forked from Minki/linux
9a3d7fd275
Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel) The big problem turned out to be a lack of depandancy information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6 42bWGx52bGFvAcpjWy8R =P7hq -----END PGP SIGNATURE----- Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
1010 lines
31 KiB
C
1010 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright 2003-2005 Devicescape Software, Inc.
|
|
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
|
|
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
|
|
* Copyright 2013-2014 Intel Mobile Communications GmbH
|
|
* Copyright(c) 2016 Intel Deutschland GmbH
|
|
* Copyright (C) 2018 - 2019 Intel Corporation
|
|
*/
|
|
|
|
#include <linux/debugfs.h>
|
|
#include <linux/ieee80211.h>
|
|
#include "ieee80211_i.h"
|
|
#include "debugfs.h"
|
|
#include "debugfs_sta.h"
|
|
#include "sta_info.h"
|
|
#include "driver-ops.h"
|
|
|
|
/* sta attributtes */
|
|
|
|
#define STA_READ(name, field, format_string) \
|
|
static ssize_t sta_ ##name## _read(struct file *file, \
|
|
char __user *userbuf, \
|
|
size_t count, loff_t *ppos) \
|
|
{ \
|
|
struct sta_info *sta = file->private_data; \
|
|
return mac80211_format_buffer(userbuf, count, ppos, \
|
|
format_string, sta->field); \
|
|
}
|
|
#define STA_READ_D(name, field) STA_READ(name, field, "%d\n")
|
|
|
|
#define STA_OPS(name) \
|
|
static const struct file_operations sta_ ##name## _ops = { \
|
|
.read = sta_##name##_read, \
|
|
.open = simple_open, \
|
|
.llseek = generic_file_llseek, \
|
|
}
|
|
|
|
#define STA_OPS_RW(name) \
|
|
static const struct file_operations sta_ ##name## _ops = { \
|
|
.read = sta_##name##_read, \
|
|
.write = sta_##name##_write, \
|
|
.open = simple_open, \
|
|
.llseek = generic_file_llseek, \
|
|
}
|
|
|
|
#define STA_FILE(name, field, format) \
|
|
STA_READ_##format(name, field) \
|
|
STA_OPS(name)
|
|
|
|
STA_FILE(aid, sta.aid, D);
|
|
|
|
static const char * const sta_flag_names[] = {
|
|
#define FLAG(F) [WLAN_STA_##F] = #F
|
|
FLAG(AUTH),
|
|
FLAG(ASSOC),
|
|
FLAG(PS_STA),
|
|
FLAG(AUTHORIZED),
|
|
FLAG(SHORT_PREAMBLE),
|
|
FLAG(WDS),
|
|
FLAG(CLEAR_PS_FILT),
|
|
FLAG(MFP),
|
|
FLAG(BLOCK_BA),
|
|
FLAG(PS_DRIVER),
|
|
FLAG(PSPOLL),
|
|
FLAG(TDLS_PEER),
|
|
FLAG(TDLS_PEER_AUTH),
|
|
FLAG(TDLS_INITIATOR),
|
|
FLAG(TDLS_CHAN_SWITCH),
|
|
FLAG(TDLS_OFF_CHANNEL),
|
|
FLAG(TDLS_WIDER_BW),
|
|
FLAG(UAPSD),
|
|
FLAG(SP),
|
|
FLAG(4ADDR_EVENT),
|
|
FLAG(INSERTED),
|
|
FLAG(RATE_CONTROL),
|
|
FLAG(TOFFSET_KNOWN),
|
|
FLAG(MPSP_OWNER),
|
|
FLAG(MPSP_RECIPIENT),
|
|
FLAG(PS_DELIVER),
|
|
#undef FLAG
|
|
};
|
|
|
|
static ssize_t sta_flags_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char buf[16 * NUM_WLAN_STA_FLAGS], *pos = buf;
|
|
char *end = buf + sizeof(buf) - 1;
|
|
struct sta_info *sta = file->private_data;
|
|
unsigned int flg;
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(sta_flag_names) != NUM_WLAN_STA_FLAGS);
|
|
|
|
for (flg = 0; flg < NUM_WLAN_STA_FLAGS; flg++) {
|
|
if (test_sta_flag(sta, flg))
|
|
pos += scnprintf(pos, end - pos, "%s\n",
|
|
sta_flag_names[flg]);
|
|
}
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
|
|
}
|
|
STA_OPS(flags);
|
|
|
|
static ssize_t sta_num_ps_buf_frames_read(struct file *file,
|
|
char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sta_info *sta = file->private_data;
|
|
char buf[17*IEEE80211_NUM_ACS], *p = buf;
|
|
int ac;
|
|
|
|
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "AC%d: %d\n", ac,
|
|
skb_queue_len(&sta->ps_tx_buf[ac]) +
|
|
skb_queue_len(&sta->tx_filtered[ac]));
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
}
|
|
STA_OPS(num_ps_buf_frames);
|
|
|
|
static ssize_t sta_last_seq_ctrl_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char buf[15*IEEE80211_NUM_TIDS], *p = buf;
|
|
int i;
|
|
struct sta_info *sta = file->private_data;
|
|
for (i = 0; i < IEEE80211_NUM_TIDS; i++)
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "%x ",
|
|
le16_to_cpu(sta->last_seq_ctrl[i]));
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "\n");
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
}
|
|
STA_OPS(last_seq_ctrl);
|
|
|
|
#define AQM_TXQ_ENTRY_LEN 130
|
|
|
|
static ssize_t sta_aqm_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_local *local = sta->local;
|
|
size_t bufsz = AQM_TXQ_ENTRY_LEN * (IEEE80211_NUM_TIDS + 2);
|
|
char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf;
|
|
struct txq_info *txqi;
|
|
ssize_t rv;
|
|
int i;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_bh(&local->fq.lock);
|
|
rcu_read_lock();
|
|
|
|
p += scnprintf(p,
|
|
bufsz+buf-p,
|
|
"target %uus interval %uus ecn %s\n",
|
|
codel_time_to_us(sta->cparams.target),
|
|
codel_time_to_us(sta->cparams.interval),
|
|
sta->cparams.ecn ? "yes" : "no");
|
|
p += scnprintf(p,
|
|
bufsz+buf-p,
|
|
"tid ac backlog-bytes backlog-packets new-flows drops marks overlimit collisions tx-bytes tx-packets flags\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
|
|
if (!sta->sta.txq[i])
|
|
continue;
|
|
txqi = to_txq_info(sta->sta.txq[i]);
|
|
p += scnprintf(p, bufsz+buf-p,
|
|
"%d %d %u %u %u %u %u %u %u %u %u 0x%lx(%s%s%s)\n",
|
|
txqi->txq.tid,
|
|
txqi->txq.ac,
|
|
txqi->tin.backlog_bytes,
|
|
txqi->tin.backlog_packets,
|
|
txqi->tin.flows,
|
|
txqi->cstats.drop_count,
|
|
txqi->cstats.ecn_mark,
|
|
txqi->tin.overlimit,
|
|
txqi->tin.collisions,
|
|
txqi->tin.tx_bytes,
|
|
txqi->tin.tx_packets,
|
|
txqi->flags,
|
|
test_bit(IEEE80211_TXQ_STOP, &txqi->flags) ? "STOP" : "RUN",
|
|
test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags) ? " AMPDU" : "",
|
|
test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags) ? " NO-AMSDU" : "");
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
spin_unlock_bh(&local->fq.lock);
|
|
|
|
rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
kfree(buf);
|
|
return rv;
|
|
}
|
|
STA_OPS(aqm);
|
|
|
|
static ssize_t sta_airtime_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_local *local = sta->sdata->local;
|
|
size_t bufsz = 400;
|
|
char *buf = kzalloc(bufsz, GFP_KERNEL), *p = buf;
|
|
u64 rx_airtime = 0, tx_airtime = 0;
|
|
s64 deficit[IEEE80211_NUM_ACS];
|
|
u32 q_depth[IEEE80211_NUM_ACS];
|
|
u32 q_limit_l[IEEE80211_NUM_ACS], q_limit_h[IEEE80211_NUM_ACS];
|
|
ssize_t rv;
|
|
int ac;
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
|
|
spin_lock_bh(&local->active_txq_lock[ac]);
|
|
rx_airtime += sta->airtime[ac].rx_airtime;
|
|
tx_airtime += sta->airtime[ac].tx_airtime;
|
|
deficit[ac] = sta->airtime[ac].deficit;
|
|
q_limit_l[ac] = sta->airtime[ac].aql_limit_low;
|
|
q_limit_h[ac] = sta->airtime[ac].aql_limit_high;
|
|
spin_unlock_bh(&local->active_txq_lock[ac]);
|
|
q_depth[ac] = atomic_read(&sta->airtime[ac].aql_tx_pending);
|
|
}
|
|
|
|
p += scnprintf(p, bufsz + buf - p,
|
|
"RX: %llu us\nTX: %llu us\nWeight: %u\n"
|
|
"Deficit: VO: %lld us VI: %lld us BE: %lld us BK: %lld us\n"
|
|
"Q depth: VO: %u us VI: %u us BE: %u us BK: %u us\n"
|
|
"Q limit[low/high]: VO: %u/%u VI: %u/%u BE: %u/%u BK: %u/%u\n",
|
|
rx_airtime, tx_airtime, sta->airtime_weight,
|
|
deficit[0], deficit[1], deficit[2], deficit[3],
|
|
q_depth[0], q_depth[1], q_depth[2], q_depth[3],
|
|
q_limit_l[0], q_limit_h[0], q_limit_l[1], q_limit_h[1],
|
|
q_limit_l[2], q_limit_h[2], q_limit_l[3], q_limit_h[3]),
|
|
|
|
rv = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
kfree(buf);
|
|
return rv;
|
|
}
|
|
|
|
static ssize_t sta_airtime_write(struct file *file, const char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_local *local = sta->sdata->local;
|
|
u32 ac, q_limit_l, q_limit_h;
|
|
char _buf[100] = {}, *buf = _buf;
|
|
|
|
if (count > sizeof(_buf))
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(buf, userbuf, count))
|
|
return -EFAULT;
|
|
|
|
buf[sizeof(_buf) - 1] = '\0';
|
|
if (sscanf(buf, "queue limit %u %u %u", &ac, &q_limit_l, &q_limit_h)
|
|
!= 3)
|
|
return -EINVAL;
|
|
|
|
if (ac >= IEEE80211_NUM_ACS)
|
|
return -EINVAL;
|
|
|
|
sta->airtime[ac].aql_limit_low = q_limit_l;
|
|
sta->airtime[ac].aql_limit_high = q_limit_h;
|
|
|
|
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
|
|
spin_lock_bh(&local->active_txq_lock[ac]);
|
|
sta->airtime[ac].rx_airtime = 0;
|
|
sta->airtime[ac].tx_airtime = 0;
|
|
sta->airtime[ac].deficit = sta->airtime_weight;
|
|
spin_unlock_bh(&local->active_txq_lock[ac]);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
STA_OPS_RW(airtime);
|
|
|
|
static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char buf[71 + IEEE80211_NUM_TIDS * 40], *p = buf;
|
|
int i;
|
|
struct sta_info *sta = file->private_data;
|
|
struct tid_ampdu_rx *tid_rx;
|
|
struct tid_ampdu_tx *tid_tx;
|
|
|
|
rcu_read_lock();
|
|
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "next dialog_token: %#02x\n",
|
|
sta->ampdu_mlme.dialog_token_allocator + 1);
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"TID\t\tRX\tDTKN\tSSN\t\tTX\tDTKN\tpending\n");
|
|
|
|
for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
|
|
bool tid_rx_valid;
|
|
|
|
tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]);
|
|
tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[i]);
|
|
tid_rx_valid = test_bit(i, sta->ampdu_mlme.agg_session_valid);
|
|
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "%02d", i);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x",
|
|
tid_rx_valid);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
|
|
tid_rx_valid ?
|
|
sta->ampdu_mlme.tid_rx_token[i] : 0);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.3x",
|
|
tid_rx ? tid_rx->ssn : 0);
|
|
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x", !!tid_tx);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
|
|
tid_tx ? tid_tx->dialog_token : 0);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\t%03d",
|
|
tid_tx ? skb_queue_len(&tid_tx->pending) : 0);
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "\n");
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
}
|
|
|
|
static ssize_t sta_agg_status_write(struct file *file, const char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char _buf[25] = {}, *buf = _buf;
|
|
struct sta_info *sta = file->private_data;
|
|
bool start, tx;
|
|
unsigned long tid;
|
|
char *pos;
|
|
int ret, timeout = 5000;
|
|
|
|
if (count > sizeof(_buf))
|
|
return -EINVAL;
|
|
|
|
if (copy_from_user(buf, userbuf, count))
|
|
return -EFAULT;
|
|
|
|
buf[sizeof(_buf) - 1] = '\0';
|
|
pos = buf;
|
|
buf = strsep(&pos, " ");
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
if (!strcmp(buf, "tx"))
|
|
tx = true;
|
|
else if (!strcmp(buf, "rx"))
|
|
tx = false;
|
|
else
|
|
return -EINVAL;
|
|
|
|
buf = strsep(&pos, " ");
|
|
if (!buf)
|
|
return -EINVAL;
|
|
if (!strcmp(buf, "start")) {
|
|
start = true;
|
|
if (!tx)
|
|
return -EINVAL;
|
|
} else if (!strcmp(buf, "stop")) {
|
|
start = false;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
buf = strsep(&pos, " ");
|
|
if (!buf)
|
|
return -EINVAL;
|
|
if (sscanf(buf, "timeout=%d", &timeout) == 1) {
|
|
buf = strsep(&pos, " ");
|
|
if (!buf || !tx || !start)
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = kstrtoul(buf, 0, &tid);
|
|
if (ret || tid >= IEEE80211_NUM_TIDS)
|
|
return -EINVAL;
|
|
|
|
if (tx) {
|
|
if (start)
|
|
ret = ieee80211_start_tx_ba_session(&sta->sta, tid,
|
|
timeout);
|
|
else
|
|
ret = ieee80211_stop_tx_ba_session(&sta->sta, tid);
|
|
} else {
|
|
__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_RECIPIENT,
|
|
3, true);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret ?: count;
|
|
}
|
|
STA_OPS_RW(agg_status);
|
|
|
|
static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
#define PRINT_HT_CAP(_cond, _str) \
|
|
do { \
|
|
if (_cond) \
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "\t" _str "\n"); \
|
|
} while (0)
|
|
char buf[512], *p = buf;
|
|
int i;
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_sta_ht_cap *htc = &sta->sta.ht_cap;
|
|
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "ht %ssupported\n",
|
|
htc->ht_supported ? "" : "not ");
|
|
if (htc->ht_supported) {
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "cap: %#.4x\n", htc->cap);
|
|
|
|
PRINT_HT_CAP((htc->cap & BIT(0)), "RX LDPC");
|
|
PRINT_HT_CAP((htc->cap & BIT(1)), "HT20/HT40");
|
|
PRINT_HT_CAP(!(htc->cap & BIT(1)), "HT20");
|
|
|
|
PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 0, "Static SM Power Save");
|
|
PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 1, "Dynamic SM Power Save");
|
|
PRINT_HT_CAP(((htc->cap >> 2) & 0x3) == 3, "SM Power Save disabled");
|
|
|
|
PRINT_HT_CAP((htc->cap & BIT(4)), "RX Greenfield");
|
|
PRINT_HT_CAP((htc->cap & BIT(5)), "RX HT20 SGI");
|
|
PRINT_HT_CAP((htc->cap & BIT(6)), "RX HT40 SGI");
|
|
PRINT_HT_CAP((htc->cap & BIT(7)), "TX STBC");
|
|
|
|
PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 0, "No RX STBC");
|
|
PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 1, "RX STBC 1-stream");
|
|
PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 2, "RX STBC 2-streams");
|
|
PRINT_HT_CAP(((htc->cap >> 8) & 0x3) == 3, "RX STBC 3-streams");
|
|
|
|
PRINT_HT_CAP((htc->cap & BIT(10)), "HT Delayed Block Ack");
|
|
|
|
PRINT_HT_CAP(!(htc->cap & BIT(11)), "Max AMSDU length: "
|
|
"3839 bytes");
|
|
PRINT_HT_CAP((htc->cap & BIT(11)), "Max AMSDU length: "
|
|
"7935 bytes");
|
|
|
|
/*
|
|
* For beacons and probe response this would mean the BSS
|
|
* does or does not allow the usage of DSSS/CCK HT40.
|
|
* Otherwise it means the STA does or does not use
|
|
* DSSS/CCK HT40.
|
|
*/
|
|
PRINT_HT_CAP((htc->cap & BIT(12)), "DSSS/CCK HT40");
|
|
PRINT_HT_CAP(!(htc->cap & BIT(12)), "No DSSS/CCK HT40");
|
|
|
|
/* BIT(13) is reserved */
|
|
|
|
PRINT_HT_CAP((htc->cap & BIT(14)), "40 MHz Intolerant");
|
|
|
|
PRINT_HT_CAP((htc->cap & BIT(15)), "L-SIG TXOP protection");
|
|
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "ampdu factor/density: %d/%d\n",
|
|
htc->ampdu_factor, htc->ampdu_density);
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "MCS mask:");
|
|
|
|
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
|
|
p += scnprintf(p, sizeof(buf)+buf-p, " %.2x",
|
|
htc->mcs.rx_mask[i]);
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "\n");
|
|
|
|
/* If not set this is meaningless */
|
|
if (le16_to_cpu(htc->mcs.rx_highest)) {
|
|
p += scnprintf(p, sizeof(buf)+buf-p,
|
|
"MCS rx highest: %d Mbps\n",
|
|
le16_to_cpu(htc->mcs.rx_highest));
|
|
}
|
|
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "MCS tx params: %x\n",
|
|
htc->mcs.tx_params);
|
|
}
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
}
|
|
STA_OPS(ht_capa);
|
|
|
|
static ssize_t sta_vht_capa_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char buf[512], *p = buf;
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_sta_vht_cap *vhtc = &sta->sta.vht_cap;
|
|
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "VHT %ssupported\n",
|
|
vhtc->vht_supported ? "" : "not ");
|
|
if (vhtc->vht_supported) {
|
|
p += scnprintf(p, sizeof(buf) + buf - p, "cap: %#.8x\n",
|
|
vhtc->cap);
|
|
#define PFLAG(a, b) \
|
|
do { \
|
|
if (vhtc->cap & IEEE80211_VHT_CAP_ ## a) \
|
|
p += scnprintf(p, sizeof(buf) + buf - p, \
|
|
"\t\t%s\n", b); \
|
|
} while (0)
|
|
|
|
switch (vhtc->cap & 0x3) {
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tMAX-MPDU-3895\n");
|
|
break;
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tMAX-MPDU-7991\n");
|
|
break;
|
|
case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tMAX-MPDU-11454\n");
|
|
break;
|
|
default:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tMAX-MPDU-UNKNOWN\n");
|
|
}
|
|
switch (vhtc->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
|
|
case 0:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\t80Mhz\n");
|
|
break;
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\t160Mhz\n");
|
|
break;
|
|
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\t80+80Mhz\n");
|
|
break;
|
|
default:
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tUNKNOWN-MHZ: 0x%x\n",
|
|
(vhtc->cap >> 2) & 0x3);
|
|
}
|
|
PFLAG(RXLDPC, "RXLDPC");
|
|
PFLAG(SHORT_GI_80, "SHORT-GI-80");
|
|
PFLAG(SHORT_GI_160, "SHORT-GI-160");
|
|
PFLAG(TXSTBC, "TXSTBC");
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tRXSTBC_%d\n", (vhtc->cap >> 8) & 0x7);
|
|
PFLAG(SU_BEAMFORMER_CAPABLE, "SU-BEAMFORMER-CAPABLE");
|
|
PFLAG(SU_BEAMFORMEE_CAPABLE, "SU-BEAMFORMEE-CAPABLE");
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tBEAMFORMEE-STS: 0x%x\n",
|
|
(vhtc->cap & IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK) >>
|
|
IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tSOUNDING-DIMENSIONS: 0x%x\n",
|
|
(vhtc->cap & IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK)
|
|
>> IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT);
|
|
PFLAG(MU_BEAMFORMER_CAPABLE, "MU-BEAMFORMER-CAPABLE");
|
|
PFLAG(MU_BEAMFORMEE_CAPABLE, "MU-BEAMFORMEE-CAPABLE");
|
|
PFLAG(VHT_TXOP_PS, "TXOP-PS");
|
|
PFLAG(HTC_VHT, "HTC-VHT");
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tMPDU-LENGTH-EXPONENT: 0x%x\n",
|
|
(vhtc->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
|
|
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT);
|
|
PFLAG(VHT_LINK_ADAPTATION_VHT_UNSOL_MFB,
|
|
"LINK-ADAPTATION-VHT-UNSOL-MFB");
|
|
p += scnprintf(p, sizeof(buf) + buf - p,
|
|
"\t\tLINK-ADAPTATION-VHT-MRQ-MFB: 0x%x\n",
|
|
(vhtc->cap & IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB) >> 26);
|
|
PFLAG(RX_ANTENNA_PATTERN, "RX-ANTENNA-PATTERN");
|
|
PFLAG(TX_ANTENNA_PATTERN, "TX-ANTENNA-PATTERN");
|
|
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "RX MCS: %.4x\n",
|
|
le16_to_cpu(vhtc->vht_mcs.rx_mcs_map));
|
|
if (vhtc->vht_mcs.rx_highest)
|
|
p += scnprintf(p, sizeof(buf)+buf-p,
|
|
"MCS RX highest: %d Mbps\n",
|
|
le16_to_cpu(vhtc->vht_mcs.rx_highest));
|
|
p += scnprintf(p, sizeof(buf)+buf-p, "TX MCS: %.4x\n",
|
|
le16_to_cpu(vhtc->vht_mcs.tx_mcs_map));
|
|
if (vhtc->vht_mcs.tx_highest)
|
|
p += scnprintf(p, sizeof(buf)+buf-p,
|
|
"MCS TX highest: %d Mbps\n",
|
|
le16_to_cpu(vhtc->vht_mcs.tx_highest));
|
|
#undef PFLAG
|
|
}
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
}
|
|
STA_OPS(vht_capa);
|
|
|
|
static ssize_t sta_he_capa_read(struct file *file, char __user *userbuf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
char *buf, *p;
|
|
size_t buf_sz = PAGE_SIZE;
|
|
struct sta_info *sta = file->private_data;
|
|
struct ieee80211_sta_he_cap *hec = &sta->sta.he_cap;
|
|
struct ieee80211_he_mcs_nss_supp *nss = &hec->he_mcs_nss_supp;
|
|
u8 ppe_size;
|
|
u8 *cap;
|
|
int i;
|
|
ssize_t ret;
|
|
|
|
buf = kmalloc(buf_sz, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
p = buf;
|
|
|
|
p += scnprintf(p, buf_sz + buf - p, "HE %ssupported\n",
|
|
hec->has_he ? "" : "not ");
|
|
if (!hec->has_he)
|
|
goto out;
|
|
|
|
cap = hec->he_cap_elem.mac_cap_info;
|
|
p += scnprintf(p, buf_sz + buf - p,
|
|
"MAC-CAP: %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x\n",
|
|
cap[0], cap[1], cap[2], cap[3], cap[4], cap[5]);
|
|
|
|
#define PRINT(fmt, ...) \
|
|
p += scnprintf(p, buf_sz + buf - p, "\t\t" fmt "\n", \
|
|
##__VA_ARGS__)
|
|
|
|
#define PFLAG(t, n, a, b) \
|
|
do { \
|
|
if (cap[n] & IEEE80211_HE_##t##_CAP##n##_##a) \
|
|
PRINT("%s", b); \
|
|
} while (0)
|
|
|
|
#define PFLAG_RANGE(t, i, n, s, m, off, fmt) \
|
|
do { \
|
|
u8 msk = IEEE80211_HE_##t##_CAP##i##_##n##_MASK; \
|
|
u8 idx = ((cap[i] & msk) >> (ffs(msk) - 1)) + off; \
|
|
PRINT(fmt, (s << idx) + (m * idx)); \
|
|
} while (0)
|
|
|
|
#define PFLAG_RANGE_DEFAULT(t, i, n, s, m, off, fmt, a, b) \
|
|
do { \
|
|
if (cap[i] == IEEE80211_HE_##t ##_CAP##i##_##n##_##a) { \
|
|
PRINT("%s", b); \
|
|
break; \
|
|
} \
|
|
PFLAG_RANGE(t, i, n, s, m, off, fmt); \
|
|
} while (0)
|
|
|
|
PFLAG(MAC, 0, HTC_HE, "HTC-HE");
|
|
PFLAG(MAC, 0, TWT_REQ, "TWT-REQ");
|
|
PFLAG(MAC, 0, TWT_RES, "TWT-RES");
|
|
PFLAG_RANGE_DEFAULT(MAC, 0, DYNAMIC_FRAG, 0, 1, 0,
|
|
"DYNAMIC-FRAG-LEVEL-%d", NOT_SUPP, "NOT-SUPP");
|
|
PFLAG_RANGE_DEFAULT(MAC, 0, MAX_NUM_FRAG_MSDU, 1, 0, 0,
|
|
"MAX-NUM-FRAG-MSDU-%d", UNLIMITED, "UNLIMITED");
|
|
|
|
PFLAG_RANGE_DEFAULT(MAC, 1, MIN_FRAG_SIZE, 128, 0, -1,
|
|
"MIN-FRAG-SIZE-%d", UNLIMITED, "UNLIMITED");
|
|
PFLAG_RANGE_DEFAULT(MAC, 1, TF_MAC_PAD_DUR, 0, 8, 0,
|
|
"TF-MAC-PAD-DUR-%dUS", MASK, "UNKNOWN");
|
|
PFLAG_RANGE(MAC, 1, MULTI_TID_AGG_RX_QOS, 0, 1, 1,
|
|
"MULTI-TID-AGG-RX-QOS-%d");
|
|
|
|
if (cap[0] & IEEE80211_HE_MAC_CAP0_HTC_HE) {
|
|
switch (((cap[2] << 1) | (cap[1] >> 7)) & 0x3) {
|
|
case 0:
|
|
PRINT("LINK-ADAPTATION-NO-FEEDBACK");
|
|
break;
|
|
case 1:
|
|
PRINT("LINK-ADAPTATION-RESERVED");
|
|
break;
|
|
case 2:
|
|
PRINT("LINK-ADAPTATION-UNSOLICITED-FEEDBACK");
|
|
break;
|
|
case 3:
|
|
PRINT("LINK-ADAPTATION-BOTH");
|
|
break;
|
|
}
|
|
}
|
|
|
|
PFLAG(MAC, 2, ALL_ACK, "ALL-ACK");
|
|
PFLAG(MAC, 2, TRS, "TRS");
|
|
PFLAG(MAC, 2, BSR, "BSR");
|
|
PFLAG(MAC, 2, BCAST_TWT, "BCAST-TWT");
|
|
PFLAG(MAC, 2, 32BIT_BA_BITMAP, "32BIT-BA-BITMAP");
|
|
PFLAG(MAC, 2, MU_CASCADING, "MU-CASCADING");
|
|
PFLAG(MAC, 2, ACK_EN, "ACK-EN");
|
|
|
|
PFLAG(MAC, 3, OMI_CONTROL, "OMI-CONTROL");
|
|
PFLAG(MAC, 3, OFDMA_RA, "OFDMA-RA");
|
|
|
|
switch (cap[3] & IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) {
|
|
case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_USE_VHT:
|
|
PRINT("MAX-AMPDU-LEN-EXP-USE-VHT");
|
|
break;
|
|
case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_1:
|
|
PRINT("MAX-AMPDU-LEN-EXP-VHT-1");
|
|
break;
|
|
case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2:
|
|
PRINT("MAX-AMPDU-LEN-EXP-VHT-2");
|
|
break;
|
|
case IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_RESERVED:
|
|
PRINT("MAX-AMPDU-LEN-EXP-RESERVED");
|
|
break;
|
|
}
|
|
|
|
PFLAG(MAC, 3, AMSDU_FRAG, "AMSDU-FRAG");
|
|
PFLAG(MAC, 3, FLEX_TWT_SCHED, "FLEX-TWT-SCHED");
|
|
PFLAG(MAC, 3, RX_CTRL_FRAME_TO_MULTIBSS, "RX-CTRL-FRAME-TO-MULTIBSS");
|
|
|
|
PFLAG(MAC, 4, BSRP_BQRP_A_MPDU_AGG, "BSRP-BQRP-A-MPDU-AGG");
|
|
PFLAG(MAC, 4, QTP, "QTP");
|
|
PFLAG(MAC, 4, BQR, "BQR");
|
|
PFLAG(MAC, 4, SRP_RESP, "SRP-RESP");
|
|
PFLAG(MAC, 4, NDP_FB_REP, "NDP-FB-REP");
|
|
PFLAG(MAC, 4, OPS, "OPS");
|
|
PFLAG(MAC, 4, AMDSU_IN_AMPDU, "AMSDU-IN-AMPDU");
|
|
|
|
PRINT("MULTI-TID-AGG-TX-QOS-%d", ((cap[5] << 1) | (cap[4] >> 7)) & 0x7);
|
|
|
|
PFLAG(MAC, 5, SUBCHAN_SELECVITE_TRANSMISSION,
|
|
"SUBCHAN-SELECVITE-TRANSMISSION");
|
|
PFLAG(MAC, 5, UL_2x996_TONE_RU, "UL-2x996-TONE-RU");
|
|
PFLAG(MAC, 5, OM_CTRL_UL_MU_DATA_DIS_RX, "OM-CTRL-UL-MU-DATA-DIS-RX");
|
|
PFLAG(MAC, 5, HE_DYNAMIC_SM_PS, "HE-DYNAMIC-SM-PS");
|
|
PFLAG(MAC, 5, PUNCTURED_SOUNDING, "PUNCTURED-SOUNDING");
|
|
PFLAG(MAC, 5, HT_VHT_TRIG_FRAME_RX, "HT-VHT-TRIG-FRAME-RX");
|
|
|
|
cap = hec->he_cap_elem.phy_cap_info;
|
|
p += scnprintf(p, buf_sz + buf - p,
|
|
"PHY CAP: %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x %#.2x\n",
|
|
cap[0], cap[1], cap[2], cap[3], cap[4], cap[5], cap[6],
|
|
cap[7], cap[8], cap[9], cap[10]);
|
|
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_40MHZ_IN_2G,
|
|
"CHANNEL-WIDTH-SET-40MHZ-IN-2G");
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G,
|
|
"CHANNEL-WIDTH-SET-40MHZ-80MHZ-IN-5G");
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_160MHZ_IN_5G,
|
|
"CHANNEL-WIDTH-SET-160MHZ-IN-5G");
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
|
|
"CHANNEL-WIDTH-SET-80PLUS80-MHZ-IN-5G");
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G,
|
|
"CHANNEL-WIDTH-SET-RU-MAPPING-IN-2G");
|
|
PFLAG(PHY, 0, CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G,
|
|
"CHANNEL-WIDTH-SET-RU-MAPPING-IN-5G");
|
|
|
|
switch (cap[1] & IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK) {
|
|
case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ:
|
|
PRINT("PREAMBLE-PUNC-RX-80MHZ-ONLY-SECOND-20MHZ");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ:
|
|
PRINT("PREAMBLE-PUNC-RX-80MHZ-ONLY-SECOND-40MHZ");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ:
|
|
PRINT("PREAMBLE-PUNC-RX-160MHZ-ONLY-SECOND-20MHZ");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ:
|
|
PRINT("PREAMBLE-PUNC-RX-160MHZ-ONLY-SECOND-40MHZ");
|
|
break;
|
|
}
|
|
|
|
PFLAG(PHY, 1, DEVICE_CLASS_A,
|
|
"IEEE80211-HE-PHY-CAP1-DEVICE-CLASS-A");
|
|
PFLAG(PHY, 1, LDPC_CODING_IN_PAYLOAD,
|
|
"LDPC-CODING-IN-PAYLOAD");
|
|
PFLAG(PHY, 1, HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US,
|
|
"HY-CAP1-HE-LTF-AND-GI-FOR-HE-PPDUS-0-8US");
|
|
PRINT("MIDAMBLE-RX-MAX-NSTS-%d", ((cap[2] << 1) | (cap[1] >> 7)) & 0x3);
|
|
|
|
PFLAG(PHY, 2, NDP_4x_LTF_AND_3_2US, "NDP-4X-LTF-AND-3-2US");
|
|
PFLAG(PHY, 2, STBC_TX_UNDER_80MHZ, "STBC-TX-UNDER-80MHZ");
|
|
PFLAG(PHY, 2, STBC_RX_UNDER_80MHZ, "STBC-RX-UNDER-80MHZ");
|
|
PFLAG(PHY, 2, DOPPLER_TX, "DOPPLER-TX");
|
|
PFLAG(PHY, 2, DOPPLER_RX, "DOPPLER-RX");
|
|
PFLAG(PHY, 2, UL_MU_FULL_MU_MIMO, "UL-MU-FULL-MU-MIMO");
|
|
PFLAG(PHY, 2, UL_MU_PARTIAL_MU_MIMO, "UL-MU-PARTIAL-MU-MIMO");
|
|
|
|
switch (cap[3] & IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK) {
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM:
|
|
PRINT("DCM-MAX-CONST-TX-NO-DCM");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK:
|
|
PRINT("DCM-MAX-CONST-TX-BPSK");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK:
|
|
PRINT("DCM-MAX-CONST-TX-QPSK");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM:
|
|
PRINT("DCM-MAX-CONST-TX-16-QAM");
|
|
break;
|
|
}
|
|
|
|
PFLAG(PHY, 3, DCM_MAX_TX_NSS_1, "DCM-MAX-TX-NSS-1");
|
|
PFLAG(PHY, 3, DCM_MAX_TX_NSS_2, "DCM-MAX-TX-NSS-2");
|
|
|
|
switch (cap[3] & IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK) {
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM:
|
|
PRINT("DCM-MAX-CONST-RX-NO-DCM");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK:
|
|
PRINT("DCM-MAX-CONST-RX-BPSK");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK:
|
|
PRINT("DCM-MAX-CONST-RX-QPSK");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM:
|
|
PRINT("DCM-MAX-CONST-RX-16-QAM");
|
|
break;
|
|
}
|
|
|
|
PFLAG(PHY, 3, DCM_MAX_RX_NSS_1, "DCM-MAX-RX-NSS-1");
|
|
PFLAG(PHY, 3, DCM_MAX_RX_NSS_2, "DCM-MAX-RX-NSS-2");
|
|
PFLAG(PHY, 3, RX_HE_MU_PPDU_FROM_NON_AP_STA,
|
|
"RX-HE-MU-PPDU-FROM-NON-AP-STA");
|
|
PFLAG(PHY, 3, SU_BEAMFORMER, "SU-BEAMFORMER");
|
|
|
|
PFLAG(PHY, 4, SU_BEAMFORMEE, "SU-BEAMFORMEE");
|
|
PFLAG(PHY, 4, MU_BEAMFORMER, "MU-BEAMFORMER");
|
|
|
|
PFLAG_RANGE(PHY, 4, BEAMFORMEE_MAX_STS_UNDER_80MHZ, 0, 1, 4,
|
|
"BEAMFORMEE-MAX-STS-UNDER-%d");
|
|
PFLAG_RANGE(PHY, 4, BEAMFORMEE_MAX_STS_ABOVE_80MHZ, 0, 1, 4,
|
|
"BEAMFORMEE-MAX-STS-ABOVE-%d");
|
|
|
|
PFLAG_RANGE(PHY, 5, BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ, 0, 1, 1,
|
|
"NUM-SND-DIM-UNDER-80MHZ-%d");
|
|
PFLAG_RANGE(PHY, 5, BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ, 0, 1, 1,
|
|
"NUM-SND-DIM-ABOVE-80MHZ-%d");
|
|
PFLAG(PHY, 5, NG16_SU_FEEDBACK, "NG16-SU-FEEDBACK");
|
|
PFLAG(PHY, 5, NG16_MU_FEEDBACK, "NG16-MU-FEEDBACK");
|
|
|
|
PFLAG(PHY, 6, CODEBOOK_SIZE_42_SU, "CODEBOOK-SIZE-42-SU");
|
|
PFLAG(PHY, 6, CODEBOOK_SIZE_75_MU, "CODEBOOK-SIZE-75-MU");
|
|
PFLAG(PHY, 6, TRIG_SU_BEAMFORMER_FB, "TRIG-SU-BEAMFORMER-FB");
|
|
PFLAG(PHY, 6, TRIG_MU_BEAMFORMER_FB, "TRIG-MU-BEAMFORMER-FB");
|
|
PFLAG(PHY, 6, TRIG_CQI_FB, "TRIG-CQI-FB");
|
|
PFLAG(PHY, 6, PARTIAL_BW_EXT_RANGE, "PARTIAL-BW-EXT-RANGE");
|
|
PFLAG(PHY, 6, PARTIAL_BANDWIDTH_DL_MUMIMO,
|
|
"PARTIAL-BANDWIDTH-DL-MUMIMO");
|
|
PFLAG(PHY, 6, PPE_THRESHOLD_PRESENT, "PPE-THRESHOLD-PRESENT");
|
|
|
|
PFLAG(PHY, 7, SRP_BASED_SR, "SRP-BASED-SR");
|
|
PFLAG(PHY, 7, POWER_BOOST_FACTOR_AR, "POWER-BOOST-FACTOR-AR");
|
|
PFLAG(PHY, 7, HE_SU_MU_PPDU_4XLTF_AND_08_US_GI,
|
|
"HE-SU-MU-PPDU-4XLTF-AND-08-US-GI");
|
|
PFLAG_RANGE(PHY, 7, MAX_NC, 0, 1, 1, "MAX-NC-%d");
|
|
PFLAG(PHY, 7, STBC_TX_ABOVE_80MHZ, "STBC-TX-ABOVE-80MHZ");
|
|
PFLAG(PHY, 7, STBC_RX_ABOVE_80MHZ, "STBC-RX-ABOVE-80MHZ");
|
|
|
|
PFLAG(PHY, 8, HE_ER_SU_PPDU_4XLTF_AND_08_US_GI,
|
|
"HE-ER-SU-PPDU-4XLTF-AND-08-US-GI");
|
|
PFLAG(PHY, 8, 20MHZ_IN_40MHZ_HE_PPDU_IN_2G,
|
|
"20MHZ-IN-40MHZ-HE-PPDU-IN-2G");
|
|
PFLAG(PHY, 8, 20MHZ_IN_160MHZ_HE_PPDU, "20MHZ-IN-160MHZ-HE-PPDU");
|
|
PFLAG(PHY, 8, 80MHZ_IN_160MHZ_HE_PPDU, "80MHZ-IN-160MHZ-HE-PPDU");
|
|
PFLAG(PHY, 8, HE_ER_SU_1XLTF_AND_08_US_GI,
|
|
"HE-ER-SU-1XLTF-AND-08-US-GI");
|
|
PFLAG(PHY, 8, MIDAMBLE_RX_TX_2X_AND_1XLTF,
|
|
"MIDAMBLE-RX-TX-2X-AND-1XLTF");
|
|
|
|
switch (cap[8] & IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_MASK) {
|
|
case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242:
|
|
PRINT("DCM-MAX-RU-242");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484:
|
|
PRINT("DCM-MAX-RU-484");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_996:
|
|
PRINT("DCM-MAX-RU-996");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996:
|
|
PRINT("DCM-MAX-RU-2x996");
|
|
break;
|
|
}
|
|
|
|
PFLAG(PHY, 9, LONGER_THAN_16_SIGB_OFDM_SYM,
|
|
"LONGER-THAN-16-SIGB-OFDM-SYM");
|
|
PFLAG(PHY, 9, NON_TRIGGERED_CQI_FEEDBACK,
|
|
"NON-TRIGGERED-CQI-FEEDBACK");
|
|
PFLAG(PHY, 9, TX_1024_QAM_LESS_THAN_242_TONE_RU,
|
|
"TX-1024-QAM-LESS-THAN-242-TONE-RU");
|
|
PFLAG(PHY, 9, RX_1024_QAM_LESS_THAN_242_TONE_RU,
|
|
"RX-1024-QAM-LESS-THAN-242-TONE-RU");
|
|
PFLAG(PHY, 9, RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB,
|
|
"RX-FULL-BW-SU-USING-MU-WITH-COMP-SIGB");
|
|
PFLAG(PHY, 9, RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB,
|
|
"RX-FULL-BW-SU-USING-MU-WITH-NON-COMP-SIGB");
|
|
|
|
switch (cap[9] & IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_MASK) {
|
|
case IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_0US:
|
|
PRINT("NOMINAL-PACKET-PADDING-0US");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_8US:
|
|
PRINT("NOMINAL-PACKET-PADDING-8US");
|
|
break;
|
|
case IEEE80211_HE_PHY_CAP9_NOMIMAL_PKT_PADDING_16US:
|
|
PRINT("NOMINAL-PACKET-PADDING-16US");
|
|
break;
|
|
}
|
|
|
|
#undef PFLAG_RANGE_DEFAULT
|
|
#undef PFLAG_RANGE
|
|
#undef PFLAG
|
|
|
|
#define PRINT_NSS_SUPP(f, n) \
|
|
do { \
|
|
int _i; \
|
|
u16 v = le16_to_cpu(nss->f); \
|
|
p += scnprintf(p, buf_sz + buf - p, n ": %#.4x\n", v); \
|
|
for (_i = 0; _i < 8; _i += 2) { \
|
|
switch ((v >> _i) & 0x3) { \
|
|
case 0: \
|
|
PRINT(n "-%d-SUPPORT-0-7", _i / 2); \
|
|
break; \
|
|
case 1: \
|
|
PRINT(n "-%d-SUPPORT-0-9", _i / 2); \
|
|
break; \
|
|
case 2: \
|
|
PRINT(n "-%d-SUPPORT-0-11", _i / 2); \
|
|
break; \
|
|
case 3: \
|
|
PRINT(n "-%d-NOT-SUPPORTED", _i / 2); \
|
|
break; \
|
|
} \
|
|
} \
|
|
} while (0)
|
|
|
|
PRINT_NSS_SUPP(rx_mcs_80, "RX-MCS-80");
|
|
PRINT_NSS_SUPP(tx_mcs_80, "TX-MCS-80");
|
|
|
|
if (cap[0] & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) {
|
|
PRINT_NSS_SUPP(rx_mcs_160, "RX-MCS-160");
|
|
PRINT_NSS_SUPP(tx_mcs_160, "TX-MCS-160");
|
|
}
|
|
|
|
if (cap[0] &
|
|
IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) {
|
|
PRINT_NSS_SUPP(rx_mcs_80p80, "RX-MCS-80P80");
|
|
PRINT_NSS_SUPP(tx_mcs_80p80, "TX-MCS-80P80");
|
|
}
|
|
|
|
#undef PRINT_NSS_SUPP
|
|
#undef PRINT
|
|
|
|
if (!(cap[6] & IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT))
|
|
goto out;
|
|
|
|
p += scnprintf(p, buf_sz + buf - p, "PPE-THRESHOLDS: %#.2x",
|
|
hec->ppe_thres[0]);
|
|
|
|
ppe_size = ieee80211_he_ppe_size(hec->ppe_thres[0], cap);
|
|
for (i = 1; i < ppe_size; i++) {
|
|
p += scnprintf(p, buf_sz + buf - p, " %#.2x",
|
|
hec->ppe_thres[i]);
|
|
}
|
|
p += scnprintf(p, buf_sz + buf - p, "\n");
|
|
|
|
out:
|
|
ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
STA_OPS(he_capa);
|
|
|
|
#define DEBUGFS_ADD(name) \
|
|
debugfs_create_file(#name, 0400, \
|
|
sta->debugfs_dir, sta, &sta_ ##name## _ops);
|
|
|
|
#define DEBUGFS_ADD_COUNTER(name, field) \
|
|
debugfs_create_ulong(#name, 0400, sta->debugfs_dir, &sta->field);
|
|
|
|
void ieee80211_sta_debugfs_add(struct sta_info *sta)
|
|
{
|
|
struct ieee80211_local *local = sta->local;
|
|
struct ieee80211_sub_if_data *sdata = sta->sdata;
|
|
struct dentry *stations_dir = sta->sdata->debugfs.subdir_stations;
|
|
u8 mac[3*ETH_ALEN];
|
|
|
|
if (!stations_dir)
|
|
return;
|
|
|
|
snprintf(mac, sizeof(mac), "%pM", sta->sta.addr);
|
|
|
|
/*
|
|
* This might fail due to a race condition:
|
|
* When mac80211 unlinks a station, the debugfs entries
|
|
* remain, but it is already possible to link a new
|
|
* station with the same address which triggers adding
|
|
* it to debugfs; therefore, if the old station isn't
|
|
* destroyed quickly enough the old station's debugfs
|
|
* dir might still be around.
|
|
*/
|
|
sta->debugfs_dir = debugfs_create_dir(mac, stations_dir);
|
|
|
|
DEBUGFS_ADD(flags);
|
|
DEBUGFS_ADD(aid);
|
|
DEBUGFS_ADD(num_ps_buf_frames);
|
|
DEBUGFS_ADD(last_seq_ctrl);
|
|
DEBUGFS_ADD(agg_status);
|
|
DEBUGFS_ADD(ht_capa);
|
|
DEBUGFS_ADD(vht_capa);
|
|
DEBUGFS_ADD(he_capa);
|
|
|
|
DEBUGFS_ADD_COUNTER(rx_duplicates, rx_stats.num_duplicates);
|
|
DEBUGFS_ADD_COUNTER(rx_fragments, rx_stats.fragments);
|
|
DEBUGFS_ADD_COUNTER(tx_filtered, status_stats.filtered);
|
|
|
|
if (local->ops->wake_tx_queue)
|
|
DEBUGFS_ADD(aqm);
|
|
|
|
if (wiphy_ext_feature_isset(local->hw.wiphy,
|
|
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS))
|
|
DEBUGFS_ADD(airtime);
|
|
|
|
debugfs_create_xul("driver_buffered_tids", 0400, sta->debugfs_dir,
|
|
&sta->driver_buffered_tids);
|
|
|
|
drv_sta_add_debugfs(local, sdata, &sta->sta, sta->debugfs_dir);
|
|
}
|
|
|
|
void ieee80211_sta_debugfs_remove(struct sta_info *sta)
|
|
{
|
|
debugfs_remove_recursive(sta->debugfs_dir);
|
|
sta->debugfs_dir = NULL;
|
|
}
|