linux/include/scsi
Mike Christie fff9d40ce0 [SCSI] fc class: unblock target after calling terminate callback (take 2)
When we block a rport and the driver implements the terminate
callback we will fail IO that was running quickly. However
IO that was in the scsi_device/block queue sits there until
the dev_loss_tmo fires, and this can make it look like IO is
lost because new IO will get executed but that IO stuck in
the blocked queue sits there for some time longer.

With this patch when the fast io fail tmo fires, we will
fail the blocked IO and any new IO. This patch also allows
all drivers to partially support the fast io fail tmo. If the
terminate io callback is not implemented, we will still fail blocked
IO and any new IO, so multipath can handle that.

This patch also allows the fc and iscsi classes to implement the
same behavior. The timers are just unfornately named differently.

This patch also fixes the problem where drivers were unblocking
the target in their terminate callback, which was needed for
rport removal, but for fast io fail timeout it would cause
IO to bounce arround the scsi/block layer and the LLD queuecommand.
And it for drivers that could have IO stuck but did not have
a terminate callback the unblock calls in the class will fix
them.

v2.
- fix up bit setting style to meet JamesS's pref.
- Broke out new host byte error changes to make it easier to read.
- added JamesS's ack from list.
v1
- initial patch

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:47 -04:00
..
iscsi_if.h [SCSI] iscsi class: Add session initiatorname and ifacename sysfs attrs. 2008-07-12 08:22:21 -05:00
iscsi_proto.h [SCSI] iscsi_tcp: Enable any size command 2008-07-12 08:22:23 -05:00
libiscsi.h [SCSI] libiscsi, iser, tcp: remove recv_lock 2008-07-12 08:22:22 -05:00
libsas.h include: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:54 -04:00
libsrp.h [SCSI] tgt: convert libsrp and ibmvstgt to use srp_transport 2007-10-12 14:37:57 -04:00
sas_ata.h [SCSI] libsas: fix missing inlines in header file 2008-04-07 12:19:10 -05:00
sas.h [SCSI] libsas: Convert sas_proto users to sas_protocol 2008-01-11 18:22:41 -06:00
scsi_cmnd.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi_dbg.h [SCSI] Fix device not ready printk 2007-10-12 14:51:56 -04:00
scsi_device.h [SCSI] Add helper code so transport classes/driver can control queueing (v3) 2008-10-13 09:28:46 -04:00
scsi_devinfo.h
scsi_dh.h [SCSI] scsi_dh: attach to hardware handler from dm-mpath 2008-07-26 15:14:53 -04:00
scsi_driver.h Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done"" 2008-01-06 10:17:12 -08:00
scsi_eh.h [SCSI] scsi_eh_prep_cmnd should save scmd->underflow 2008-07-26 15:14:56 -04:00
scsi_host.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi_ioctl.h
scsi_netlink_fc.h [SCSI] SCSI & FC transport: extend event vendor id's to 64bits 2006-09-02 15:35:15 -05:00
scsi_netlink.h [SCSI] scsi_netlink: Add transport and LLD recieve and event support 2008-10-03 11:46:13 -05:00
scsi_tcq.h [PATCH] helper function for retrieving scsi_cmd given host based block layer tag 2006-10-04 19:32:09 +02:00
scsi_tgt_if.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_tgt.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_transport_fc.h [SCSI] fc class: unblock target after calling terminate callback (take 2) 2008-10-13 09:28:47 -04:00
scsi_transport_iscsi.h driver core: remove KOBJ_NAME_LEN define 2008-07-21 21:54:52 -07:00
scsi_transport_sas.h SCSI: convert struct class_device to struct device 2008-04-19 19:10:33 -07:00
scsi_transport_spi.h [SCSI] spi transport class: export spi_dv_pending 2007-02-02 20:44:25 -06:00
scsi_transport_srp.h [SCSI] tgt: move tsk_mgmt_response callback to transport class 2007-10-12 14:38:01 -04:00
scsi_transport.h block: unify request timeout handling 2008-10-09 08:56:13 +02:00
scsi.h [SCSI] Add helper code so transport classes/driver can control queueing (v3) 2008-10-13 09:28:46 -04:00
scsicam.h
sg.h [SCSI] sg: Add target reset support 2008-07-12 08:22:32 -05:00
srp.h [SCSI] srp.h: Add I/O Class values 2006-06-17 20:37:38 -07:00