forked from Minki/linux
ec336b2841
As the DDR/IO and MMDC setting are different on LPDDR2 and DDR3, we used cpu type to decide how to do these settings in suspend before which is NOT flexible, take i.MX6SL for example, although it has LPDDR2 on EVK board, but users can also use DDR3 on other boards, so it is better to read the DDR type from MMDC then decide how to do related settings. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
347 lines
8.2 KiB
ArmAsm
347 lines
8.2 KiB
ArmAsm
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include "hardware.h"
|
|
|
|
/*
|
|
* ==================== low level suspend ====================
|
|
*
|
|
* Better to follow below rules to use ARM registers:
|
|
* r0: pm_info structure address;
|
|
* r1 ~ r4: for saving pm_info members;
|
|
* r5 ~ r10: free registers;
|
|
* r11: io base address.
|
|
*
|
|
* suspend ocram space layout:
|
|
* ======================== high address ======================
|
|
* .
|
|
* .
|
|
* .
|
|
* ^
|
|
* ^
|
|
* ^
|
|
* imx6_suspend code
|
|
* PM_INFO structure(imx6_cpu_pm_info)
|
|
* ======================== low address =======================
|
|
*/
|
|
|
|
/*
|
|
* Below offsets are based on struct imx6_cpu_pm_info
|
|
* which defined in arch/arm/mach-imx/pm-imx6q.c, this
|
|
* structure contains necessary pm info for low level
|
|
* suspend related code.
|
|
*/
|
|
#define PM_INFO_PBASE_OFFSET 0x0
|
|
#define PM_INFO_RESUME_ADDR_OFFSET 0x4
|
|
#define PM_INFO_DDR_TYPE_OFFSET 0x8
|
|
#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
|
|
#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10
|
|
#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14
|
|
#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18
|
|
#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C
|
|
#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20
|
|
#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24
|
|
#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28
|
|
#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C
|
|
#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30
|
|
#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34
|
|
#define PM_INFO_MX6Q_L2_P_OFFSET 0x38
|
|
#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C
|
|
#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40
|
|
#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44
|
|
|
|
#define MX6Q_SRC_GPR1 0x20
|
|
#define MX6Q_SRC_GPR2 0x24
|
|
#define MX6Q_MMDC_MAPSR 0x404
|
|
#define MX6Q_MMDC_MPDGCTRL0 0x83c
|
|
#define MX6Q_GPC_IMR1 0x08
|
|
#define MX6Q_GPC_IMR2 0x0c
|
|
#define MX6Q_GPC_IMR3 0x10
|
|
#define MX6Q_GPC_IMR4 0x14
|
|
#define MX6Q_CCM_CCR 0x0
|
|
|
|
.align 3
|
|
|
|
.macro sync_l2_cache
|
|
|
|
/* sync L2 cache to drain L2's buffers to DRAM. */
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
|
|
mov r6, #0x0
|
|
str r6, [r11, #L2X0_CACHE_SYNC]
|
|
1:
|
|
ldr r6, [r11, #L2X0_CACHE_SYNC]
|
|
ands r6, r6, #0x1
|
|
bne 1b
|
|
#endif
|
|
|
|
.endm
|
|
|
|
.macro resume_mmdc
|
|
|
|
/* restore MMDC IO */
|
|
cmp r5, #0x0
|
|
ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET]
|
|
|
|
ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
|
|
ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET
|
|
add r7, r7, r0
|
|
1:
|
|
ldr r8, [r7], #0x4
|
|
ldr r9, [r7], #0x4
|
|
str r9, [r11, r8]
|
|
subs r6, r6, #0x1
|
|
bne 1b
|
|
|
|
cmp r5, #0x0
|
|
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
|
|
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
|
|
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
bne 4f
|
|
|
|
/* reset read FIFO, RST_RD_FIFO */
|
|
ldr r7, =MX6Q_MMDC_MPDGCTRL0
|
|
ldr r6, [r11, r7]
|
|
orr r6, r6, #(1 << 31)
|
|
str r6, [r11, r7]
|
|
2:
|
|
ldr r6, [r11, r7]
|
|
ands r6, r6, #(1 << 31)
|
|
bne 2b
|
|
|
|
/* reset FIFO a second time */
|
|
ldr r6, [r11, r7]
|
|
orr r6, r6, #(1 << 31)
|
|
str r6, [r11, r7]
|
|
3:
|
|
ldr r6, [r11, r7]
|
|
ands r6, r6, #(1 << 31)
|
|
bne 3b
|
|
4:
|
|
/* let DDR out of self-refresh */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
bic r7, r7, #(1 << 21)
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
5:
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
ands r7, r7, #(1 << 25)
|
|
bne 5b
|
|
|
|
/* enable DDR auto power saving */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
bic r7, r7, #0x1
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
.endm
|
|
|
|
ENTRY(imx6_suspend)
|
|
ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
|
|
ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
|
|
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
|
|
ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
|
|
|
|
/*
|
|
* counting the resume address in iram
|
|
* to set it in SRC register.
|
|
*/
|
|
ldr r6, =imx6_suspend
|
|
ldr r7, =resume
|
|
sub r7, r7, r6
|
|
add r8, r1, r4
|
|
add r9, r8, r7
|
|
|
|
/*
|
|
* make sure TLB contain the addr we want,
|
|
* as we will access them after MMDC IO floated.
|
|
*/
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldr r6, [r11, #0x0]
|
|
|
|
/* use r11 to store the IO address */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
|
|
/* store physical resume addr and pm_info address. */
|
|
str r9, [r11, #MX6Q_SRC_GPR1]
|
|
str r1, [r11, #MX6Q_SRC_GPR2]
|
|
|
|
/* need to sync L2 cache before DSM. */
|
|
sync_l2_cache
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
|
|
/*
|
|
* put DDR explicitly into self-refresh and
|
|
* disable automatic power savings.
|
|
*/
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
orr r7, r7, #0x1
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
/* make the DDR explicitly enter self-refresh. */
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
orr r7, r7, #(1 << 21)
|
|
str r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
|
|
poll_dvfs_set:
|
|
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
|
|
ands r7, r7, #(1 << 25)
|
|
beq poll_dvfs_set
|
|
|
|
ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
|
|
ldr r6, =0x0
|
|
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
|
|
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
|
|
add r8, r8, r0
|
|
/* LPDDR2's last 3 IOs need special setting */
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
subeq r7, r7, #0x3
|
|
set_mmdc_io_lpm:
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
subs r7, r7, #0x1
|
|
bne set_mmdc_io_lpm
|
|
|
|
cmp r3, #IMX_DDR_TYPE_LPDDR2
|
|
bne set_mmdc_io_lpm_done
|
|
ldr r6, =0x1000
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
ldr r9, [r8], #0x8
|
|
str r6, [r11, r9]
|
|
ldr r6, =0x80000
|
|
ldr r9, [r8]
|
|
str r6, [r11, r9]
|
|
set_mmdc_io_lpm_done:
|
|
|
|
/*
|
|
* mask all GPC interrupts before
|
|
* enabling the RBC counters to
|
|
* avoid the counter starting too
|
|
* early if an interupt is already
|
|
* pending.
|
|
*/
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
ldr r6, [r11, #MX6Q_GPC_IMR1]
|
|
ldr r7, [r11, #MX6Q_GPC_IMR2]
|
|
ldr r8, [r11, #MX6Q_GPC_IMR3]
|
|
ldr r9, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
ldr r10, =0xffffffff
|
|
str r10, [r11, #MX6Q_GPC_IMR1]
|
|
str r10, [r11, #MX6Q_GPC_IMR2]
|
|
str r10, [r11, #MX6Q_GPC_IMR3]
|
|
str r10, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
/*
|
|
* enable the RBC bypass counter here
|
|
* to hold off the interrupts. RBC counter
|
|
* = 32 (1ms), Minimum RBC delay should be
|
|
* 400us for the analog LDOs to power down.
|
|
*/
|
|
ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
|
|
ldr r10, [r11, #MX6Q_CCM_CCR]
|
|
bic r10, r10, #(0x3f << 21)
|
|
orr r10, r10, #(0x20 << 21)
|
|
str r10, [r11, #MX6Q_CCM_CCR]
|
|
|
|
/* enable the counter. */
|
|
ldr r10, [r11, #MX6Q_CCM_CCR]
|
|
orr r10, r10, #(0x1 << 27)
|
|
str r10, [r11, #MX6Q_CCM_CCR]
|
|
|
|
/* unmask all the GPC interrupts. */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
|
|
str r6, [r11, #MX6Q_GPC_IMR1]
|
|
str r7, [r11, #MX6Q_GPC_IMR2]
|
|
str r8, [r11, #MX6Q_GPC_IMR3]
|
|
str r9, [r11, #MX6Q_GPC_IMR4]
|
|
|
|
/*
|
|
* now delay for a short while (3usec)
|
|
* ARM is at 1GHz at this point
|
|
* so a short loop should be enough.
|
|
* this delay is required to ensure that
|
|
* the RBC counter can start counting in
|
|
* case an interrupt is already pending
|
|
* or in case an interrupt arrives just
|
|
* as ARM is about to assert DSM_request.
|
|
*/
|
|
ldr r6, =2000
|
|
rbc_loop:
|
|
subs r6, r6, #0x1
|
|
bne rbc_loop
|
|
|
|
/* Zzz, enter stop mode */
|
|
wfi
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
/*
|
|
* run to here means there is pending
|
|
* wakeup source, system should auto
|
|
* resume, we need to restore MMDC IO first
|
|
*/
|
|
mov r5, #0x0
|
|
resume_mmdc
|
|
|
|
/* return to suspend finish */
|
|
ret lr
|
|
|
|
resume:
|
|
/* invalidate L1 I-cache first */
|
|
mov r6, #0x0
|
|
mcr p15, 0, r6, c7, c5, 0
|
|
mcr p15, 0, r6, c7, c5, 6
|
|
/* enable the Icache and branch prediction */
|
|
mov r6, #0x1800
|
|
mcr p15, 0, r6, c1, c0, 0
|
|
isb
|
|
|
|
/* get physical resume address from pm_info. */
|
|
ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
|
|
/* clear core0's entry and parameter */
|
|
ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET]
|
|
mov r7, #0x0
|
|
str r7, [r11, #MX6Q_SRC_GPR1]
|
|
str r7, [r11, #MX6Q_SRC_GPR2]
|
|
|
|
ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
|
|
mov r5, #0x1
|
|
resume_mmdc
|
|
|
|
ret lr
|
|
ENDPROC(imx6_suspend)
|
|
|
|
/*
|
|
* The following code must assume it is running from physical address
|
|
* where absolute virtual addresses to the data section have to be
|
|
* turned into relative ones.
|
|
*/
|
|
|
|
ENTRY(v7_cpu_resume)
|
|
bl v7_invalidate_l1
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
bl l2c310_early_resume
|
|
#endif
|
|
b cpu_resume
|
|
ENDPROC(v7_cpu_resume)
|