linux/drivers/mtd/maps/ocelot.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

176 lines
4.6 KiB
C

/*
* $Id: ocelot.c,v 1.16 2005/01/05 18:05:13 dwmw2 Exp $
*
* Flash on Momenco Ocelot
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#define OCELOT_PLD 0x2c000000
#define FLASH_WINDOW_ADDR 0x2fc00000
#define FLASH_WINDOW_SIZE 0x00080000
#define FLASH_BUSWIDTH 1
#define NVRAM_WINDOW_ADDR 0x2c800000
#define NVRAM_WINDOW_SIZE 0x00007FF0
#define NVRAM_BUSWIDTH 1
static unsigned int cacheflush = 0;
static struct mtd_info *flash_mtd;
static struct mtd_info *nvram_mtd;
static void ocelot_ram_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
{
struct map_info *map = mtd->priv;
size_t done = 0;
/* If we use memcpy, it does word-wide writes. Even though we told the
GT64120A that it's an 8-bit wide region, word-wide writes don't work.
We end up just writing the first byte of the four to all four bytes.
So we have this loop instead */
*retlen = len;
while(len) {
__raw_writeb(*(unsigned char *) from, map->virt + to);
from++;
to++;
len--;
}
}
static struct mtd_partition *parsed_parts;
struct map_info ocelot_flash_map = {
.name = "Ocelot boot flash",
.size = FLASH_WINDOW_SIZE,
.bankwidth = FLASH_BUSWIDTH,
.phys = FLASH_WINDOW_ADDR,
};
struct map_info ocelot_nvram_map = {
.name = "Ocelot NVRAM",
.size = NVRAM_WINDOW_SIZE,
.bankwidth = NVRAM_BUSWIDTH,
.phys = NVRAM_WINDOW_ADDR,
};
static const char *probes[] = { "RedBoot", NULL };
static int __init init_ocelot_maps(void)
{
void *pld;
int nr_parts;
unsigned char brd_status;
printk(KERN_INFO "Momenco Ocelot MTD mappings: Flash 0x%x at 0x%x, NVRAM 0x%x at 0x%x\n",
FLASH_WINDOW_SIZE, FLASH_WINDOW_ADDR, NVRAM_WINDOW_SIZE, NVRAM_WINDOW_ADDR);
/* First check whether the flash jumper is present */
pld = ioremap(OCELOT_PLD, 0x10);
if (!pld) {
printk(KERN_NOTICE "Failed to ioremap Ocelot PLD\n");
return -EIO;
}
brd_status = readb(pld+4);
iounmap(pld);
/* Now ioremap the NVRAM space */
ocelot_nvram_map.virt = ioremap_nocache(NVRAM_WINDOW_ADDR, NVRAM_WINDOW_SIZE);
if (!ocelot_nvram_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Ocelot NVRAM space\n");
return -EIO;
}
simple_map_init(&ocelot_nvram_map);
/* And do the RAM probe on it to get an MTD device */
nvram_mtd = do_map_probe("map_ram", &ocelot_nvram_map);
if (!nvram_mtd) {
printk("NVRAM probe failed\n");
goto fail_1;
}
nvram_mtd->owner = THIS_MODULE;
nvram_mtd->erasesize = 16;
/* Override the write() method */
nvram_mtd->write = ocelot_ram_write;
/* Now map the flash space */
ocelot_flash_map.virt = ioremap_nocache(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE);
if (!ocelot_flash_map.virt) {
printk(KERN_NOTICE "Failed to ioremap Ocelot flash space\n");
goto fail_2;
}
/* Now the cached version */
ocelot_flash_map.cached = (unsigned long)__ioremap(FLASH_WINDOW_ADDR, FLASH_WINDOW_SIZE, 0);
simple_map_init(&ocelot_flash_map);
/* Only probe for flash if the write jumper is present */
if (brd_status & 0x40) {
flash_mtd = do_map_probe("jedec", &ocelot_flash_map);
} else {
printk(KERN_NOTICE "Ocelot flash write jumper not present. Treating as ROM\n");
}
/* If that failed or the jumper's absent, pretend it's ROM */
if (!flash_mtd) {
flash_mtd = do_map_probe("map_rom", &ocelot_flash_map);
/* If we're treating it as ROM, set the erase size */
if (flash_mtd)
flash_mtd->erasesize = 0x10000;
}
if (!flash_mtd)
goto fail3;
add_mtd_device(nvram_mtd);
flash_mtd->owner = THIS_MODULE;
nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0);
if (nr_parts > 0)
add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
else
add_mtd_device(flash_mtd);
return 0;
fail3:
iounmap((void *)ocelot_flash_map.virt);
if (ocelot_flash_map.cached)
iounmap((void *)ocelot_flash_map.cached);
fail_2:
map_destroy(nvram_mtd);
fail_1:
iounmap((void *)ocelot_nvram_map.virt);
return -ENXIO;
}
static void __exit cleanup_ocelot_maps(void)
{
del_mtd_device(nvram_mtd);
map_destroy(nvram_mtd);
iounmap((void *)ocelot_nvram_map.virt);
if (parsed_parts)
del_mtd_partitions(flash_mtd);
else
del_mtd_device(flash_mtd);
map_destroy(flash_mtd);
iounmap((void *)ocelot_flash_map.virt);
if (ocelot_flash_map.cached)
iounmap((void *)ocelot_flash_map.cached);
}
module_init(init_ocelot_maps);
module_exit(cleanup_ocelot_maps);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
MODULE_DESCRIPTION("MTD map driver for Momenco Ocelot board");