forked from Minki/linux
66d857b08b
There is a lot of common code that could be shared between the m68k and m68knommu arch branches. It makes sense to merge the two branches into a single directory structure so that we can more easily share that common code. This is a brute force merge, based on a script from Stephen King <sfking@fdwdc.com>, which was originally written by Arnd Bergmann <arnd@arndb.de>. > The script was inspired by the script Sam Ravnborg used to merge the > includes from m68knommu. For those files common to both arches but > differing in content, the m68k version of the file is renamed to > <file>_mm.<ext> and the m68knommu version of the file is moved into the > corresponding m68k directory and renamed <file>_no.<ext> and a small > wrapper file <file>.<ext> is used to select between the two version. Files > that are common to both but don't differ are removed from the m68knommu > tree and files and directories that are unique to the m68knommu tree are > moved to the m68k tree. Finally, the arch/m68knommu tree is removed. > > To select between the the versions of the files, the wrapper uses > > #ifdef CONFIG_MMU > #include <file>_mm.<ext> > #else > #include <file>_no.<ext> > #endif On top of this file merge I have done a simplistic merge of m68k and m68knommu Kconfig, which primarily attempts to keep existing options and menus in place. Other than a handful of options being moved it produces identical .config outputs on m68k and m68knommu targets I tested it on. With this in place there is now quite a bit of scope for merge cleanups in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
418 lines
14 KiB
Plaintext
418 lines
14 KiB
Plaintext
config GENERIC_IOMAP
|
|
bool
|
|
default y
|
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
|
bool
|
|
depends on BROKEN && (Q40 || SUN3X)
|
|
default y
|
|
|
|
config ARCH_USES_GETTIMEOFFSET
|
|
def_bool y
|
|
|
|
config EISA
|
|
bool
|
|
---help---
|
|
The Extended Industry Standard Architecture (EISA) bus was
|
|
developed as an open alternative to the IBM MicroChannel bus.
|
|
|
|
The EISA bus provided some of the features of the IBM MicroChannel
|
|
bus while maintaining backward compatibility with cards made for
|
|
the older ISA bus. The EISA bus saw limited use between 1988 and
|
|
1995 when it was made obsolete by the PCI bus.
|
|
|
|
Say Y here if you are building a kernel for an EISA-based machine.
|
|
|
|
Otherwise, say N.
|
|
|
|
config MCA
|
|
bool
|
|
help
|
|
MicroChannel Architecture is found in some IBM PS/2 machines and
|
|
laptops. It is a bus system similar to PCI or ISA. See
|
|
<file:Documentation/mca.txt> (and especially the web page given
|
|
there) before attempting to build an MCA bus kernel.
|
|
|
|
config PCMCIA
|
|
tristate
|
|
---help---
|
|
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
|
|
computer. These are credit-card size devices such as network cards,
|
|
modems or hard drives often used with laptops computers. There are
|
|
actually two varieties of these cards: the older 16 bit PCMCIA cards
|
|
and the newer 32 bit CardBus cards. If you want to use CardBus
|
|
cards, you need to say Y here and also to "CardBus support" below.
|
|
|
|
To use your PC-cards, you will need supporting software from David
|
|
Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
|
|
for location). Please also read the PCMCIA-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
To compile this driver as modules, choose M here: the
|
|
modules will be called pcmcia_core and ds.
|
|
|
|
config AMIGA
|
|
bool "Amiga support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
This option enables support for the Amiga series of computers. If
|
|
you plan to use this kernel on an Amiga, say Y here and browse the
|
|
material available in <file:Documentation/m68k>; otherwise say N.
|
|
|
|
config ATARI
|
|
bool "Atari support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
This option enables support for the 68000-based Atari series of
|
|
computers (including the TT, Falcon and Medusa). If you plan to use
|
|
this kernel on an Atari, say Y here and browse the material
|
|
available in <file:Documentation/m68k>; otherwise say N.
|
|
|
|
config MAC
|
|
bool "Macintosh support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
This option enables support for the Apple Macintosh series of
|
|
computers (yes, there is experimental support now, at least for part
|
|
of the series).
|
|
|
|
Say N unless you're willing to code the remaining necessary support.
|
|
;)
|
|
|
|
config NUBUS
|
|
bool
|
|
depends on MAC
|
|
default y
|
|
|
|
config M68K_L2_CACHE
|
|
bool
|
|
depends on MAC
|
|
default y
|
|
|
|
config APOLLO
|
|
bool "Apollo support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
Say Y here if you want to run Linux on an MC680x0-based Apollo
|
|
Domain workstation such as the DN3500.
|
|
|
|
config VME
|
|
bool "VME (Motorola and BVM) support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
Say Y here if you want to build a kernel for a 680x0 based VME
|
|
board. Boards currently supported include Motorola boards MVME147,
|
|
MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
|
|
BVME6000 boards from BVM Ltd are also supported.
|
|
|
|
config MVME147
|
|
bool "MVME147 support"
|
|
depends on VME
|
|
help
|
|
Say Y to include support for early Motorola VME boards. This will
|
|
build a kernel which can run on MVME147 single-board computers. If
|
|
you select this option you will have to select the appropriate
|
|
drivers for SCSI, Ethernet and serial ports later on.
|
|
|
|
config MVME16x
|
|
bool "MVME162, 166 and 167 support"
|
|
depends on VME
|
|
help
|
|
Say Y to include support for Motorola VME boards. This will build a
|
|
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
|
|
MVME177 boards. If you select this option you will have to select
|
|
the appropriate drivers for SCSI, Ethernet and serial ports later
|
|
on.
|
|
|
|
config BVME6000
|
|
bool "BVME4000 and BVME6000 support"
|
|
depends on VME
|
|
help
|
|
Say Y to include support for VME boards from BVM Ltd. This will
|
|
build a kernel which can run on BVME4000 and BVME6000 boards. If
|
|
you select this option you will have to select the appropriate
|
|
drivers for SCSI, Ethernet and serial ports later on.
|
|
|
|
config HP300
|
|
bool "HP9000/300 and HP9000/400 support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
This option enables support for the HP9000/300 and HP9000/400 series
|
|
of workstations. Support for these machines is still somewhat
|
|
experimental. If you plan to try to use the kernel on such a machine
|
|
say Y here.
|
|
Everybody else says N.
|
|
|
|
config DIO
|
|
bool "DIO bus support"
|
|
depends on HP300
|
|
default y
|
|
help
|
|
Say Y here to enable support for the "DIO" expansion bus used in
|
|
HP300 machines. If you are using such a system you almost certainly
|
|
want this.
|
|
|
|
config SUN3X
|
|
bool "Sun3x support"
|
|
select MMU_MOTOROLA if MMU
|
|
select M68030
|
|
help
|
|
This option enables support for the Sun 3x series of workstations.
|
|
Be warned that this support is very experimental.
|
|
Note that Sun 3x kernels are not compatible with Sun 3 hardware.
|
|
General Linux information on the Sun 3x series (now discontinued)
|
|
is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
|
|
|
|
If you don't want to compile a kernel for a Sun 3x, say N.
|
|
|
|
config Q40
|
|
bool "Q40/Q60 support"
|
|
select MMU_MOTOROLA if MMU
|
|
help
|
|
The Q40 is a Motorola 68040-based successor to the Sinclair QL
|
|
manufactured in Germany. There is an official Q40 home page at
|
|
<http://www.q40.de/>. This option enables support for the Q40 and
|
|
Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
|
|
emulation.
|
|
|
|
config SUN3
|
|
bool "Sun3 support"
|
|
depends on !MMU_MOTOROLA
|
|
select MMU_SUN3 if MMU
|
|
select M68020
|
|
help
|
|
This option enables support for the Sun 3 series of workstations
|
|
(3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
|
|
that all other hardware types must be disabled, as Sun 3 kernels
|
|
are incompatible with all other m68k targets (including Sun 3x!).
|
|
|
|
If you don't want to compile a kernel exclusively for a Sun 3, say N.
|
|
|
|
config NATFEAT
|
|
bool "ARAnyM emulator support"
|
|
depends on ATARI
|
|
help
|
|
This option enables support for ARAnyM native features, such as
|
|
access to a disk image as /dev/hda.
|
|
|
|
config NFBLOCK
|
|
tristate "NatFeat block device support"
|
|
depends on BLOCK && NATFEAT
|
|
help
|
|
Say Y to include support for the ARAnyM NatFeat block device
|
|
which allows direct access to the hard drives without using
|
|
the hardware emulation.
|
|
|
|
config NFCON
|
|
tristate "NatFeat console driver"
|
|
depends on NATFEAT
|
|
help
|
|
Say Y to include support for the ARAnyM NatFeat console driver
|
|
which allows the console output to be redirected to the stderr
|
|
output of ARAnyM.
|
|
|
|
config NFETH
|
|
tristate "NatFeat Ethernet support"
|
|
depends on NET_ETHERNET && NATFEAT
|
|
help
|
|
Say Y to include support for the ARAnyM NatFeat network device
|
|
which will emulate a regular ethernet device while presenting an
|
|
ethertap device to the host system.
|
|
|
|
comment "Processor type"
|
|
|
|
config M68020
|
|
bool "68020 support"
|
|
help
|
|
If you anticipate running this kernel on a computer with a MC68020
|
|
processor, say Y. Otherwise, say N. Note that the 68020 requires a
|
|
68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
|
|
Sun 3, which provides its own version.
|
|
|
|
config M68030
|
|
bool "68030 support"
|
|
depends on !MMU_SUN3
|
|
help
|
|
If you anticipate running this kernel on a computer with a MC68030
|
|
processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
|
|
work, as it does not include an MMU (Memory Management Unit).
|
|
|
|
config M68040
|
|
bool "68040 support"
|
|
depends on !MMU_SUN3
|
|
help
|
|
If you anticipate running this kernel on a computer with a MC68LC040
|
|
or MC68040 processor, say Y. Otherwise, say N. Note that an
|
|
MC68EC040 will not work, as it does not include an MMU (Memory
|
|
Management Unit).
|
|
|
|
config M68060
|
|
bool "68060 support"
|
|
depends on !MMU_SUN3
|
|
help
|
|
If you anticipate running this kernel on a computer with a MC68060
|
|
processor, say Y. Otherwise, say N.
|
|
|
|
config MMU_MOTOROLA
|
|
bool
|
|
|
|
config MMU_SUN3
|
|
bool
|
|
depends on MMU && !MMU_MOTOROLA
|
|
|
|
config M68KFPU_EMU
|
|
bool "Math emulation support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
help
|
|
At some point in the future, this will cause floating-point math
|
|
instructions to be emulated by the kernel on machines that lack a
|
|
floating-point math coprocessor. Thrill-seekers and chronically
|
|
sleep-deprived psychotic hacker types can say Y now, everyone else
|
|
should probably wait a while.
|
|
|
|
config M68KFPU_EMU_EXTRAPREC
|
|
bool "Math emulation extra precision"
|
|
depends on M68KFPU_EMU
|
|
help
|
|
The fpu uses normally a few bit more during calculations for
|
|
correct rounding, the emulator can (often) do the same but this
|
|
extra calculation can cost quite some time, so you can disable
|
|
it here. The emulator will then "only" calculate with a 64 bit
|
|
mantissa and round slightly incorrect, what is more than enough
|
|
for normal usage.
|
|
|
|
config M68KFPU_EMU_ONLY
|
|
bool "Math emulation only kernel"
|
|
depends on M68KFPU_EMU
|
|
help
|
|
This option prevents any floating-point instructions from being
|
|
compiled into the kernel, thereby the kernel doesn't save any
|
|
floating point context anymore during task switches, so this
|
|
kernel will only be usable on machines without a floating-point
|
|
math coprocessor. This makes the kernel a bit faster as no tests
|
|
needs to be executed whether a floating-point instruction in the
|
|
kernel should be executed or not.
|
|
|
|
config ADVANCED
|
|
bool "Advanced configuration options"
|
|
---help---
|
|
This gives you access to some advanced options for the CPU. The
|
|
defaults should be fine for most users, but these options may make
|
|
it possible for you to improve performance somewhat if you know what
|
|
you are doing.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about these options.
|
|
|
|
Most users should say N to this question.
|
|
|
|
config RMW_INSNS
|
|
bool "Use read-modify-write instructions"
|
|
depends on ADVANCED
|
|
---help---
|
|
This allows to use certain instructions that work with indivisible
|
|
read-modify-write bus cycles. While this is faster than the
|
|
workaround of disabling interrupts, it can conflict with DMA
|
|
( = direct memory access) on many Amiga systems, and it is also said
|
|
to destabilize other machines. It is very likely that this will
|
|
cause serious problems on any Amiga or Atari Medusa if set. The only
|
|
configuration where it should work are 68030-based Ataris, where it
|
|
apparently improves performance. But you've been warned! Unless you
|
|
really know what you are doing, say N. Try Y only if you're quite
|
|
adventurous.
|
|
|
|
config SINGLE_MEMORY_CHUNK
|
|
bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
|
|
default y if SUN3
|
|
select NEED_MULTIPLE_NODES
|
|
help
|
|
Ignore all but the first contiguous chunk of physical memory for VM
|
|
purposes. This will save a few bytes kernel size and may speed up
|
|
some operations. Say N if not sure.
|
|
|
|
config 060_WRITETHROUGH
|
|
bool "Use write-through caching for 68060 supervisor accesses"
|
|
depends on ADVANCED && M68060
|
|
---help---
|
|
The 68060 generally uses copyback caching of recently accessed data.
|
|
Copyback caching means that memory writes will be held in an on-chip
|
|
cache and only written back to memory some time later. Saying Y
|
|
here will force supervisor (kernel) accesses to use writethrough
|
|
caching. Writethrough caching means that data is written to memory
|
|
straight away, so that cache and memory data always agree.
|
|
Writethrough caching is less efficient, but is needed for some
|
|
drivers on 68060 based systems where the 68060 bus snooping signal
|
|
is hardwired on. The 53c710 SCSI driver is known to suffer from
|
|
this problem.
|
|
|
|
config ARCH_DISCONTIGMEM_ENABLE
|
|
def_bool !SINGLE_MEMORY_CHUNK
|
|
|
|
config NODES_SHIFT
|
|
int
|
|
default "3"
|
|
depends on !SINGLE_MEMORY_CHUNK
|
|
|
|
config ZORRO
|
|
bool "Amiga Zorro (AutoConfig) bus support"
|
|
depends on AMIGA
|
|
help
|
|
This enables support for the Zorro bus in the Amiga. If you have
|
|
expansion cards in your Amiga that conform to the Amiga
|
|
AutoConfig(tm) specification, say Y, otherwise N. Note that even
|
|
expansion cards that do not fit in the Zorro slots but fit in e.g.
|
|
the CPU slot may fall in this category, so you have to say Y to let
|
|
Linux use these.
|
|
|
|
config AMIGA_PCMCIA
|
|
bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
|
|
depends on AMIGA && EXPERIMENTAL
|
|
help
|
|
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
|
|
600. If you intend to use pcmcia cards say Y; otherwise say N.
|
|
|
|
config STRAM_PROC
|
|
bool "ST-RAM statistics in /proc"
|
|
depends on ATARI
|
|
help
|
|
Say Y here to report ST-RAM usage statistics in /proc/stram.
|
|
|
|
config HEARTBEAT
|
|
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
|
|
default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
|
|
help
|
|
Use the power-on LED on your machine as a load meter. The exact
|
|
behavior is platform-dependent, but normally the flash frequency is
|
|
a hyperbolic function of the 5-minute load average.
|
|
|
|
# We have a dedicated heartbeat LED. :-)
|
|
config PROC_HARDWARE
|
|
bool "/proc/hardware support"
|
|
help
|
|
Say Y here to support the /proc/hardware file, which gives you
|
|
access to information about the machine you're running on,
|
|
including the model, CPU, MMU, clock speed, BogoMIPS rating,
|
|
and memory size.
|
|
|
|
config ISA
|
|
bool
|
|
depends on Q40 || AMIGA_PCMCIA
|
|
default y
|
|
help
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
inside your box. Other bus systems are PCI, EISA, MicroChannel
|
|
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
|
|
newer boards don't support it. If you have ISA, say Y, otherwise N.
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
depends on Q40 || AMIGA_PCMCIA
|
|
default y
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
source "drivers/zorro/Kconfig"
|
|
|