forked from Minki/linux
9d469d033d
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2273 lines
52 KiB
C
2273 lines
52 KiB
C
/*
|
|
* Atmel maXTouch Touchscreen driver
|
|
*
|
|
* Copyright (C) 2010 Samsung Electronics Co.Ltd
|
|
* Copyright (C) 2011-2014 Atmel Corporation
|
|
* Copyright (C) 2012 Google, Inc.
|
|
*
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/atmel_mxt_ts.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Version */
|
|
#define MXT_VER_20 20
|
|
#define MXT_VER_21 21
|
|
#define MXT_VER_22 22
|
|
|
|
/* Firmware files */
|
|
#define MXT_FW_NAME "maxtouch.fw"
|
|
#define MXT_CFG_NAME "maxtouch.cfg"
|
|
#define MXT_CFG_MAGIC "OBP_RAW V1"
|
|
|
|
/* Registers */
|
|
#define MXT_INFO 0x00
|
|
#define MXT_FAMILY_ID 0x00
|
|
#define MXT_VARIANT_ID 0x01
|
|
#define MXT_VERSION 0x02
|
|
#define MXT_BUILD 0x03
|
|
#define MXT_MATRIX_X_SIZE 0x04
|
|
#define MXT_MATRIX_Y_SIZE 0x05
|
|
#define MXT_OBJECT_NUM 0x06
|
|
#define MXT_OBJECT_START 0x07
|
|
|
|
#define MXT_OBJECT_SIZE 6
|
|
#define MXT_INFO_CHECKSUM_SIZE 3
|
|
#define MXT_MAX_BLOCK_WRITE 256
|
|
|
|
/* Object types */
|
|
#define MXT_DEBUG_DIAGNOSTIC_T37 37
|
|
#define MXT_GEN_MESSAGE_T5 5
|
|
#define MXT_GEN_COMMAND_T6 6
|
|
#define MXT_GEN_POWER_T7 7
|
|
#define MXT_GEN_ACQUIRE_T8 8
|
|
#define MXT_GEN_DATASOURCE_T53 53
|
|
#define MXT_TOUCH_MULTI_T9 9
|
|
#define MXT_TOUCH_KEYARRAY_T15 15
|
|
#define MXT_TOUCH_PROXIMITY_T23 23
|
|
#define MXT_TOUCH_PROXKEY_T52 52
|
|
#define MXT_PROCI_GRIPFACE_T20 20
|
|
#define MXT_PROCG_NOISE_T22 22
|
|
#define MXT_PROCI_ONETOUCH_T24 24
|
|
#define MXT_PROCI_TWOTOUCH_T27 27
|
|
#define MXT_PROCI_GRIP_T40 40
|
|
#define MXT_PROCI_PALM_T41 41
|
|
#define MXT_PROCI_TOUCHSUPPRESSION_T42 42
|
|
#define MXT_PROCI_STYLUS_T47 47
|
|
#define MXT_PROCG_NOISESUPPRESSION_T48 48
|
|
#define MXT_SPT_COMMSCONFIG_T18 18
|
|
#define MXT_SPT_GPIOPWM_T19 19
|
|
#define MXT_SPT_SELFTEST_T25 25
|
|
#define MXT_SPT_CTECONFIG_T28 28
|
|
#define MXT_SPT_USERDATA_T38 38
|
|
#define MXT_SPT_DIGITIZER_T43 43
|
|
#define MXT_SPT_MESSAGECOUNT_T44 44
|
|
#define MXT_SPT_CTECONFIG_T46 46
|
|
|
|
/* MXT_GEN_MESSAGE_T5 object */
|
|
#define MXT_RPTID_NOMSG 0xff
|
|
|
|
/* MXT_GEN_COMMAND_T6 field */
|
|
#define MXT_COMMAND_RESET 0
|
|
#define MXT_COMMAND_BACKUPNV 1
|
|
#define MXT_COMMAND_CALIBRATE 2
|
|
#define MXT_COMMAND_REPORTALL 3
|
|
#define MXT_COMMAND_DIAGNOSTIC 5
|
|
|
|
/* Define for T6 status byte */
|
|
#define MXT_T6_STATUS_RESET (1 << 7)
|
|
#define MXT_T6_STATUS_OFL (1 << 6)
|
|
#define MXT_T6_STATUS_SIGERR (1 << 5)
|
|
#define MXT_T6_STATUS_CAL (1 << 4)
|
|
#define MXT_T6_STATUS_CFGERR (1 << 3)
|
|
#define MXT_T6_STATUS_COMSERR (1 << 2)
|
|
|
|
/* MXT_GEN_POWER_T7 field */
|
|
struct t7_config {
|
|
u8 idle;
|
|
u8 active;
|
|
} __packed;
|
|
|
|
#define MXT_POWER_CFG_RUN 0
|
|
#define MXT_POWER_CFG_DEEPSLEEP 1
|
|
|
|
/* MXT_GEN_ACQUIRE_T8 field */
|
|
#define MXT_ACQUIRE_CHRGTIME 0
|
|
#define MXT_ACQUIRE_TCHDRIFT 2
|
|
#define MXT_ACQUIRE_DRIFTST 3
|
|
#define MXT_ACQUIRE_TCHAUTOCAL 4
|
|
#define MXT_ACQUIRE_SYNC 5
|
|
#define MXT_ACQUIRE_ATCHCALST 6
|
|
#define MXT_ACQUIRE_ATCHCALSTHR 7
|
|
|
|
/* MXT_TOUCH_MULTI_T9 field */
|
|
#define MXT_T9_ORIENT 9
|
|
#define MXT_T9_RANGE 18
|
|
|
|
/* MXT_TOUCH_MULTI_T9 status */
|
|
#define MXT_T9_UNGRIP (1 << 0)
|
|
#define MXT_T9_SUPPRESS (1 << 1)
|
|
#define MXT_T9_AMP (1 << 2)
|
|
#define MXT_T9_VECTOR (1 << 3)
|
|
#define MXT_T9_MOVE (1 << 4)
|
|
#define MXT_T9_RELEASE (1 << 5)
|
|
#define MXT_T9_PRESS (1 << 6)
|
|
#define MXT_T9_DETECT (1 << 7)
|
|
|
|
struct t9_range {
|
|
u16 x;
|
|
u16 y;
|
|
} __packed;
|
|
|
|
/* MXT_TOUCH_MULTI_T9 orient */
|
|
#define MXT_T9_ORIENT_SWITCH (1 << 0)
|
|
|
|
/* MXT_PROCI_GRIPFACE_T20 field */
|
|
#define MXT_GRIPFACE_CTRL 0
|
|
#define MXT_GRIPFACE_XLOGRIP 1
|
|
#define MXT_GRIPFACE_XHIGRIP 2
|
|
#define MXT_GRIPFACE_YLOGRIP 3
|
|
#define MXT_GRIPFACE_YHIGRIP 4
|
|
#define MXT_GRIPFACE_MAXTCHS 5
|
|
#define MXT_GRIPFACE_SZTHR1 7
|
|
#define MXT_GRIPFACE_SZTHR2 8
|
|
#define MXT_GRIPFACE_SHPTHR1 9
|
|
#define MXT_GRIPFACE_SHPTHR2 10
|
|
#define MXT_GRIPFACE_SUPEXTTO 11
|
|
|
|
/* MXT_PROCI_NOISE field */
|
|
#define MXT_NOISE_CTRL 0
|
|
#define MXT_NOISE_OUTFLEN 1
|
|
#define MXT_NOISE_GCAFUL_LSB 3
|
|
#define MXT_NOISE_GCAFUL_MSB 4
|
|
#define MXT_NOISE_GCAFLL_LSB 5
|
|
#define MXT_NOISE_GCAFLL_MSB 6
|
|
#define MXT_NOISE_ACTVGCAFVALID 7
|
|
#define MXT_NOISE_NOISETHR 8
|
|
#define MXT_NOISE_FREQHOPSCALE 10
|
|
#define MXT_NOISE_FREQ0 11
|
|
#define MXT_NOISE_FREQ1 12
|
|
#define MXT_NOISE_FREQ2 13
|
|
#define MXT_NOISE_FREQ3 14
|
|
#define MXT_NOISE_FREQ4 15
|
|
#define MXT_NOISE_IDLEGCAFVALID 16
|
|
|
|
/* MXT_SPT_COMMSCONFIG_T18 */
|
|
#define MXT_COMMS_CTRL 0
|
|
#define MXT_COMMS_CMD 1
|
|
|
|
/* MXT_SPT_CTECONFIG_T28 field */
|
|
#define MXT_CTE_CTRL 0
|
|
#define MXT_CTE_CMD 1
|
|
#define MXT_CTE_MODE 2
|
|
#define MXT_CTE_IDLEGCAFDEPTH 3
|
|
#define MXT_CTE_ACTVGCAFDEPTH 4
|
|
#define MXT_CTE_VOLTAGE 5
|
|
|
|
#define MXT_VOLTAGE_DEFAULT 2700000
|
|
#define MXT_VOLTAGE_STEP 10000
|
|
|
|
/* Define for MXT_GEN_COMMAND_T6 */
|
|
#define MXT_BOOT_VALUE 0xa5
|
|
#define MXT_RESET_VALUE 0x01
|
|
#define MXT_BACKUP_VALUE 0x55
|
|
|
|
/* Delay times */
|
|
#define MXT_BACKUP_TIME 50 /* msec */
|
|
#define MXT_RESET_TIME 200 /* msec */
|
|
#define MXT_RESET_TIMEOUT 3000 /* msec */
|
|
#define MXT_CRC_TIMEOUT 1000 /* msec */
|
|
#define MXT_FW_RESET_TIME 3000 /* msec */
|
|
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
|
|
|
|
/* Command to unlock bootloader */
|
|
#define MXT_UNLOCK_CMD_MSB 0xaa
|
|
#define MXT_UNLOCK_CMD_LSB 0xdc
|
|
|
|
/* Bootloader mode status */
|
|
#define MXT_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */
|
|
#define MXT_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */
|
|
#define MXT_FRAME_CRC_CHECK 0x02
|
|
#define MXT_FRAME_CRC_FAIL 0x03
|
|
#define MXT_FRAME_CRC_PASS 0x04
|
|
#define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */
|
|
#define MXT_BOOT_STATUS_MASK 0x3f
|
|
#define MXT_BOOT_EXTENDED_ID (1 << 5)
|
|
#define MXT_BOOT_ID_MASK 0x1f
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MXT_MAX_AREA 0xff
|
|
|
|
#define MXT_PIXELS_PER_MM 20
|
|
|
|
struct mxt_info {
|
|
u8 family_id;
|
|
u8 variant_id;
|
|
u8 version;
|
|
u8 build;
|
|
u8 matrix_xsize;
|
|
u8 matrix_ysize;
|
|
u8 object_num;
|
|
};
|
|
|
|
struct mxt_object {
|
|
u8 type;
|
|
u16 start_address;
|
|
u8 size_minus_one;
|
|
u8 instances_minus_one;
|
|
u8 num_report_ids;
|
|
} __packed;
|
|
|
|
/* Each client has this additional data */
|
|
struct mxt_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
char phys[64]; /* device physical location */
|
|
const struct mxt_platform_data *pdata;
|
|
struct mxt_object *object_table;
|
|
struct mxt_info info;
|
|
unsigned int irq;
|
|
unsigned int max_x;
|
|
unsigned int max_y;
|
|
bool in_bootloader;
|
|
u16 mem_size;
|
|
u8 max_reportid;
|
|
u32 config_crc;
|
|
u32 info_crc;
|
|
u8 bootloader_addr;
|
|
u8 *msg_buf;
|
|
u8 t6_status;
|
|
bool update_input;
|
|
u8 last_message_count;
|
|
u8 num_touchids;
|
|
struct t7_config t7_cfg;
|
|
|
|
/* Cached parameters from object table */
|
|
u16 T5_address;
|
|
u8 T5_msg_size;
|
|
u8 T6_reportid;
|
|
u16 T6_address;
|
|
u16 T7_address;
|
|
u8 T9_reportid_min;
|
|
u8 T9_reportid_max;
|
|
u8 T19_reportid;
|
|
u16 T44_address;
|
|
|
|
/* for fw update in bootloader */
|
|
struct completion bl_completion;
|
|
|
|
/* for reset handling */
|
|
struct completion reset_completion;
|
|
|
|
/* for config update handling */
|
|
struct completion crc_completion;
|
|
};
|
|
|
|
static size_t mxt_obj_size(const struct mxt_object *obj)
|
|
{
|
|
return obj->size_minus_one + 1;
|
|
}
|
|
|
|
static size_t mxt_obj_instances(const struct mxt_object *obj)
|
|
{
|
|
return obj->instances_minus_one + 1;
|
|
}
|
|
|
|
static bool mxt_object_readable(unsigned int type)
|
|
{
|
|
switch (type) {
|
|
case MXT_GEN_COMMAND_T6:
|
|
case MXT_GEN_POWER_T7:
|
|
case MXT_GEN_ACQUIRE_T8:
|
|
case MXT_GEN_DATASOURCE_T53:
|
|
case MXT_TOUCH_MULTI_T9:
|
|
case MXT_TOUCH_KEYARRAY_T15:
|
|
case MXT_TOUCH_PROXIMITY_T23:
|
|
case MXT_TOUCH_PROXKEY_T52:
|
|
case MXT_PROCI_GRIPFACE_T20:
|
|
case MXT_PROCG_NOISE_T22:
|
|
case MXT_PROCI_ONETOUCH_T24:
|
|
case MXT_PROCI_TWOTOUCH_T27:
|
|
case MXT_PROCI_GRIP_T40:
|
|
case MXT_PROCI_PALM_T41:
|
|
case MXT_PROCI_TOUCHSUPPRESSION_T42:
|
|
case MXT_PROCI_STYLUS_T47:
|
|
case MXT_PROCG_NOISESUPPRESSION_T48:
|
|
case MXT_SPT_COMMSCONFIG_T18:
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
case MXT_SPT_SELFTEST_T25:
|
|
case MXT_SPT_CTECONFIG_T28:
|
|
case MXT_SPT_USERDATA_T38:
|
|
case MXT_SPT_DIGITIZER_T43:
|
|
case MXT_SPT_CTECONFIG_T46:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void mxt_dump_message(struct mxt_data *data, u8 *message)
|
|
{
|
|
dev_dbg(&data->client->dev, "message: %*ph\n",
|
|
data->T5_msg_size, message);
|
|
}
|
|
|
|
static int mxt_wait_for_completion(struct mxt_data *data,
|
|
struct completion *comp,
|
|
unsigned int timeout_ms)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
unsigned long timeout = msecs_to_jiffies(timeout_ms);
|
|
long ret;
|
|
|
|
ret = wait_for_completion_interruptible_timeout(comp, timeout);
|
|
if (ret < 0) {
|
|
return ret;
|
|
} else if (ret == 0) {
|
|
dev_err(dev, "Wait for completion timed out.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_bootloader_read(struct mxt_data *data,
|
|
u8 *val, unsigned int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
|
|
msg.addr = data->bootloader_addr;
|
|
msg.flags = data->client->flags & I2C_M_TEN;
|
|
msg.flags |= I2C_M_RD;
|
|
msg.len = count;
|
|
msg.buf = val;
|
|
|
|
ret = i2c_transfer(data->client->adapter, &msg, 1);
|
|
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
ret = ret < 0 ? ret : -EIO;
|
|
dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_bootloader_write(struct mxt_data *data,
|
|
const u8 * const val, unsigned int count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg;
|
|
|
|
msg.addr = data->bootloader_addr;
|
|
msg.flags = data->client->flags & I2C_M_TEN;
|
|
msg.len = count;
|
|
msg.buf = (u8 *)val;
|
|
|
|
ret = i2c_transfer(data->client->adapter, &msg, 1);
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
ret = ret < 0 ? ret : -EIO;
|
|
dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
|
|
{
|
|
u8 appmode = data->client->addr;
|
|
u8 bootloader;
|
|
|
|
switch (appmode) {
|
|
case 0x4a:
|
|
case 0x4b:
|
|
/* Chips after 1664S use different scheme */
|
|
if (retry || data->info.family_id >= 0xa2) {
|
|
bootloader = appmode - 0x24;
|
|
break;
|
|
}
|
|
/* Fall through for normal case */
|
|
case 0x4c:
|
|
case 0x4d:
|
|
case 0x5a:
|
|
case 0x5b:
|
|
bootloader = appmode - 0x26;
|
|
break;
|
|
default:
|
|
dev_err(&data->client->dev,
|
|
"Appmode i2c address 0x%02x not found\n",
|
|
appmode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->bootloader_addr = bootloader;
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_probe_bootloader(struct mxt_data *data, bool retry)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int ret;
|
|
u8 val;
|
|
bool crc_failure;
|
|
|
|
ret = mxt_lookup_bootloader_address(data, retry);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mxt_bootloader_read(data, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check app crc fail mode */
|
|
crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
|
|
|
|
dev_err(dev, "Detected bootloader, status:%02X%s\n",
|
|
val, crc_failure ? ", APP_CRC_FAIL" : "");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 buf[3];
|
|
|
|
if (val & MXT_BOOT_EXTENDED_ID) {
|
|
if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
|
|
dev_err(dev, "%s: i2c failure\n", __func__);
|
|
return val;
|
|
}
|
|
|
|
dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
|
|
|
|
return buf[0];
|
|
} else {
|
|
dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
|
|
|
|
return val;
|
|
}
|
|
}
|
|
|
|
static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
|
|
bool wait)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 val;
|
|
int ret;
|
|
|
|
recheck:
|
|
if (wait) {
|
|
/*
|
|
* In application update mode, the interrupt
|
|
* line signals state transitions. We must wait for the
|
|
* CHG assertion before reading the status byte.
|
|
* Once the status byte has been read, the line is deasserted.
|
|
*/
|
|
ret = mxt_wait_for_completion(data, &data->bl_completion,
|
|
MXT_FW_CHG_TIMEOUT);
|
|
if (ret) {
|
|
/*
|
|
* TODO: handle -ERESTARTSYS better by terminating
|
|
* fw update process before returning to userspace
|
|
* by writing length 0x000 to device (iff we are in
|
|
* WAITING_FRAME_DATA state).
|
|
*/
|
|
dev_err(dev, "Update wait error %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = mxt_bootloader_read(data, &val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (state == MXT_WAITING_BOOTLOAD_CMD)
|
|
val = mxt_get_bootloader_version(data, val);
|
|
|
|
switch (state) {
|
|
case MXT_WAITING_BOOTLOAD_CMD:
|
|
case MXT_WAITING_FRAME_DATA:
|
|
case MXT_APP_CRC_FAIL:
|
|
val &= ~MXT_BOOT_STATUS_MASK;
|
|
break;
|
|
case MXT_FRAME_CRC_PASS:
|
|
if (val == MXT_FRAME_CRC_CHECK) {
|
|
goto recheck;
|
|
} else if (val == MXT_FRAME_CRC_FAIL) {
|
|
dev_err(dev, "Bootloader CRC fail\n");
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (val != state) {
|
|
dev_err(dev, "Invalid bootloader state %02X != %02X\n",
|
|
val, state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
|
|
{
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
if (unlock) {
|
|
buf[0] = MXT_UNLOCK_CMD_LSB;
|
|
buf[1] = MXT_UNLOCK_CMD_MSB;
|
|
} else {
|
|
buf[0] = 0x01;
|
|
buf[1] = 0x01;
|
|
}
|
|
|
|
ret = mxt_bootloader_write(data, buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __mxt_read_reg(struct i2c_client *client,
|
|
u16 reg, u16 len, void *val)
|
|
{
|
|
struct i2c_msg xfer[2];
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
|
|
/* Write register */
|
|
xfer[0].addr = client->addr;
|
|
xfer[0].flags = 0;
|
|
xfer[0].len = 2;
|
|
xfer[0].buf = buf;
|
|
|
|
/* Read data */
|
|
xfer[1].addr = client->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = len;
|
|
xfer[1].buf = val;
|
|
|
|
ret = i2c_transfer(client->adapter, xfer, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
|
|
const void *val)
|
|
{
|
|
u8 *buf;
|
|
size_t count;
|
|
int ret;
|
|
|
|
count = len + 2;
|
|
buf = kmalloc(count, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = (reg >> 8) & 0xff;
|
|
memcpy(&buf[2], val, len);
|
|
|
|
ret = i2c_master_send(client, buf, count);
|
|
if (ret == count) {
|
|
ret = 0;
|
|
} else {
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
dev_err(&client->dev, "%s: i2c send failed (%d)\n",
|
|
__func__, ret);
|
|
}
|
|
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
|
|
{
|
|
return __mxt_write_reg(client, reg, 1, &val);
|
|
}
|
|
|
|
static struct mxt_object *
|
|
mxt_get_object(struct mxt_data *data, u8 type)
|
|
{
|
|
struct mxt_object *object;
|
|
int i;
|
|
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
if (object->type == type)
|
|
return object;
|
|
}
|
|
|
|
dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
|
|
return NULL;
|
|
}
|
|
|
|
static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 status = msg[1];
|
|
u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
|
|
|
|
complete(&data->crc_completion);
|
|
|
|
if (crc != data->config_crc) {
|
|
data->config_crc = crc;
|
|
dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
|
|
}
|
|
|
|
/* Detect reset */
|
|
if (status & MXT_T6_STATUS_RESET)
|
|
complete(&data->reset_completion);
|
|
|
|
/* Output debug if status has changed */
|
|
if (status != data->t6_status)
|
|
dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
|
|
status,
|
|
status == 0 ? " OK" : "",
|
|
status & MXT_T6_STATUS_RESET ? " RESET" : "",
|
|
status & MXT_T6_STATUS_OFL ? " OFL" : "",
|
|
status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
|
|
status & MXT_T6_STATUS_CAL ? " CAL" : "",
|
|
status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
|
|
status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
|
|
|
|
/* Save current status */
|
|
data->t6_status = status;
|
|
}
|
|
|
|
static void mxt_input_button(struct mxt_data *data, u8 *message)
|
|
{
|
|
struct input_dev *input = data->input_dev;
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
bool button;
|
|
int i;
|
|
|
|
/* Active-low switch */
|
|
for (i = 0; i < pdata->t19_num_keys; i++) {
|
|
if (pdata->t19_keymap[i] == KEY_RESERVED)
|
|
continue;
|
|
button = !(message[1] & (1 << i));
|
|
input_report_key(input, pdata->t19_keymap[i], button);
|
|
}
|
|
}
|
|
|
|
static void mxt_input_sync(struct mxt_data *data)
|
|
{
|
|
input_mt_report_pointer_emulation(data->input_dev,
|
|
data->pdata->t19_num_keys);
|
|
input_sync(data->input_dev);
|
|
}
|
|
|
|
static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int id;
|
|
u8 status;
|
|
int x;
|
|
int y;
|
|
int area;
|
|
int amplitude;
|
|
|
|
id = message[0] - data->T9_reportid_min;
|
|
status = message[1];
|
|
x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
|
|
y = (message[3] << 4) | ((message[4] & 0xf));
|
|
|
|
/* Handle 10/12 bit switching */
|
|
if (data->max_x < 1024)
|
|
x >>= 2;
|
|
if (data->max_y < 1024)
|
|
y >>= 2;
|
|
|
|
area = message[5];
|
|
amplitude = message[6];
|
|
|
|
dev_dbg(dev,
|
|
"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
|
|
id,
|
|
(status & MXT_T9_DETECT) ? 'D' : '.',
|
|
(status & MXT_T9_PRESS) ? 'P' : '.',
|
|
(status & MXT_T9_RELEASE) ? 'R' : '.',
|
|
(status & MXT_T9_MOVE) ? 'M' : '.',
|
|
(status & MXT_T9_VECTOR) ? 'V' : '.',
|
|
(status & MXT_T9_AMP) ? 'A' : '.',
|
|
(status & MXT_T9_SUPPRESS) ? 'S' : '.',
|
|
(status & MXT_T9_UNGRIP) ? 'U' : '.',
|
|
x, y, area, amplitude);
|
|
|
|
input_mt_slot(input_dev, id);
|
|
|
|
if (status & MXT_T9_DETECT) {
|
|
/*
|
|
* Multiple bits may be set if the host is slow to read
|
|
* the status messages, indicating all the events that
|
|
* have happened.
|
|
*/
|
|
if (status & MXT_T9_RELEASE) {
|
|
input_mt_report_slot_state(input_dev,
|
|
MT_TOOL_FINGER, 0);
|
|
mxt_input_sync(data);
|
|
}
|
|
|
|
/* Touch active */
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
|
|
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
|
|
} else {
|
|
/* Touch no longer active, close out slot */
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
|
|
}
|
|
|
|
data->update_input = true;
|
|
}
|
|
|
|
static int mxt_proc_message(struct mxt_data *data, u8 *message)
|
|
{
|
|
u8 report_id = message[0];
|
|
|
|
if (report_id == MXT_RPTID_NOMSG)
|
|
return 0;
|
|
|
|
if (report_id == data->T6_reportid) {
|
|
mxt_proc_t6_messages(data, message);
|
|
} else if (!data->input_dev) {
|
|
/*
|
|
* Do not report events if input device
|
|
* is not yet registered.
|
|
*/
|
|
mxt_dump_message(data, message);
|
|
} else if (report_id >= data->T9_reportid_min
|
|
&& report_id <= data->T9_reportid_max) {
|
|
mxt_proc_t9_message(data, message);
|
|
} else if (report_id == data->T19_reportid) {
|
|
mxt_input_button(data, message);
|
|
data->update_input = true;
|
|
} else {
|
|
mxt_dump_message(data, message);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int ret;
|
|
int i;
|
|
u8 num_valid = 0;
|
|
|
|
/* Safety check for msg_buf */
|
|
if (count > data->max_reportid)
|
|
return -EINVAL;
|
|
|
|
/* Process remaining messages if necessary */
|
|
ret = __mxt_read_reg(data->client, data->T5_address,
|
|
data->T5_msg_size * count, data->msg_buf);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < count; i++) {
|
|
ret = mxt_proc_message(data,
|
|
data->msg_buf + data->T5_msg_size * i);
|
|
|
|
if (ret == 1)
|
|
num_valid++;
|
|
}
|
|
|
|
/* return number of messages read */
|
|
return num_valid;
|
|
}
|
|
|
|
static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int ret;
|
|
u8 count, num_left;
|
|
|
|
/* Read T44 and T5 together */
|
|
ret = __mxt_read_reg(data->client, data->T44_address,
|
|
data->T5_msg_size + 1, data->msg_buf);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
count = data->msg_buf[0];
|
|
|
|
if (count == 0) {
|
|
dev_warn(dev, "Interrupt triggered but zero messages\n");
|
|
return IRQ_NONE;
|
|
} else if (count > data->max_reportid) {
|
|
dev_err(dev, "T44 count %d exceeded max report id\n", count);
|
|
count = data->max_reportid;
|
|
}
|
|
|
|
/* Process first message */
|
|
ret = mxt_proc_message(data, data->msg_buf + 1);
|
|
if (ret < 0) {
|
|
dev_warn(dev, "Unexpected invalid message\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
num_left = count - 1;
|
|
|
|
/* Process remaining messages if necessary */
|
|
if (num_left) {
|
|
ret = mxt_read_and_process_messages(data, num_left);
|
|
if (ret < 0)
|
|
goto end;
|
|
else if (ret != num_left)
|
|
dev_warn(dev, "Unexpected invalid message\n");
|
|
}
|
|
|
|
end:
|
|
if (data->update_input) {
|
|
mxt_input_sync(data);
|
|
data->update_input = false;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mxt_process_messages_until_invalid(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int count, read;
|
|
u8 tries = 2;
|
|
|
|
count = data->max_reportid;
|
|
|
|
/* Read messages until we force an invalid */
|
|
do {
|
|
read = mxt_read_and_process_messages(data, count);
|
|
if (read < count)
|
|
return 0;
|
|
} while (--tries);
|
|
|
|
if (data->update_input) {
|
|
mxt_input_sync(data);
|
|
data->update_input = false;
|
|
}
|
|
|
|
dev_err(dev, "CHG pin isn't cleared\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
static irqreturn_t mxt_process_messages(struct mxt_data *data)
|
|
{
|
|
int total_handled, num_handled;
|
|
u8 count = data->last_message_count;
|
|
|
|
if (count < 1 || count > data->max_reportid)
|
|
count = 1;
|
|
|
|
/* include final invalid message */
|
|
total_handled = mxt_read_and_process_messages(data, count + 1);
|
|
if (total_handled < 0)
|
|
return IRQ_NONE;
|
|
/* if there were invalid messages, then we are done */
|
|
else if (total_handled <= count)
|
|
goto update_count;
|
|
|
|
/* keep reading two msgs until one is invalid or reportid limit */
|
|
do {
|
|
num_handled = mxt_read_and_process_messages(data, 2);
|
|
if (num_handled < 0)
|
|
return IRQ_NONE;
|
|
|
|
total_handled += num_handled;
|
|
|
|
if (num_handled < 2)
|
|
break;
|
|
} while (total_handled < data->num_touchids);
|
|
|
|
update_count:
|
|
data->last_message_count = total_handled;
|
|
|
|
if (data->update_input) {
|
|
mxt_input_sync(data);
|
|
data->update_input = false;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t mxt_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mxt_data *data = dev_id;
|
|
|
|
if (data->in_bootloader) {
|
|
/* bootloader state transition completion */
|
|
complete(&data->bl_completion);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!data->object_table)
|
|
return IRQ_HANDLED;
|
|
|
|
if (data->T44_address) {
|
|
return mxt_process_messages_t44(data);
|
|
} else {
|
|
return mxt_process_messages(data);
|
|
}
|
|
}
|
|
|
|
static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
|
|
u8 value, bool wait)
|
|
{
|
|
u16 reg;
|
|
u8 command_register;
|
|
int timeout_counter = 0;
|
|
int ret;
|
|
|
|
reg = data->T6_address + cmd_offset;
|
|
|
|
ret = mxt_write_reg(data->client, reg, value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!wait)
|
|
return 0;
|
|
|
|
do {
|
|
msleep(20);
|
|
ret = __mxt_read_reg(data->client, reg, 1, &command_register);
|
|
if (ret)
|
|
return ret;
|
|
} while (command_register != 0 && timeout_counter++ <= 100);
|
|
|
|
if (timeout_counter > 100) {
|
|
dev_err(&data->client->dev, "Command failed!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_soft_reset(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int ret = 0;
|
|
|
|
dev_info(dev, "Resetting chip\n");
|
|
|
|
reinit_completion(&data->reset_completion);
|
|
|
|
ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mxt_wait_for_completion(data, &data->reset_completion,
|
|
MXT_RESET_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
|
|
{
|
|
/*
|
|
* On failure, CRC is set to 0 and config will always be
|
|
* downloaded.
|
|
*/
|
|
data->config_crc = 0;
|
|
reinit_completion(&data->crc_completion);
|
|
|
|
mxt_t6_command(data, cmd, value, true);
|
|
|
|
/*
|
|
* Wait for crc message. On failure, CRC is set to 0 and config will
|
|
* always be downloaded.
|
|
*/
|
|
mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
|
|
}
|
|
|
|
static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
|
|
{
|
|
static const unsigned int crcpoly = 0x80001B;
|
|
u32 result;
|
|
u32 data_word;
|
|
|
|
data_word = (secondbyte << 8) | firstbyte;
|
|
result = ((*crc << 1) ^ data_word);
|
|
|
|
if (result & 0x1000000)
|
|
result ^= crcpoly;
|
|
|
|
*crc = result;
|
|
}
|
|
|
|
static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
|
|
{
|
|
u32 crc = 0;
|
|
u8 *ptr = base + start_off;
|
|
u8 *last_val = base + end_off - 1;
|
|
|
|
if (end_off < start_off)
|
|
return -EINVAL;
|
|
|
|
while (ptr < last_val) {
|
|
mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
|
|
ptr += 2;
|
|
}
|
|
|
|
/* if len is odd, fill the last byte with 0 */
|
|
if (ptr == last_val)
|
|
mxt_calc_crc24(&crc, *ptr, 0);
|
|
|
|
/* Mask to 24-bit */
|
|
crc &= 0x00FFFFFF;
|
|
|
|
return crc;
|
|
}
|
|
|
|
/*
|
|
* mxt_update_cfg - download configuration to chip
|
|
*
|
|
* Atmel Raw Config File Format
|
|
*
|
|
* The first four lines of the raw config file contain:
|
|
* 1) Version
|
|
* 2) Chip ID Information (first 7 bytes of device memory)
|
|
* 3) Chip Information Block 24-bit CRC Checksum
|
|
* 4) Chip Configuration 24-bit CRC Checksum
|
|
*
|
|
* The rest of the file consists of one line per object instance:
|
|
* <TYPE> <INSTANCE> <SIZE> <CONTENTS>
|
|
*
|
|
* <TYPE> - 2-byte object type as hex
|
|
* <INSTANCE> - 2-byte object instance number as hex
|
|
* <SIZE> - 2-byte object size as hex
|
|
* <CONTENTS> - array of <SIZE> 1-byte hex values
|
|
*/
|
|
static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
struct mxt_info cfg_info;
|
|
struct mxt_object *object;
|
|
int ret;
|
|
int offset;
|
|
int data_pos;
|
|
int byte_offset;
|
|
int i;
|
|
int cfg_start_ofs;
|
|
u32 info_crc, config_crc, calculated_crc;
|
|
u8 *config_mem;
|
|
size_t config_mem_size;
|
|
unsigned int type, instance, size;
|
|
u8 val;
|
|
u16 reg;
|
|
|
|
mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
|
|
|
|
if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
|
|
dev_err(dev, "Unrecognised config file\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
|
|
data_pos = strlen(MXT_CFG_MAGIC);
|
|
|
|
/* Load information block and check */
|
|
for (i = 0; i < sizeof(struct mxt_info); i++) {
|
|
ret = sscanf(cfg->data + data_pos, "%hhx%n",
|
|
(unsigned char *)&cfg_info + i,
|
|
&offset);
|
|
if (ret != 1) {
|
|
dev_err(dev, "Bad format\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
|
|
data_pos += offset;
|
|
}
|
|
|
|
if (cfg_info.family_id != data->info.family_id) {
|
|
dev_err(dev, "Family ID mismatch!\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
|
|
if (cfg_info.variant_id != data->info.variant_id) {
|
|
dev_err(dev, "Variant ID mismatch!\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
|
|
/* Read CRCs */
|
|
ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
|
|
if (ret != 1) {
|
|
dev_err(dev, "Bad format: failed to parse Info CRC\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
data_pos += offset;
|
|
|
|
ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
|
|
if (ret != 1) {
|
|
dev_err(dev, "Bad format: failed to parse Config CRC\n");
|
|
ret = -EINVAL;
|
|
goto release;
|
|
}
|
|
data_pos += offset;
|
|
|
|
/*
|
|
* The Info Block CRC is calculated over mxt_info and the object
|
|
* table. If it does not match then we are trying to load the
|
|
* configuration from a different chip or firmware version, so
|
|
* the configuration CRC is invalid anyway.
|
|
*/
|
|
if (info_crc == data->info_crc) {
|
|
if (config_crc == 0 || data->config_crc == 0) {
|
|
dev_info(dev, "CRC zero, attempting to apply config\n");
|
|
} else if (config_crc == data->config_crc) {
|
|
dev_dbg(dev, "Config CRC 0x%06X: OK\n",
|
|
data->config_crc);
|
|
ret = 0;
|
|
goto release;
|
|
} else {
|
|
dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
|
|
data->config_crc, config_crc);
|
|
}
|
|
} else {
|
|
dev_warn(dev,
|
|
"Warning: Info CRC error - device=0x%06X file=0x%06X\n",
|
|
data->info_crc, info_crc);
|
|
}
|
|
|
|
/* Malloc memory to store configuration */
|
|
cfg_start_ofs = MXT_OBJECT_START +
|
|
data->info.object_num * sizeof(struct mxt_object) +
|
|
MXT_INFO_CHECKSUM_SIZE;
|
|
config_mem_size = data->mem_size - cfg_start_ofs;
|
|
config_mem = kzalloc(config_mem_size, GFP_KERNEL);
|
|
if (!config_mem) {
|
|
dev_err(dev, "Failed to allocate memory\n");
|
|
ret = -ENOMEM;
|
|
goto release;
|
|
}
|
|
|
|
while (data_pos < cfg->size) {
|
|
/* Read type, instance, length */
|
|
ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
|
|
&type, &instance, &size, &offset);
|
|
if (ret == 0) {
|
|
/* EOF */
|
|
break;
|
|
} else if (ret != 3) {
|
|
dev_err(dev, "Bad format: failed to parse object\n");
|
|
ret = -EINVAL;
|
|
goto release_mem;
|
|
}
|
|
data_pos += offset;
|
|
|
|
object = mxt_get_object(data, type);
|
|
if (!object) {
|
|
/* Skip object */
|
|
for (i = 0; i < size; i++) {
|
|
ret = sscanf(cfg->data + data_pos, "%hhx%n",
|
|
&val,
|
|
&offset);
|
|
data_pos += offset;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (size > mxt_obj_size(object)) {
|
|
/*
|
|
* Either we are in fallback mode due to wrong
|
|
* config or config from a later fw version,
|
|
* or the file is corrupt or hand-edited.
|
|
*/
|
|
dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
|
|
size - mxt_obj_size(object), type);
|
|
} else if (mxt_obj_size(object) > size) {
|
|
/*
|
|
* If firmware is upgraded, new bytes may be added to
|
|
* end of objects. It is generally forward compatible
|
|
* to zero these bytes - previous behaviour will be
|
|
* retained. However this does invalidate the CRC and
|
|
* will force fallback mode until the configuration is
|
|
* updated. We warn here but do nothing else - the
|
|
* malloc has zeroed the entire configuration.
|
|
*/
|
|
dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
|
|
mxt_obj_size(object) - size, type);
|
|
}
|
|
|
|
if (instance >= mxt_obj_instances(object)) {
|
|
dev_err(dev, "Object instances exceeded!\n");
|
|
ret = -EINVAL;
|
|
goto release_mem;
|
|
}
|
|
|
|
reg = object->start_address + mxt_obj_size(object) * instance;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
ret = sscanf(cfg->data + data_pos, "%hhx%n",
|
|
&val,
|
|
&offset);
|
|
if (ret != 1) {
|
|
dev_err(dev, "Bad format in T%d\n", type);
|
|
ret = -EINVAL;
|
|
goto release_mem;
|
|
}
|
|
data_pos += offset;
|
|
|
|
if (i > mxt_obj_size(object))
|
|
continue;
|
|
|
|
byte_offset = reg + i - cfg_start_ofs;
|
|
|
|
if ((byte_offset >= 0)
|
|
&& (byte_offset <= config_mem_size)) {
|
|
*(config_mem + byte_offset) = val;
|
|
} else {
|
|
dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
|
|
reg, object->type, byte_offset);
|
|
ret = -EINVAL;
|
|
goto release_mem;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Calculate crc of the received configs (not the raw config file) */
|
|
if (data->T7_address < cfg_start_ofs) {
|
|
dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
|
|
data->T7_address, cfg_start_ofs);
|
|
ret = 0;
|
|
goto release_mem;
|
|
}
|
|
|
|
calculated_crc = mxt_calculate_crc(config_mem,
|
|
data->T7_address - cfg_start_ofs,
|
|
config_mem_size);
|
|
|
|
if (config_crc > 0 && (config_crc != calculated_crc))
|
|
dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
|
|
calculated_crc, config_crc);
|
|
|
|
/* Write configuration as blocks */
|
|
byte_offset = 0;
|
|
while (byte_offset < config_mem_size) {
|
|
size = config_mem_size - byte_offset;
|
|
|
|
if (size > MXT_MAX_BLOCK_WRITE)
|
|
size = MXT_MAX_BLOCK_WRITE;
|
|
|
|
ret = __mxt_write_reg(data->client,
|
|
cfg_start_ofs + byte_offset,
|
|
size, config_mem + byte_offset);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Config write error, ret=%d\n", ret);
|
|
goto release_mem;
|
|
}
|
|
|
|
byte_offset += size;
|
|
}
|
|
|
|
mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
|
|
|
|
ret = mxt_soft_reset(data);
|
|
if (ret)
|
|
goto release_mem;
|
|
|
|
dev_info(dev, "Config successfully updated\n");
|
|
|
|
release_mem:
|
|
kfree(config_mem);
|
|
release:
|
|
release_firmware(cfg);
|
|
return ret;
|
|
}
|
|
|
|
static int mxt_acquire_irq(struct mxt_data *data)
|
|
{
|
|
int error;
|
|
|
|
enable_irq(data->irq);
|
|
|
|
error = mxt_process_messages_until_invalid(data);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_get_info(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
|
|
/* Read 7-byte info block starting at address 0 */
|
|
error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_free_object_table(struct mxt_data *data)
|
|
{
|
|
input_unregister_device(data->input_dev);
|
|
data->input_dev = NULL;
|
|
|
|
kfree(data->object_table);
|
|
data->object_table = NULL;
|
|
kfree(data->msg_buf);
|
|
data->msg_buf = NULL;
|
|
data->T5_address = 0;
|
|
data->T5_msg_size = 0;
|
|
data->T6_reportid = 0;
|
|
data->T7_address = 0;
|
|
data->T9_reportid_min = 0;
|
|
data->T9_reportid_max = 0;
|
|
data->T19_reportid = 0;
|
|
data->T44_address = 0;
|
|
data->max_reportid = 0;
|
|
}
|
|
|
|
static int mxt_get_object_table(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
size_t table_size;
|
|
struct mxt_object *object_table;
|
|
int error;
|
|
int i;
|
|
u8 reportid;
|
|
u16 end_address;
|
|
|
|
table_size = data->info.object_num * sizeof(struct mxt_object);
|
|
object_table = kzalloc(table_size, GFP_KERNEL);
|
|
if (!object_table) {
|
|
dev_err(&data->client->dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
|
|
object_table);
|
|
if (error) {
|
|
kfree(object_table);
|
|
return error;
|
|
}
|
|
|
|
/* Valid Report IDs start counting from 1 */
|
|
reportid = 1;
|
|
data->mem_size = 0;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
struct mxt_object *object = object_table + i;
|
|
u8 min_id, max_id;
|
|
|
|
le16_to_cpus(&object->start_address);
|
|
|
|
if (object->num_report_ids) {
|
|
min_id = reportid;
|
|
reportid += object->num_report_ids *
|
|
mxt_obj_instances(object);
|
|
max_id = reportid - 1;
|
|
} else {
|
|
min_id = 0;
|
|
max_id = 0;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev,
|
|
"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
|
|
object->type, object->start_address,
|
|
mxt_obj_size(object), mxt_obj_instances(object),
|
|
min_id, max_id);
|
|
|
|
switch (object->type) {
|
|
case MXT_GEN_MESSAGE_T5:
|
|
if (data->info.family_id == 0x80) {
|
|
/*
|
|
* On mXT224 read and discard unused CRC byte
|
|
* otherwise DMA reads are misaligned
|
|
*/
|
|
data->T5_msg_size = mxt_obj_size(object);
|
|
} else {
|
|
/* CRC not enabled, so skip last byte */
|
|
data->T5_msg_size = mxt_obj_size(object) - 1;
|
|
}
|
|
data->T5_address = object->start_address;
|
|
case MXT_GEN_COMMAND_T6:
|
|
data->T6_reportid = min_id;
|
|
data->T6_address = object->start_address;
|
|
break;
|
|
case MXT_GEN_POWER_T7:
|
|
data->T7_address = object->start_address;
|
|
break;
|
|
case MXT_TOUCH_MULTI_T9:
|
|
data->T9_reportid_min = min_id;
|
|
data->T9_reportid_max = max_id;
|
|
data->num_touchids = object->num_report_ids
|
|
* mxt_obj_instances(object);
|
|
break;
|
|
case MXT_SPT_MESSAGECOUNT_T44:
|
|
data->T44_address = object->start_address;
|
|
break;
|
|
case MXT_SPT_GPIOPWM_T19:
|
|
data->T19_reportid = min_id;
|
|
break;
|
|
}
|
|
|
|
end_address = object->start_address
|
|
+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
|
|
|
|
if (end_address >= data->mem_size)
|
|
data->mem_size = end_address + 1;
|
|
}
|
|
|
|
/* Store maximum reportid */
|
|
data->max_reportid = reportid;
|
|
|
|
/* If T44 exists, T5 position has to be directly after */
|
|
if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
|
|
dev_err(&client->dev, "Invalid T44 position\n");
|
|
error = -EINVAL;
|
|
goto free_object_table;
|
|
}
|
|
|
|
data->msg_buf = kcalloc(data->max_reportid,
|
|
data->T5_msg_size, GFP_KERNEL);
|
|
if (!data->msg_buf) {
|
|
dev_err(&client->dev, "Failed to allocate message buffer\n");
|
|
error = -ENOMEM;
|
|
goto free_object_table;
|
|
}
|
|
|
|
data->object_table = object_table;
|
|
|
|
return 0;
|
|
|
|
free_object_table:
|
|
mxt_free_object_table(data);
|
|
return error;
|
|
}
|
|
|
|
static int mxt_read_t9_resolution(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
struct t9_range range;
|
|
unsigned char orient;
|
|
struct mxt_object *object;
|
|
|
|
object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
|
|
if (!object)
|
|
return -EINVAL;
|
|
|
|
error = __mxt_read_reg(client,
|
|
object->start_address + MXT_T9_RANGE,
|
|
sizeof(range), &range);
|
|
if (error)
|
|
return error;
|
|
|
|
le16_to_cpus(&range.x);
|
|
le16_to_cpus(&range.y);
|
|
|
|
error = __mxt_read_reg(client,
|
|
object->start_address + MXT_T9_ORIENT,
|
|
1, &orient);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Handle default values */
|
|
if (range.x == 0)
|
|
range.x = 1023;
|
|
|
|
if (range.y == 0)
|
|
range.y = 1023;
|
|
|
|
if (orient & MXT_T9_ORIENT_SWITCH) {
|
|
data->max_x = range.y;
|
|
data->max_y = range.x;
|
|
} else {
|
|
data->max_x = range.x;
|
|
data->max_y = range.y;
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"Touchscreen size X%uY%u\n", data->max_x, data->max_y);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_input_open(struct input_dev *dev);
|
|
static void mxt_input_close(struct input_dev *dev);
|
|
|
|
static int mxt_initialize_t9_input_device(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
const struct mxt_platform_data *pdata = data->pdata;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
unsigned int num_mt_slots;
|
|
unsigned int mt_flags = 0;
|
|
int i;
|
|
|
|
error = mxt_read_t9_resolution(data);
|
|
if (error)
|
|
dev_warn(dev, "Failed to initialize T9 resolution\n");
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev) {
|
|
dev_err(dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
input_dev->name = "Atmel maXTouch Touchscreen";
|
|
input_dev->phys = data->phys;
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = dev;
|
|
input_dev->open = mxt_input_open;
|
|
input_dev->close = mxt_input_close;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
|
|
if (pdata->t19_num_keys) {
|
|
__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
|
|
|
|
for (i = 0; i < pdata->t19_num_keys; i++)
|
|
if (pdata->t19_keymap[i] != KEY_RESERVED)
|
|
input_set_capability(input_dev, EV_KEY,
|
|
pdata->t19_keymap[i]);
|
|
|
|
mt_flags |= INPUT_MT_POINTER;
|
|
|
|
input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
|
|
MXT_PIXELS_PER_MM);
|
|
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
|
|
MXT_PIXELS_PER_MM);
|
|
|
|
input_dev->name = "Atmel maXTouch Touchpad";
|
|
}
|
|
|
|
/* For single touch */
|
|
input_set_abs_params(input_dev, ABS_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
/* For multi touch */
|
|
num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
|
|
error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
|
|
if (error) {
|
|
dev_err(dev, "Error %d initialising slots\n", error);
|
|
goto err_free_mem;
|
|
}
|
|
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, MXT_MAX_AREA, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
|
|
0, data->max_x, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
|
|
0, data->max_y, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_PRESSURE,
|
|
0, 255, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
dev_err(dev, "Error %d registering input device\n", error);
|
|
goto err_free_mem;
|
|
}
|
|
|
|
data->input_dev = input_dev;
|
|
|
|
return 0;
|
|
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
return error;
|
|
}
|
|
|
|
static int mxt_configure_objects(struct mxt_data *data,
|
|
const struct firmware *cfg);
|
|
|
|
static void mxt_config_cb(const struct firmware *cfg, void *ctx)
|
|
{
|
|
mxt_configure_objects(ctx, cfg);
|
|
}
|
|
|
|
static int mxt_initialize(struct mxt_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
bool alt_bootloader_addr = false;
|
|
bool retry = false;
|
|
|
|
retry_info:
|
|
error = mxt_get_info(data);
|
|
if (error) {
|
|
retry_bootloader:
|
|
error = mxt_probe_bootloader(data, alt_bootloader_addr);
|
|
if (error) {
|
|
if (alt_bootloader_addr) {
|
|
/* Chip is not in appmode or bootloader mode */
|
|
return error;
|
|
}
|
|
|
|
dev_info(&client->dev, "Trying alternate bootloader address\n");
|
|
alt_bootloader_addr = true;
|
|
goto retry_bootloader;
|
|
} else {
|
|
if (retry) {
|
|
dev_err(&client->dev, "Could not recover from bootloader mode\n");
|
|
/*
|
|
* We can reflash from this state, so do not
|
|
* abort init
|
|
*/
|
|
data->in_bootloader = true;
|
|
return 0;
|
|
}
|
|
|
|
/* Attempt to exit bootloader into app mode */
|
|
mxt_send_bootloader_cmd(data, false);
|
|
msleep(MXT_FW_RESET_TIME);
|
|
retry = true;
|
|
goto retry_info;
|
|
}
|
|
}
|
|
|
|
/* Get object table information */
|
|
error = mxt_get_object_table(data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Error %d reading object table\n", error);
|
|
return error;
|
|
}
|
|
|
|
mxt_acquire_irq(data);
|
|
if (error)
|
|
goto err_free_object_table;
|
|
|
|
request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
|
|
&data->client->dev, GFP_KERNEL, data,
|
|
mxt_config_cb);
|
|
|
|
return 0;
|
|
|
|
err_free_object_table:
|
|
mxt_free_object_table(data);
|
|
return error;
|
|
}
|
|
|
|
static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int error;
|
|
struct t7_config *new_config;
|
|
struct t7_config deepsleep = { .active = 0, .idle = 0 };
|
|
|
|
if (sleep == MXT_POWER_CFG_DEEPSLEEP)
|
|
new_config = &deepsleep;
|
|
else
|
|
new_config = &data->t7_cfg;
|
|
|
|
error = __mxt_write_reg(data->client, data->T7_address,
|
|
sizeof(data->t7_cfg), new_config);
|
|
if (error)
|
|
return error;
|
|
|
|
dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
|
|
new_config->active, new_config->idle);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_init_t7_power_cfg(struct mxt_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
int error;
|
|
bool retry = false;
|
|
|
|
recheck:
|
|
error = __mxt_read_reg(data->client, data->T7_address,
|
|
sizeof(data->t7_cfg), &data->t7_cfg);
|
|
if (error)
|
|
return error;
|
|
|
|
if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
|
|
if (!retry) {
|
|
dev_dbg(dev, "T7 cfg zero, resetting\n");
|
|
mxt_soft_reset(data);
|
|
retry = true;
|
|
goto recheck;
|
|
} else {
|
|
dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
|
|
data->t7_cfg.active = 20;
|
|
data->t7_cfg.idle = 100;
|
|
return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
|
|
}
|
|
}
|
|
|
|
dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
|
|
data->t7_cfg.active, data->t7_cfg.idle);
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_configure_objects(struct mxt_data *data,
|
|
const struct firmware *cfg)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
struct mxt_info *info = &data->info;
|
|
int error;
|
|
|
|
if (cfg) {
|
|
error = mxt_update_cfg(data, cfg);
|
|
if (error)
|
|
dev_warn(dev, "Error %d updating config\n", error);
|
|
}
|
|
|
|
error = mxt_init_t7_power_cfg(data);
|
|
if (error) {
|
|
dev_err(dev, "Failed to initialize power cfg\n");
|
|
return error;
|
|
}
|
|
|
|
error = mxt_initialize_t9_input_device(data);
|
|
if (error)
|
|
return error;
|
|
|
|
dev_info(dev,
|
|
"Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
|
|
info->family_id, info->variant_id, info->version >> 4,
|
|
info->version & 0xf, info->build, info->object_num);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Firmware Version is returned as Major.Minor.Build */
|
|
static ssize_t mxt_fw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
|
|
info->version >> 4, info->version & 0xf, info->build);
|
|
}
|
|
|
|
/* Hardware Version is returned as FamilyID.VariantID */
|
|
static ssize_t mxt_hw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_info *info = &data->info;
|
|
return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
|
|
info->family_id, info->variant_id);
|
|
}
|
|
|
|
static ssize_t mxt_show_instance(char *buf, int count,
|
|
struct mxt_object *object, int instance,
|
|
const u8 *val)
|
|
{
|
|
int i;
|
|
|
|
if (mxt_obj_instances(object) > 1)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"Instance %u\n", instance);
|
|
|
|
for (i = 0; i < mxt_obj_size(object); i++)
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
|
|
count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t mxt_object_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
struct mxt_object *object;
|
|
int count = 0;
|
|
int i, j;
|
|
int error;
|
|
u8 *obuf;
|
|
|
|
/* Pre-allocate buffer large enough to hold max sized object. */
|
|
obuf = kmalloc(256, GFP_KERNEL);
|
|
if (!obuf)
|
|
return -ENOMEM;
|
|
|
|
error = 0;
|
|
for (i = 0; i < data->info.object_num; i++) {
|
|
object = data->object_table + i;
|
|
|
|
if (!mxt_object_readable(object->type))
|
|
continue;
|
|
|
|
count += scnprintf(buf + count, PAGE_SIZE - count,
|
|
"T%u:\n", object->type);
|
|
|
|
for (j = 0; j < mxt_obj_instances(object); j++) {
|
|
u16 size = mxt_obj_size(object);
|
|
u16 addr = object->start_address + j * size;
|
|
|
|
error = __mxt_read_reg(data->client, addr, size, obuf);
|
|
if (error)
|
|
goto done;
|
|
|
|
count = mxt_show_instance(buf, count, object, j, obuf);
|
|
}
|
|
}
|
|
|
|
done:
|
|
kfree(obuf);
|
|
return error ?: count;
|
|
}
|
|
|
|
static int mxt_check_firmware_format(struct device *dev,
|
|
const struct firmware *fw)
|
|
{
|
|
unsigned int pos = 0;
|
|
char c;
|
|
|
|
while (pos < fw->size) {
|
|
c = *(fw->data + pos);
|
|
|
|
if (c < '0' || (c > '9' && c < 'A') || c > 'F')
|
|
return 0;
|
|
|
|
pos++;
|
|
}
|
|
|
|
/*
|
|
* To convert file try:
|
|
* xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
|
|
*/
|
|
dev_err(dev, "Aborting: firmware file must be in binary format\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mxt_load_fw(struct device *dev, const char *fn)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
const struct firmware *fw = NULL;
|
|
unsigned int frame_size;
|
|
unsigned int pos = 0;
|
|
unsigned int retry = 0;
|
|
unsigned int frame = 0;
|
|
int ret;
|
|
|
|
ret = request_firmware(&fw, fn, dev);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to open firmware %s\n", fn);
|
|
return ret;
|
|
}
|
|
|
|
/* Check for incorrect enc file */
|
|
ret = mxt_check_firmware_format(dev, fw);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
if (!data->in_bootloader) {
|
|
/* Change to the bootloader mode */
|
|
data->in_bootloader = true;
|
|
|
|
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
|
|
MXT_BOOT_VALUE, false);
|
|
if (ret)
|
|
goto release_firmware;
|
|
|
|
msleep(MXT_RESET_TIME);
|
|
|
|
/* Do not need to scan since we know family ID */
|
|
ret = mxt_lookup_bootloader_address(data, 0);
|
|
if (ret)
|
|
goto release_firmware;
|
|
} else {
|
|
enable_irq(data->irq);
|
|
}
|
|
|
|
mxt_free_object_table(data);
|
|
reinit_completion(&data->bl_completion);
|
|
|
|
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
|
|
if (ret) {
|
|
/* Bootloader may still be unlocked from previous attempt */
|
|
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
|
|
if (ret)
|
|
goto disable_irq;
|
|
} else {
|
|
dev_info(dev, "Unlocking bootloader\n");
|
|
|
|
/* Unlock bootloader */
|
|
ret = mxt_send_bootloader_cmd(data, true);
|
|
if (ret)
|
|
goto disable_irq;
|
|
}
|
|
|
|
while (pos < fw->size) {
|
|
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
|
|
|
|
/* Take account of CRC bytes */
|
|
frame_size += 2;
|
|
|
|
/* Write one frame to device */
|
|
ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
|
|
if (ret) {
|
|
retry++;
|
|
|
|
/* Back off by 20ms per retry */
|
|
msleep(retry * 20);
|
|
|
|
if (retry > 20) {
|
|
dev_err(dev, "Retry count exceeded\n");
|
|
goto disable_irq;
|
|
}
|
|
} else {
|
|
retry = 0;
|
|
pos += frame_size;
|
|
frame++;
|
|
}
|
|
|
|
if (frame % 50 == 0)
|
|
dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
|
|
frame, pos, fw->size);
|
|
}
|
|
|
|
/* Wait for flash. */
|
|
ret = mxt_wait_for_completion(data, &data->bl_completion,
|
|
MXT_FW_RESET_TIME);
|
|
if (ret)
|
|
goto disable_irq;
|
|
|
|
dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
|
|
|
|
/*
|
|
* Wait for device to reset. Some bootloader versions do not assert
|
|
* the CHG line after bootloading has finished, so ignore potential
|
|
* errors.
|
|
*/
|
|
mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
|
|
|
|
data->in_bootloader = false;
|
|
|
|
disable_irq:
|
|
disable_irq(data->irq);
|
|
release_firmware:
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t mxt_update_fw_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct mxt_data *data = dev_get_drvdata(dev);
|
|
int error;
|
|
|
|
error = mxt_load_fw(dev, MXT_FW_NAME);
|
|
if (error) {
|
|
dev_err(dev, "The firmware update failed(%d)\n", error);
|
|
count = error;
|
|
} else {
|
|
dev_info(dev, "The firmware update succeeded\n");
|
|
|
|
error = mxt_initialize(data);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
|
|
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
|
|
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
|
|
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
|
|
|
|
static struct attribute *mxt_attrs[] = {
|
|
&dev_attr_fw_version.attr,
|
|
&dev_attr_hw_version.attr,
|
|
&dev_attr_object.attr,
|
|
&dev_attr_update_fw.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mxt_attr_group = {
|
|
.attrs = mxt_attrs,
|
|
};
|
|
|
|
static void mxt_start(struct mxt_data *data)
|
|
{
|
|
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
|
|
|
|
/* Recalibrate since chip has been in deep sleep */
|
|
mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
|
|
}
|
|
|
|
static void mxt_stop(struct mxt_data *data)
|
|
{
|
|
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
|
|
}
|
|
|
|
static int mxt_input_open(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_start(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxt_input_close(struct input_dev *dev)
|
|
{
|
|
struct mxt_data *data = input_get_drvdata(dev);
|
|
|
|
mxt_stop(data);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
|
|
{
|
|
struct mxt_platform_data *pdata;
|
|
u32 *keymap;
|
|
u32 keycode;
|
|
int proplen, i, ret;
|
|
|
|
if (!client->dev.of_node)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
if (of_find_property(client->dev.of_node, "linux,gpio-keymap",
|
|
&proplen)) {
|
|
pdata->t19_num_keys = proplen / sizeof(u32);
|
|
|
|
keymap = devm_kzalloc(&client->dev,
|
|
pdata->t19_num_keys * sizeof(keymap[0]),
|
|
GFP_KERNEL);
|
|
if (!keymap)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
for (i = 0; i < pdata->t19_num_keys; i++) {
|
|
ret = of_property_read_u32_index(client->dev.of_node,
|
|
"linux,gpio-keymap", i, &keycode);
|
|
if (ret)
|
|
keycode = KEY_RESERVED;
|
|
|
|
keymap[i] = keycode;
|
|
}
|
|
|
|
pdata->t19_keymap = keymap;
|
|
}
|
|
|
|
return pdata;
|
|
}
|
|
#else
|
|
static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
|
|
{
|
|
dev_dbg(&client->dev, "No platform data specified\n");
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
#endif
|
|
|
|
static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct mxt_data *data;
|
|
const struct mxt_platform_data *pdata;
|
|
int error;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (!pdata) {
|
|
pdata = mxt_parse_dt(client);
|
|
if (IS_ERR(pdata))
|
|
return PTR_ERR(pdata);
|
|
}
|
|
|
|
data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
|
|
client->adapter->nr, client->addr);
|
|
|
|
data->client = client;
|
|
data->pdata = pdata;
|
|
data->irq = client->irq;
|
|
i2c_set_clientdata(client, data);
|
|
|
|
init_completion(&data->bl_completion);
|
|
init_completion(&data->reset_completion);
|
|
init_completion(&data->crc_completion);
|
|
|
|
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
|
|
pdata->irqflags | IRQF_ONESHOT,
|
|
client->name, data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_free_mem;
|
|
}
|
|
|
|
disable_irq(client->irq);
|
|
|
|
error = mxt_initialize(data);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failure %d creating sysfs group\n",
|
|
error);
|
|
goto err_free_object;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_object:
|
|
mxt_free_object_table(data);
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_free_mem:
|
|
kfree(data);
|
|
return error;
|
|
}
|
|
|
|
static int mxt_remove(struct i2c_client *client)
|
|
{
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
|
|
free_irq(data->irq, data);
|
|
input_unregister_device(data->input_dev);
|
|
mxt_free_object_table(data);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mxt_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_stop(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxt_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mxt_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
mxt_start(data);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
|
|
|
|
static const struct of_device_id mxt_of_match[] = {
|
|
{ .compatible = "atmel,maxtouch", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxt_of_match);
|
|
|
|
static const struct i2c_device_id mxt_id[] = {
|
|
{ "qt602240_ts", 0 },
|
|
{ "atmel_mxt_ts", 0 },
|
|
{ "atmel_mxt_tp", 0 },
|
|
{ "mXT224", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxt_id);
|
|
|
|
static struct i2c_driver mxt_driver = {
|
|
.driver = {
|
|
.name = "atmel_mxt_ts",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(mxt_of_match),
|
|
.pm = &mxt_pm_ops,
|
|
},
|
|
.probe = mxt_probe,
|
|
.remove = mxt_remove,
|
|
.id_table = mxt_id,
|
|
};
|
|
|
|
module_i2c_driver(mxt_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|