-wdt";
|
|
reg = <0x20300 0x28>, <0x20108 0x4>;
|
|
interrupt-parent = <&bridge_intc>;
|
|
interrupts = <3>;
|
|
clocks = <&gate_clk 7>;
|
|
status = "okay";
|
|
};
|
|
|
|
ehci@50000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x1000>;
|
|
interrupts = <19>;
|
|
clocks = <&gate_clk 3>;
|
|
status = "okay";
|
|
};
|
|
|
|
xor@60800 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60A00 0x100>;
|
|
status = "okay";
|
|
clocks = <&gate_clk 8>;
|
|
|
|
xor00 {
|
|
interrupts = <5>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <6>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
xor@60900 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60B00 0x100>;
|
|
status = "okay";
|
|
clocks = <&gate_clk 16>;
|
|
|
|
xor00 {
|
|
interrupts = <7>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <8>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
eth0: ethernet-controller@72000 {
|
|
compatible = "marvell,kirkwood-eth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x72000 0x4000>;
|
|
clocks = <&gate_clk 0>;
|
|
marvell,tx-checksum-limit = <1600>;
|
|
status = "disabled";
|
|
|
|
ethernet0-port@0 {
|
|
compatible = "marvell,kirkwood-eth-port";
|
|
reg = <0>;
|
|
interrupts = <11>;
|
|
/* overwrite MAC address in bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
/* set phy-handle property in board file */
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus@72004 {
|
|
compatible = "marvell,orion-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x72004 0x84>;
|
|
interrupts = <46>;
|
|
clocks = <&gate_clk 0>;
|
|
status = "disabled";
|
|
|
|
/* add phy nodes in board file */
|
|
};
|
|
|
|
eth1: ethernet-controller@76000 {
|
|
compatible = "marvell,kirkwood-eth";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x76000 0x4000>;
|
|
clocks = <&gate_clk 19>;
|
|
marvell,tx-checksum-limit = <1600>;
|
|
status = "disabled";
|
|
|
|
ethernet1-port@0 {
|
|
compatible = "marvell,kirkwood-eth-port";
|
|
reg = <0>;
|
|
interrupts = <15>;
|
|
/* overwrite MAC address in bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
/* set phy-handle property in board file */
|
|
};
|
|
};
|
|
|
|
sata_phy0: sata-phy@82000 {
|
|
compatible = "marvell,mvebu-sata-phy";
|
|
reg = <0x82000 0x0334>;
|
|
clocks = <&gate_clk 14>;
|
|
clock-names = "sata";
|
|
#phy-cells = <0>;
|
|
status = "ok";
|
|
};
|
|
|
|
sata_phy1: sata-phy@84000 {
|
|
compatible = "marvell,mvebu-sata-phy";
|
|
reg = <0x84000 0x0334>;
|
|
clocks = <&gate_clk 15>;
|
|
clock-names = "sata";
|
|
#phy-cells = <0>;
|
|
status = "ok";
|
|
};
|
|
|
|
audio0: audio-controller@a0000 {
|
|
compatible = "marvell,kirkwood-audio";
|
|
reg = <0xa0000 0x2210>;
|
|
interrupts = <24>;
|
|
clocks = <&gate_clk 9>;
|
|
clock-names = "internal";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|