forked from Minki/linux
dbfbe717cc
The DP 1.4 spec defines the SDP header and SDP contents for a Picture Parameter Set (PPS) that must be sent in advance of DSC transmission to define the encoding characteristics. This was done in one struct, drm_dsc_pps_infoframe, which conatined the SDP header and PPS. Because the PPS is a property of DSC over any connector, not just DP, and because drm drivers may have their own SDP structs they wish to use, make the functions that initialise SDP and PPS headers take the components they operate on, not drm_dsc_pps_infoframe, Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
610 lines
16 KiB
C
610 lines
16 KiB
C
/* SPDX-License-Identifier: MIT
|
|
* Copyright (C) 2018 Intel Corp.
|
|
*
|
|
* Authors:
|
|
* Manasi Navare <manasi.d.navare@intel.com>
|
|
*/
|
|
|
|
#ifndef DRM_DSC_H_
|
|
#define DRM_DSC_H_
|
|
|
|
#include <drm/drm_dp_helper.h>
|
|
|
|
/* VESA Display Stream Compression DSC 1.2 constants */
|
|
#define DSC_NUM_BUF_RANGES 15
|
|
#define DSC_MUX_WORD_SIZE_8_10_BPC 48
|
|
#define DSC_MUX_WORD_SIZE_12_BPC 64
|
|
#define DSC_RC_PIXELS_PER_GROUP 3
|
|
#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
|
|
#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
|
|
|
|
/* DSC Rate Control Constants */
|
|
#define DSC_RC_MODEL_SIZE_CONST 8192
|
|
#define DSC_RC_EDGE_FACTOR_CONST 6
|
|
#define DSC_RC_TGT_OFFSET_HI_CONST 3
|
|
#define DSC_RC_TGT_OFFSET_LO_CONST 3
|
|
|
|
/* DSC PPS constants and macros */
|
|
#define DSC_PPS_VERSION_MAJOR_SHIFT 4
|
|
#define DSC_PPS_BPC_SHIFT 4
|
|
#define DSC_PPS_MSB_SHIFT 8
|
|
#define DSC_PPS_LSB_MASK (0xFF << 0)
|
|
#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8)
|
|
#define DSC_PPS_VBR_EN_SHIFT 2
|
|
#define DSC_PPS_SIMPLE422_SHIFT 3
|
|
#define DSC_PPS_CONVERT_RGB_SHIFT 4
|
|
#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5
|
|
#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8)
|
|
#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8)
|
|
#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4
|
|
#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
|
|
#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
|
|
#define DSC_PPS_NATIVE_420_SHIFT 1
|
|
#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
|
|
#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
|
|
#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
|
|
|
|
/**
|
|
* struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
|
|
*
|
|
* This defines different rate control parameters used by the DSC engine
|
|
* to compress the frame.
|
|
*/
|
|
struct drm_dsc_rc_range_parameters {
|
|
/**
|
|
* @range_min_qp: Min Quantization Parameters allowed for this range
|
|
*/
|
|
u8 range_min_qp;
|
|
/**
|
|
* @range_max_qp: Max Quantization Parameters allowed for this range
|
|
*/
|
|
u8 range_max_qp;
|
|
/**
|
|
* @range_bpg_offset:
|
|
* Bits/group offset to apply to target for this group
|
|
*/
|
|
u8 range_bpg_offset;
|
|
};
|
|
|
|
/**
|
|
* struct drm_dsc_config - Parameters required to configure DSC
|
|
*
|
|
* Driver populates this structure with all the parameters required
|
|
* to configure the display stream compression on the source.
|
|
*/
|
|
struct drm_dsc_config {
|
|
/**
|
|
* @line_buf_depth:
|
|
* Bits per component for previous reconstructed line buffer
|
|
*/
|
|
u8 line_buf_depth;
|
|
/**
|
|
* @bits_per_component: Bits per component to code (8/10/12)
|
|
*/
|
|
u8 bits_per_component;
|
|
/**
|
|
* @convert_rgb:
|
|
* Flag to indicate if RGB - YCoCg conversion is needed
|
|
* True if RGB input, False if YCoCg input
|
|
*/
|
|
bool convert_rgb;
|
|
/**
|
|
* @slice_count: Number fo slices per line used by the DSC encoder
|
|
*/
|
|
u8 slice_count;
|
|
/**
|
|
* @slice_width: Width of each slice in pixels
|
|
*/
|
|
u16 slice_width;
|
|
/**
|
|
* @slice_height: Slice height in pixels
|
|
*/
|
|
u16 slice_height;
|
|
/**
|
|
* @simple_422: True if simple 4_2_2 mode is enabled else False
|
|
*/
|
|
bool simple_422;
|
|
/**
|
|
* @pic_width: Width of the input display frame in pixels
|
|
*/
|
|
u16 pic_width;
|
|
/**
|
|
* @pic_height: Vertical height of the input display frame
|
|
*/
|
|
u16 pic_height;
|
|
/**
|
|
* @rc_tgt_offset_high:
|
|
* Offset to bits/group used by RC to determine QP adjustment
|
|
*/
|
|
u8 rc_tgt_offset_high;
|
|
/**
|
|
* @rc_tgt_offset_low:
|
|
* Offset to bits/group used by RC to determine QP adjustment
|
|
*/
|
|
u8 rc_tgt_offset_low;
|
|
/**
|
|
* @bits_per_pixel:
|
|
* Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
|
|
*/
|
|
u16 bits_per_pixel;
|
|
/**
|
|
* @rc_edge_factor:
|
|
* Factor to determine if an edge is present based on the bits produced
|
|
*/
|
|
u8 rc_edge_factor;
|
|
/**
|
|
* @rc_quant_incr_limit1:
|
|
* Slow down incrementing once the range reaches this value
|
|
*/
|
|
u8 rc_quant_incr_limit1;
|
|
/**
|
|
* @rc_quant_incr_limit0:
|
|
* Slow down incrementing once the range reaches this value
|
|
*/
|
|
u8 rc_quant_incr_limit0;
|
|
/**
|
|
* @initial_xmit_delay:
|
|
* Number of pixels to delay the initial transmission
|
|
*/
|
|
u16 initial_xmit_delay;
|
|
/**
|
|
* @initial_dec_delay:
|
|
* Initial decoder delay, number of pixel times that the decoder
|
|
* accumulates data in its rate buffer before starting to decode
|
|
* and output pixels.
|
|
*/
|
|
u16 initial_dec_delay;
|
|
/**
|
|
* @block_pred_enable:
|
|
* True if block prediction is used to code any groups within the
|
|
* picture. False if BP not used
|
|
*/
|
|
bool block_pred_enable;
|
|
/**
|
|
* @first_line_bpg_offset:
|
|
* Number of additional bits allocated for each group on the first
|
|
* line of slice.
|
|
*/
|
|
u8 first_line_bpg_offset;
|
|
/**
|
|
* @initial_offset: Value to use for RC model offset at slice start
|
|
*/
|
|
u16 initial_offset;
|
|
/**
|
|
* @rc_buf_thresh: Thresholds defining each of the buffer ranges
|
|
*/
|
|
u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
|
|
/**
|
|
* @rc_range_params:
|
|
* Parameters for each of the RC ranges defined in
|
|
* &struct drm_dsc_rc_range_parameters
|
|
*/
|
|
struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
|
|
/**
|
|
* @rc_model_size: Total size of RC model
|
|
*/
|
|
u16 rc_model_size;
|
|
/**
|
|
* @flatness_min_qp: Minimum QP where flatness information is sent
|
|
*/
|
|
u8 flatness_min_qp;
|
|
/**
|
|
* @flatness_max_qp: Maximum QP where flatness information is sent
|
|
*/
|
|
u8 flatness_max_qp;
|
|
/**
|
|
* @initial_scale_value: Initial value for the scale factor
|
|
*/
|
|
u8 initial_scale_value;
|
|
/**
|
|
* @scale_decrement_interval:
|
|
* Specifies number of group times between decrementing the scale factor
|
|
* at beginning of a slice.
|
|
*/
|
|
u16 scale_decrement_interval;
|
|
/**
|
|
* @scale_increment_interval:
|
|
* Number of group times between incrementing the scale factor value
|
|
* used at the beginning of a slice.
|
|
*/
|
|
u16 scale_increment_interval;
|
|
/**
|
|
* @nfl_bpg_offset: Non first line BPG offset to be used
|
|
*/
|
|
u16 nfl_bpg_offset;
|
|
/**
|
|
* @slice_bpg_offset: BPG offset used to enforce slice bit
|
|
*/
|
|
u16 slice_bpg_offset;
|
|
/**
|
|
* @final_offset: Final RC linear transformation offset value
|
|
*/
|
|
u16 final_offset;
|
|
/**
|
|
* @vbr_enable: True if VBR mode is enabled, false if disabled
|
|
*/
|
|
bool vbr_enable;
|
|
/**
|
|
* @mux_word_size: Mux word size (in bits) for SSM mode
|
|
*/
|
|
u8 mux_word_size;
|
|
/**
|
|
* @slice_chunk_size:
|
|
* The (max) size in bytes of the "chunks" that are used in slice
|
|
* multiplexing.
|
|
*/
|
|
u16 slice_chunk_size;
|
|
/**
|
|
* @rc_bits: Rate control buffer size in bits
|
|
*/
|
|
u16 rc_bits;
|
|
/**
|
|
* @dsc_version_minor: DSC minor version
|
|
*/
|
|
u8 dsc_version_minor;
|
|
/**
|
|
* @dsc_version_major: DSC major version
|
|
*/
|
|
u8 dsc_version_major;
|
|
/**
|
|
* @native_422: True if Native 4:2:2 supported, else false
|
|
*/
|
|
bool native_422;
|
|
/**
|
|
* @native_420: True if Native 4:2:0 supported else false.
|
|
*/
|
|
bool native_420;
|
|
/**
|
|
* @second_line_bpg_offset:
|
|
* Additional bits/grp for seconnd line of slice for native 4:2:0
|
|
*/
|
|
u8 second_line_bpg_offset;
|
|
/**
|
|
* @nsl_bpg_offset:
|
|
* Num of bits deallocated for each grp that is not in second line of
|
|
* slice
|
|
*/
|
|
u16 nsl_bpg_offset;
|
|
/**
|
|
* @second_line_offset_adj:
|
|
* Offset adjustment for second line in Native 4:2:0 mode
|
|
*/
|
|
u16 second_line_offset_adj;
|
|
};
|
|
|
|
/**
|
|
* struct picture_parameter_set - Represents 128 bytes of Picture Parameter Set
|
|
*
|
|
* The VESA DSC standard defines picture parameter set (PPS) which display
|
|
* stream compression encoders must communicate to decoders.
|
|
* The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in
|
|
* this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
|
|
* The PPS fields that span over more than a byte should be stored in Big Endian
|
|
* format.
|
|
*/
|
|
struct drm_dsc_picture_parameter_set {
|
|
/**
|
|
* @dsc_version:
|
|
* PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
|
|
* PPS0[7:4] - dsc_version_major: Contains major version of DSC
|
|
*/
|
|
u8 dsc_version;
|
|
/**
|
|
* @pps_identifier:
|
|
* PPS1[7:0] - Application specific identifier that can be
|
|
* used to differentiate between different PPS tables.
|
|
*/
|
|
u8 pps_identifier;
|
|
/**
|
|
* @pps_reserved:
|
|
* PPS2[7:0]- RESERVED Byte
|
|
*/
|
|
u8 pps_reserved;
|
|
/**
|
|
* @pps_3:
|
|
* PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
|
|
* generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
|
|
* 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
|
|
* 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
|
|
* PPS3[7:4] - bits_per_component: Bits per component for the original
|
|
* pixels of the encoded picture.
|
|
* 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
|
|
* 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
|
|
* allowed only when dsc_minor_version = 0x2)
|
|
*/
|
|
u8 pps_3;
|
|
/**
|
|
* @pps_4:
|
|
* PPS4[1:0] -These are the most significant 2 bits of
|
|
* compressed BPP bits_per_pixel[9:0] syntax element.
|
|
* PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
|
|
* PPS4[3] - simple_422: Indicates if decoder drops samples to
|
|
* reconstruct the 4:2:2 picture.
|
|
* PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
|
|
* active.
|
|
* PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
|
|
* groups in picture
|
|
* PPS4[7:6] - Reseved bits
|
|
*/
|
|
u8 pps_4;
|
|
/**
|
|
* @bits_per_pixel_low:
|
|
* PPS5[7:0] - This indicates the lower significant 8 bits of
|
|
* the compressed BPP bits_per_pixel[9:0] element.
|
|
*/
|
|
u8 bits_per_pixel_low;
|
|
/**
|
|
* @pic_height:
|
|
* PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
|
|
* within the raster.
|
|
*/
|
|
__be16 pic_height;
|
|
/**
|
|
* @pic_width:
|
|
* PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
|
|
* the raster.
|
|
*/
|
|
__be16 pic_width;
|
|
/**
|
|
* @slice_height:
|
|
* PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
|
|
*/
|
|
__be16 slice_height;
|
|
/**
|
|
* @slice_width:
|
|
* PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
|
|
*/
|
|
__be16 slice_width;
|
|
/**
|
|
* @chunk_size:
|
|
* PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
|
|
* that are used for slice multiplexing.
|
|
*/
|
|
__be16 chunk_size;
|
|
/**
|
|
* @initial_xmit_delay_high:
|
|
* PPS16[1:0] - Most Significant two bits of initial transmission delay.
|
|
* It specifies the number of pixel times that the encoder waits before
|
|
* transmitting data from its rate buffer.
|
|
* PPS16[7:2] - Reserved
|
|
*/
|
|
u8 initial_xmit_delay_high;
|
|
/**
|
|
* @initial_xmit_delay_low:
|
|
* PPS17[7:0] - Least significant 8 bits of initial transmission delay.
|
|
*/
|
|
u8 initial_xmit_delay_low;
|
|
/**
|
|
* @initial_dec_delay:
|
|
*
|
|
* PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
|
|
* of pixel times that the decoder accumulates data in its rate buffer
|
|
* before starting to decode and output pixels.
|
|
*/
|
|
__be16 initial_dec_delay;
|
|
/**
|
|
* @pps20_reserved:
|
|
*
|
|
* PPS20[7:0] - Reserved
|
|
*/
|
|
u8 pps20_reserved;
|
|
/**
|
|
* @initial_scale_value:
|
|
* PPS21[5:0] - Initial rcXformScale factor used at beginning
|
|
* of a slice.
|
|
* PPS21[7:6] - Reserved
|
|
*/
|
|
u8 initial_scale_value;
|
|
/**
|
|
* @scale_increment_interval:
|
|
* PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
|
|
* the rcXformScale factor at end of a slice.
|
|
*/
|
|
__be16 scale_increment_interval;
|
|
/**
|
|
* @scale_decrement_interval_high:
|
|
* PPS24[3:0] - Higher 4 bits indicating number of group times between
|
|
* decrementing the rcXformScale factor at beginning of a slice.
|
|
* PPS24[7:4] - Reserved
|
|
*/
|
|
u8 scale_decrement_interval_high;
|
|
/**
|
|
* @scale_decrement_interval_low:
|
|
* PPS25[7:0] - Lower 8 bits of scale decrement interval
|
|
*/
|
|
u8 scale_decrement_interval_low;
|
|
/**
|
|
* @pps26_reserved:
|
|
* PPS26[7:0]
|
|
*/
|
|
u8 pps26_reserved;
|
|
/**
|
|
* @first_line_bpg_offset:
|
|
* PPS27[4:0] - Number of additional bits that are allocated
|
|
* for each group on first line of a slice.
|
|
* PPS27[7:5] - Reserved
|
|
*/
|
|
u8 first_line_bpg_offset;
|
|
/**
|
|
* @nfl_bpg_offset:
|
|
* PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
|
|
* deallocated for each group for groups after the first line of slice.
|
|
*/
|
|
__be16 nfl_bpg_offset;
|
|
/**
|
|
* @slice_bpg_offset:
|
|
* PPS30, PPS31[7:0] - Number of bits that are deallocated for each
|
|
* group to enforce the slice constraint.
|
|
*/
|
|
__be16 slice_bpg_offset;
|
|
/**
|
|
* @initial_offset:
|
|
* PPS32,33[7:0] - Initial value for rcXformOffset
|
|
*/
|
|
__be16 initial_offset;
|
|
/**
|
|
* @final_offset:
|
|
* PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
|
|
*/
|
|
__be16 final_offset;
|
|
/**
|
|
* @flatness_min_qp:
|
|
* PPS36[4:0] - Minimum QP at which flatness is signaled and
|
|
* flatness QP adjustment is made.
|
|
* PPS36[7:5] - Reserved
|
|
*/
|
|
u8 flatness_min_qp;
|
|
/**
|
|
* @flatness_max_qp:
|
|
* PPS37[4:0] - Max QP at which flatness is signalled and
|
|
* the flatness adjustment is made.
|
|
* PPS37[7:5] - Reserved
|
|
*/
|
|
u8 flatness_max_qp;
|
|
/**
|
|
* @rc_model_size:
|
|
* PPS38,39[7:0] - Number of bits within RC Model.
|
|
*/
|
|
__be16 rc_model_size;
|
|
/**
|
|
* @rc_edge_factor:
|
|
* PPS40[3:0] - Ratio of current activity vs, previous
|
|
* activity to determine presence of edge.
|
|
* PPS40[7:4] - Reserved
|
|
*/
|
|
u8 rc_edge_factor;
|
|
/**
|
|
* @rc_quant_incr_limit0:
|
|
* PPS41[4:0] - QP threshold used in short term RC
|
|
* PPS41[7:5] - Reserved
|
|
*/
|
|
u8 rc_quant_incr_limit0;
|
|
/**
|
|
* @rc_quant_incr_limit1:
|
|
* PPS42[4:0] - QP threshold used in short term RC
|
|
* PPS42[7:5] - Reserved
|
|
*/
|
|
u8 rc_quant_incr_limit1;
|
|
/**
|
|
* @rc_tgt_offset:
|
|
* PPS43[3:0] - Lower end of the variability range around the target
|
|
* bits per group that is allowed by short term RC.
|
|
* PPS43[7:4]- Upper end of the variability range around the target
|
|
* bits per group that i allowed by short term rc.
|
|
*/
|
|
u8 rc_tgt_offset;
|
|
/**
|
|
* @rc_buf_thresh:
|
|
* PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
|
|
* the 15 ranges defined by 14 thresholds.
|
|
*/
|
|
u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
|
|
/**
|
|
* @rc_range_parameters:
|
|
* PPS58[7:0] - PPS87[7:0]
|
|
* Parameters that correspond to each of the 15 ranges.
|
|
*/
|
|
__be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
|
|
/**
|
|
* @native_422_420:
|
|
* PPS88[0] - 0 = Native 4:2:2 not used
|
|
* 1 = Native 4:2:2 used
|
|
* PPS88[1] - 0 = Native 4:2:0 not use
|
|
* 1 = Native 4:2:0 used
|
|
* PPS88[7:2] - Reserved 6 bits
|
|
*/
|
|
u8 native_422_420;
|
|
/**
|
|
* @second_line_bpg_offset:
|
|
* PPS89[4:0] - Additional bits/group budget for the
|
|
* second line of a slice in Native 4:2:0 mode.
|
|
* Set to 0 if DSC minor version is 1 or native420 is 0.
|
|
* PPS89[7:5] - Reserved
|
|
*/
|
|
u8 second_line_bpg_offset;
|
|
/**
|
|
* @nsl_bpg_offset:
|
|
* PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
|
|
* for each group that is not in the second line of a slice.
|
|
*/
|
|
__be16 nsl_bpg_offset;
|
|
/**
|
|
* @second_line_offset_adj:
|
|
* PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
|
|
* line in Native 4:2:0 mode.
|
|
*/
|
|
__be16 second_line_offset_adj;
|
|
/**
|
|
* @pps_long_94_reserved:
|
|
* PPS 94, 95, 96, 97 - Reserved
|
|
*/
|
|
u32 pps_long_94_reserved;
|
|
/**
|
|
* @pps_long_98_reserved:
|
|
* PPS 98, 99, 100, 101 - Reserved
|
|
*/
|
|
u32 pps_long_98_reserved;
|
|
/**
|
|
* @pps_long_102_reserved:
|
|
* PPS 102, 103, 104, 105 - Reserved
|
|
*/
|
|
u32 pps_long_102_reserved;
|
|
/**
|
|
* @pps_long_106_reserved:
|
|
* PPS 106, 107, 108, 109 - reserved
|
|
*/
|
|
u32 pps_long_106_reserved;
|
|
/**
|
|
* @pps_long_110_reserved:
|
|
* PPS 110, 111, 112, 113 - reserved
|
|
*/
|
|
u32 pps_long_110_reserved;
|
|
/**
|
|
* @pps_long_114_reserved:
|
|
* PPS 114 - 117 - reserved
|
|
*/
|
|
u32 pps_long_114_reserved;
|
|
/**
|
|
* @pps_long_118_reserved:
|
|
* PPS 118 - 121 - reserved
|
|
*/
|
|
u32 pps_long_118_reserved;
|
|
/**
|
|
* @pps_long_122_reserved:
|
|
* PPS 122- 125 - reserved
|
|
*/
|
|
u32 pps_long_122_reserved;
|
|
/**
|
|
* @pps_short_126_reserved:
|
|
* PPS 126, 127 - reserved
|
|
*/
|
|
__be16 pps_short_126_reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter
|
|
* Set Metadata
|
|
*
|
|
* This structure represents the DSC PPS infoframe required to send the Picture
|
|
* Parameter Set metadata required before enabling VESA Display Stream
|
|
* Compression. This is based on the DP Secondary Data Packet structure and
|
|
* comprises of SDP Header as defined &struct struct dp_sdp_header in drm_dp_helper.h
|
|
* and PPS payload defined in &struct drm_dsc_picture_parameter_set.
|
|
*
|
|
* @pps_header: Header for PPS as per DP SDP header format of type
|
|
* &struct dp_sdp_header
|
|
* @pps_payload: PPS payload fields as per DSC specification Table 4-1
|
|
* as represented in &struct drm_dsc_picture_parameter_set
|
|
*/
|
|
struct drm_dsc_pps_infoframe {
|
|
struct dp_sdp_header pps_header;
|
|
struct drm_dsc_picture_parameter_set pps_payload;
|
|
} __packed;
|
|
|
|
void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
|
|
void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
|
|
const struct drm_dsc_config *dsc_cfg);
|
|
int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
|
|
|
|
#endif /* _DRM_DSC_H_ */
|