linux/include/asm-x86/bitops.h
Alexander van Heukelum 8450e85399 x86, cleanup: fix description of __fls(): __fls(0) is undefined
Ricardo M. Correia spotted that the use of __fls() in fls64() did
not seem to make sense. In fact fls64()'s implementation is fine,
but the description of __fls() was wrong. Fix that.

Reported-by: "Ricardo M. Correia" <Ricardo.M.Correia@Sun.COM>
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 14:32:38 +02:00

462 lines
11 KiB
C

#ifndef _ASM_X86_BITOPS_H
#define _ASM_X86_BITOPS_H
/*
* Copyright 1992, Linus Torvalds.
*/
#ifndef _LINUX_BITOPS_H
#error only <linux/bitops.h> can be included directly
#endif
#include <linux/compiler.h>
#include <asm/alternative.h>
/*
* These have to be done with inline assembly: that way the bit-setting
* is guaranteed to be atomic. All bit operations return 0 if the bit
* was cleared before the operation and != 0 if it was not.
*
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*/
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
/* Technically wrong, but this avoids compilation errors on some gcc
versions. */
#define BITOP_ADDR(x) "=m" (*(volatile long *) (x))
#else
#define BITOP_ADDR(x) "+m" (*(volatile long *) (x))
#endif
#define ADDR BITOP_ADDR(addr)
/*
* We do the locked ops that don't return the old value as
* a mask operation on a byte.
*/
#define IS_IMMEDIATE(nr) (__builtin_constant_p(nr))
#define CONST_MASK_ADDR(nr, addr) BITOP_ADDR((void *)(addr) + ((nr)>>3))
#define CONST_MASK(nr) (1 << ((nr) & 7))
/**
* set_bit - Atomically set a bit in memory
* @nr: the bit to set
* @addr: the address to start counting from
*
* This function is atomic and may not be reordered. See __set_bit()
* if you do not require the atomic guarantees.
*
* Note: there are no guarantees that this function will not be reordered
* on non x86 architectures, so if you are writing portable code,
* make sure not to rely on its reordering guarantees.
*
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "orb %1,%0"
: CONST_MASK_ADDR(nr, addr)
: "iq" ((u8)CONST_MASK(nr))
: "memory");
} else {
asm volatile(LOCK_PREFIX "bts %1,%0"
: BITOP_ADDR(addr) : "Ir" (nr) : "memory");
}
}
/**
* __set_bit - Set a bit in memory
* @nr: the bit to set
* @addr: the address to start counting from
*
* Unlike set_bit(), this function is non-atomic and may be reordered.
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
static inline void __set_bit(int nr, volatile unsigned long *addr)
{
asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
}
/**
* clear_bit - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
*
* clear_bit() is atomic and may not be reordered. However, it does
* not contain a memory barrier, so if it is used for locking purposes,
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
static inline void clear_bit(int nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "andb %1,%0"
: CONST_MASK_ADDR(nr, addr)
: "iq" ((u8)~CONST_MASK(nr)));
} else {
asm volatile(LOCK_PREFIX "btr %1,%0"
: BITOP_ADDR(addr)
: "Ir" (nr));
}
}
/*
* clear_bit_unlock - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
*
* clear_bit() is atomic and implies release semantics before the memory
* operation. It can be used for an unlock.
*/
static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
{
barrier();
clear_bit(nr, addr);
}
static inline void __clear_bit(int nr, volatile unsigned long *addr)
{
asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
}
/*
* __clear_bit_unlock - Clears a bit in memory
* @nr: Bit to clear
* @addr: Address to start counting from
*
* __clear_bit() is non-atomic and implies release semantics before the memory
* operation. It can be used for an unlock if no other CPUs can concurrently
* modify other bits in the word.
*
* No memory barrier is required here, because x86 cannot reorder stores past
* older loads. Same principle as spin_unlock.
*/
static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
{
barrier();
__clear_bit(nr, addr);
}
#define smp_mb__before_clear_bit() barrier()
#define smp_mb__after_clear_bit() barrier()
/**
* __change_bit - Toggle a bit in memory
* @nr: the bit to change
* @addr: the address to start counting from
*
* Unlike change_bit(), this function is non-atomic and may be reordered.
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
static inline void __change_bit(int nr, volatile unsigned long *addr)
{
asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
}
/**
* change_bit - Toggle a bit in memory
* @nr: Bit to change
* @addr: Address to start counting from
*
* change_bit() is atomic and may not be reordered.
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
static inline void change_bit(int nr, volatile unsigned long *addr)
{
asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr));
}
/**
* test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
"sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
/**
* test_and_set_bit_lock - Set a bit and return its old value for lock
* @nr: Bit to set
* @addr: Address to count from
*
* This is the same as test_and_set_bit on x86.
*/
static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
{
return test_and_set_bit(nr, addr);
}
/**
* __test_and_set_bit - Set a bit and return its old value
* @nr: Bit to set
* @addr: Address to count from
*
* This operation is non-atomic and can be reordered.
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm("bts %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit), ADDR
: "Ir" (nr));
return oldbit;
}
/**
* test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to clear
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
/**
* __test_and_clear_bit - Clear a bit and return its old value
* @nr: Bit to clear
* @addr: Address to count from
*
* This operation is non-atomic and can be reordered.
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm volatile("btr %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit), ADDR
: "Ir" (nr));
return oldbit;
}
/* WARNING: non atomic and it can be reordered! */
static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm volatile("btc %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit), ADDR
: "Ir" (nr) : "memory");
return oldbit;
}
/**
* test_and_change_bit - Change a bit and return its old value
* @nr: Bit to change
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
static inline int constant_test_bit(int nr, const volatile unsigned long *addr)
{
return ((1UL << (nr % BITS_PER_LONG)) &
(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
}
static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
{
int oldbit;
asm volatile("bt %2,%1\n\t"
"sbb %0,%0"
: "=r" (oldbit)
: "m" (*(unsigned long *)addr), "Ir" (nr));
return oldbit;
}
#if 0 /* Fool kernel-doc since it doesn't do macros yet */
/**
* test_bit - Determine whether a bit is set
* @nr: bit number to test
* @addr: Address to start counting from
*/
static int test_bit(int nr, const volatile unsigned long *addr);
#endif
#define test_bit(nr, addr) \
(__builtin_constant_p((nr)) \
? constant_test_bit((nr), (addr)) \
: variable_test_bit((nr), (addr)))
/**
* __ffs - find first set bit in word
* @word: The word to search
*
* Undefined if no bit exists, so code should check against 0 first.
*/
static inline unsigned long __ffs(unsigned long word)
{
asm("bsf %1,%0"
: "=r" (word)
: "rm" (word));
return word;
}
/**
* ffz - find first zero bit in word
* @word: The word to search
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
static inline unsigned long ffz(unsigned long word)
{
asm("bsf %1,%0"
: "=r" (word)
: "r" (~word));
return word;
}
/*
* __fls: find last set bit in word
* @word: The word to search
*
* Undefined if no set bit exists, so code should check against 0 first.
*/
static inline unsigned long __fls(unsigned long word)
{
asm("bsr %1,%0"
: "=r" (word)
: "rm" (word));
return word;
}
#ifdef __KERNEL__
/**
* ffs - find first set bit in word
* @x: the word to search
*
* This is defined the same way as the libc and compiler builtin ffs
* routines, therefore differs in spirit from the other bitops.
*
* ffs(value) returns 0 if value is 0 or the position of the first
* set bit if value is nonzero. The first (least significant) bit
* is at position 1.
*/
static inline int ffs(int x)
{
int r;
#ifdef CONFIG_X86_CMOV
asm("bsfl %1,%0\n\t"
"cmovzl %2,%0"
: "=r" (r) : "rm" (x), "r" (-1));
#else
asm("bsfl %1,%0\n\t"
"jnz 1f\n\t"
"movl $-1,%0\n"
"1:" : "=r" (r) : "rm" (x));
#endif
return r + 1;
}
/**
* fls - find last set bit in word
* @x: the word to search
*
* This is defined in a similar way as the libc and compiler builtin
* ffs, but returns the position of the most significant set bit.
*
* fls(value) returns 0 if value is 0 or the position of the last
* set bit if value is nonzero. The last (most significant) bit is
* at position 32.
*/
static inline int fls(int x)
{
int r;
#ifdef CONFIG_X86_CMOV
asm("bsrl %1,%0\n\t"
"cmovzl %2,%0"
: "=&r" (r) : "rm" (x), "rm" (-1));
#else
asm("bsrl %1,%0\n\t"
"jnz 1f\n\t"
"movl $-1,%0\n"
"1:" : "=r" (r) : "rm" (x));
#endif
return r + 1;
}
#endif /* __KERNEL__ */
#undef ADDR
static inline void set_bit_string(unsigned long *bitmap,
unsigned long i, int len)
{
unsigned long end = i + len;
while (i < end) {
__set_bit(i, bitmap);
i++;
}
}
#ifdef __KERNEL__
#include <asm-generic/bitops/sched.h>
#define ARCH_HAS_FAST_MULTIPLIER 1
#include <asm-generic/bitops/hweight.h>
#endif /* __KERNEL__ */
#include <asm-generic/bitops/fls64.h>
#ifdef __KERNEL__
#include <asm-generic/bitops/ext2-non-atomic.h>
#define ext2_set_bit_atomic(lock, nr, addr) \
test_and_set_bit((nr), (unsigned long *)(addr))
#define ext2_clear_bit_atomic(lock, nr, addr) \
test_and_clear_bit((nr), (unsigned long *)(addr))
#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */
#endif /* _ASM_X86_BITOPS_H */