forked from Minki/linux
a233bb742a
DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJU4u0bAAoJEIwa5zzehBx3XFQP+wbVDp39ay3SRanFWeXqhfTe 6jRsYrOcq6BN/b1NugjD+yKIYp2MQhwlXbMmj/1vnmJ3XSY25ZMLlgs0/vsNk7W2 5e0xySwdhd1DjsajhZyN+5gUgqcTgOof/V+CbEUkijDDJ9v/WJbGZrpCHDz+UVTh dG9p1vrKoxDELAVbnp9muKZPlaQkAM60zJcHNJw9bJB5M0RCx4XFwPZc1cDLIsIZ lK/uYpKsgvgrGw5QuCtEK1/NkqLkBqgBfVg6xq0VB6OCYetqpxqs7kSZjnncIhQc PvxShsIJzb/dgfk7xBVb1+4Jfe5L/4poFwS69QuBlr/wiwc7wrhv37edgkyDlclS aj5xfOIhQdDaTkknFVs4QEkGAFg/lnTZnmiNiQdlsmDHqbWdTEELKShdVeMO7Zsg 6bPdDipA2jsQ86UWNwucis8QulzVTuyNuU+Mlrxp73b76+hKXLkbYcZ51FJ/xMD8 wLpCGqtc9Quirdb7Wy7XiVfesv3lKfDmzZB/6ZJ6zfadDvsqJPxAjNTA8VYZ9YeT EyW4K6CMOa5v+sLmIQUsAjKCYaul3PVDCi4voQjpS1ZtPLw+WN3zqX5XZZDT9Ll2 D1ycmInp/40KsQgjV36u1NlIKMM+oaUJaSzaSPGdgj3Zcw0YZi8O+h0m6iHrlzUB uGFufsLKmcOFY/sLwprt =XEw1 -----END PGP SIGNATURE----- Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
467 lines
11 KiB
Plaintext
467 lines
11 KiB
Plaintext
/*
|
|
* Samsung's Exynos4210 based Trats board device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Device tree source file for Samsung's Trats board which is based on
|
|
* Samsung's Exynos4210 SoC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4210.dtsi"
|
|
|
|
/ {
|
|
model = "Samsung Trats based on Exynos4210";
|
|
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
|
|
|
|
memory {
|
|
reg = <0x40000000 0x10000000
|
|
0x50000000 0x10000000
|
|
0x60000000 0x10000000
|
|
0x70000000 0x10000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
|
stdout-path = &serial_2;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
|
|
vemmc_reg: regulator-0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VMEM_VDD_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpk0 2 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
tsp_reg: regulator-1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "TSP_FIXED_VOLTAGES";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpl0 3 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
cam_af_28v_reg: regulator-2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "8M_AF_2.8V_EN";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpk1 1 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
cam_io_en_reg: regulator-3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "CAM_IO_EN";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpe2 1 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
cam_io_12v_reg: regulator-4 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "8M_1.2V_EN";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
gpio = <&gpe2 5 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vt_core_15v_reg: regulator-5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VT_CORE_1.5V";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
gpio = <&gpe2 2 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
hsotg@12480000 {
|
|
vusb_d-supply = <&vusb_reg>;
|
|
vusb_a-supply = <&vusbdac_reg>;
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci_emmc: sdhci@12510000 {
|
|
bus-width = <8>;
|
|
non-removable;
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&vemmc_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
exynos-usbphy@125B0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13800000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13810000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13820000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@13830000 {
|
|
status = "okay";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
vol-down-key {
|
|
gpios = <&gpx2 1 1>;
|
|
linux,code = <114>;
|
|
label = "volume down";
|
|
debounce-interval = <10>;
|
|
};
|
|
|
|
vol-up-key {
|
|
gpios = <&gpx2 0 1>;
|
|
linux,code = <115>;
|
|
label = "volume up";
|
|
debounce-interval = <10>;
|
|
};
|
|
|
|
power-key {
|
|
gpios = <&gpx2 7 1>;
|
|
linux,code = <116>;
|
|
label = "power";
|
|
debounce-interval = <10>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
ok-key {
|
|
gpios = <&gpx3 5 1>;
|
|
linux,code = <352>;
|
|
label = "ok";
|
|
debounce-interval = <10>;
|
|
};
|
|
};
|
|
|
|
i2c@13890000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
mms114-touchscreen@48 {
|
|
compatible = "melfas,mms114";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <4 2>;
|
|
x-size = <720>;
|
|
y-size = <1280>;
|
|
avdd-supply = <&tsp_reg>;
|
|
vdd-supply = <&tsp_reg>;
|
|
};
|
|
};
|
|
|
|
i2c@138B0000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
pinctrl-0 = <&i2c5_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
max8997_pmic@66 {
|
|
compatible = "maxim,max8997-pmic";
|
|
|
|
reg = <0x66>;
|
|
|
|
max8997,pmic-buck1-uses-gpio-dvs;
|
|
max8997,pmic-buck2-uses-gpio-dvs;
|
|
max8997,pmic-buck5-uses-gpio-dvs;
|
|
|
|
max8997,pmic-ignore-gpiodvs-side-effect;
|
|
max8997,pmic-buck125-default-dvs-idx = <0>;
|
|
|
|
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
|
|
<&gpx0 6 0>,
|
|
<&gpl0 0 0>;
|
|
|
|
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
|
|
<1250000>, <1200000>,
|
|
<1150000>, <1100000>,
|
|
<1000000>, <950000>;
|
|
|
|
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
|
|
<950000>, <900000>,
|
|
<1100000>, <1000000>,
|
|
<950000>, <900000>;
|
|
|
|
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
|
|
regulators {
|
|
valive_reg: LDO2 {
|
|
regulator-name = "VALIVE_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb_reg: LDO3 {
|
|
regulator-name = "VUSB_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
vmipi_reg: LDO4 {
|
|
regulator-name = "VMIPI_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vpda_reg: LDO6 {
|
|
regulator-name = "VCC_1.8V_PDA";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcam_reg: LDO7 {
|
|
regulator-name = "CAM_ISP_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vusbdac_reg: LDO8 {
|
|
regulator-name = "VUSB/VDAC_3.3V_C210";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vccpda_reg: LDO9 {
|
|
regulator-name = "VCC_2.8V_PDA";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: LDO10 {
|
|
regulator-name = "VPLL_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vtcam_reg: LDO12 {
|
|
regulator-name = "VT_CAM_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vcclcd_reg: LDO13 {
|
|
regulator-name = "VCC_3.3V_LCD";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vlcd_reg: LDO15 {
|
|
regulator-name = "VLCD_2.2V";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
};
|
|
|
|
camsensor_reg: LDO16 {
|
|
regulator-name = "CAM_SENSOR_IO_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vddq_reg: LDO21 {
|
|
regulator-name = "VDDQ_M1M2_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
varm_breg: BUCK1 {
|
|
/*
|
|
* HACK: The real name is VARM_1.2V_C210,
|
|
* but exynos-cpufreq does not support
|
|
* DT-based regulator lookup yet.
|
|
*/
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vint_breg: BUCK2 {
|
|
regulator-name = "VINT_1.1V_C210";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
camisp_breg: BUCK4 {
|
|
regulator-name = "CAM_ISP_CORE_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vmem_breg: BUCK5 {
|
|
regulator-name = "VMEM_1.2V_C210";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccsub_breg: BUCK7 {
|
|
regulator-name = "VCC_SUB_2.0V";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
safe1_sreg: ESAFEOUT1 {
|
|
regulator-name = "SAFEOUT1";
|
|
regulator-always-on;
|
|
};
|
|
|
|
safe2_sreg: ESAFEOUT2 {
|
|
regulator-name = "SAFEOUT2";
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
dsi_0: dsi@11C80000 {
|
|
vddcore-supply = <&vusb_reg>;
|
|
vddio-supply = <&vmipi_reg>;
|
|
samsung,pll-clock-frequency = <24000000>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
dsi_out: endpoint {
|
|
remote-endpoint = <&dsi_in>;
|
|
samsung,burst-clock-frequency = <500000000>;
|
|
samsung,esc-clock-frequency = <20000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel@0 {
|
|
reg = <0>;
|
|
compatible = "samsung,s6e8aa0";
|
|
vdd3-supply = <&vcclcd_reg>;
|
|
vci-supply = <&vlcd_reg>;
|
|
reset-gpios = <&gpy4 5 0>;
|
|
power-on-delay= <50>;
|
|
reset-delay = <100>;
|
|
init-delay = <100>;
|
|
flip-horizontal;
|
|
flip-vertical;
|
|
panel-width-mm = <58>;
|
|
panel-height-mm = <103>;
|
|
|
|
display-timings {
|
|
timing-0 {
|
|
clock-frequency = <57153600>;
|
|
hactive = <720>;
|
|
vactive = <1280>;
|
|
hfront-porch = <5>;
|
|
hback-porch = <5>;
|
|
hsync-len = <5>;
|
|
vfront-porch = <13>;
|
|
vback-porch = <1>;
|
|
vsync-len = <2>;
|
|
};
|
|
};
|
|
|
|
port {
|
|
dsi_in: endpoint {
|
|
remote-endpoint = <&dsi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
fimd@11c00000 {
|
|
status = "okay";
|
|
};
|
|
|
|
camera {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <>;
|
|
status = "okay";
|
|
|
|
fimc_0: fimc@11800000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
|
|
<&clock CLK_SCLK_FIMC0>;
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
|
assigned-clock-rates = <0>, <160000000>;
|
|
};
|
|
|
|
fimc_1: fimc@11810000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
|
|
<&clock CLK_SCLK_FIMC1>;
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
|
assigned-clock-rates = <0>, <160000000>;
|
|
};
|
|
|
|
fimc_2: fimc@11820000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
|
|
<&clock CLK_SCLK_FIMC2>;
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
|
assigned-clock-rates = <0>, <160000000>;
|
|
};
|
|
|
|
fimc_3: fimc@11830000 {
|
|
status = "okay";
|
|
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
|
|
<&clock CLK_SCLK_FIMC3>;
|
|
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
|
|
assigned-clock-rates = <0>, <160000000>;
|
|
};
|
|
};
|
|
};
|