A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
		
			
				
	
	
		
			300 lines
		
	
	
		
			7.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			300 lines
		
	
	
		
			7.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
 | 
						|
 * Copyright (c) 2008-2009 Marvell Semiconductor
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or modify
 | 
						|
 * it under the terms of the GNU General Public License as published by
 | 
						|
 * the Free Software Foundation; either version 2 of the License, or
 | 
						|
 * (at your option) any later version.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/etherdevice.h>
 | 
						|
#include <linux/jiffies.h>
 | 
						|
#include <linux/list.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/netdevice.h>
 | 
						|
#include <linux/phy.h>
 | 
						|
#include <net/dsa.h>
 | 
						|
#include "mv88e6060.h"
 | 
						|
 | 
						|
static int reg_read(struct dsa_switch *ds, int addr, int reg)
 | 
						|
{
 | 
						|
	struct mv88e6060_priv *priv = ds->priv;
 | 
						|
 | 
						|
	return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
 | 
						|
}
 | 
						|
 | 
						|
#define REG_READ(addr, reg)					\
 | 
						|
	({							\
 | 
						|
		int __ret;					\
 | 
						|
								\
 | 
						|
		__ret = reg_read(ds, addr, reg);		\
 | 
						|
		if (__ret < 0)					\
 | 
						|
			return __ret;				\
 | 
						|
		__ret;						\
 | 
						|
	})
 | 
						|
 | 
						|
 | 
						|
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
 | 
						|
{
 | 
						|
	struct mv88e6060_priv *priv = ds->priv;
 | 
						|
 | 
						|
	return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
 | 
						|
}
 | 
						|
 | 
						|
#define REG_WRITE(addr, reg, val)				\
 | 
						|
	({							\
 | 
						|
		int __ret;					\
 | 
						|
								\
 | 
						|
		__ret = reg_write(ds, addr, reg, val);		\
 | 
						|
		if (__ret < 0)					\
 | 
						|
			return __ret;				\
 | 
						|
	})
 | 
						|
 | 
						|
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
 | 
						|
	if (ret >= 0) {
 | 
						|
		if (ret == PORT_SWITCH_ID_6060)
 | 
						|
			return "Marvell 88E6060 (A0)";
 | 
						|
		if (ret == PORT_SWITCH_ID_6060_R1 ||
 | 
						|
		    ret == PORT_SWITCH_ID_6060_R2)
 | 
						|
			return "Marvell 88E6060 (B0)";
 | 
						|
		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
 | 
						|
			return "Marvell 88E6060";
 | 
						|
	}
 | 
						|
 | 
						|
	return NULL;
 | 
						|
}
 | 
						|
 | 
						|
static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
 | 
						|
							int port)
 | 
						|
{
 | 
						|
	return DSA_TAG_PROTO_TRAILER;
 | 
						|
}
 | 
						|
 | 
						|
static const char *mv88e6060_drv_probe(struct device *dsa_dev,
 | 
						|
				       struct device *host_dev, int sw_addr,
 | 
						|
				       void **_priv)
 | 
						|
{
 | 
						|
	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
 | 
						|
	struct mv88e6060_priv *priv;
 | 
						|
	const char *name;
 | 
						|
 | 
						|
	name = mv88e6060_get_name(bus, sw_addr);
 | 
						|
	if (name) {
 | 
						|
		priv = devm_kzalloc(dsa_dev, sizeof(*priv), GFP_KERNEL);
 | 
						|
		if (!priv)
 | 
						|
			return NULL;
 | 
						|
		*_priv = priv;
 | 
						|
		priv->bus = bus;
 | 
						|
		priv->sw_addr = sw_addr;
 | 
						|
	}
 | 
						|
 | 
						|
	return name;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_switch_reset(struct dsa_switch *ds)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	int ret;
 | 
						|
	unsigned long timeout;
 | 
						|
 | 
						|
	/* Set all ports to the disabled state. */
 | 
						|
	for (i = 0; i < MV88E6060_PORTS; i++) {
 | 
						|
		ret = REG_READ(REG_PORT(i), PORT_CONTROL);
 | 
						|
		REG_WRITE(REG_PORT(i), PORT_CONTROL,
 | 
						|
			  ret & ~PORT_CONTROL_STATE_MASK);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Wait for transmit queues to drain. */
 | 
						|
	usleep_range(2000, 4000);
 | 
						|
 | 
						|
	/* Reset the switch. */
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
 | 
						|
		  GLOBAL_ATU_CONTROL_SWRESET |
 | 
						|
		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
 | 
						|
		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
 | 
						|
 | 
						|
	/* Wait up to one second for reset to complete. */
 | 
						|
	timeout = jiffies + 1 * HZ;
 | 
						|
	while (time_before(jiffies, timeout)) {
 | 
						|
		ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
 | 
						|
		if (ret & GLOBAL_STATUS_INIT_READY)
 | 
						|
			break;
 | 
						|
 | 
						|
		usleep_range(1000, 2000);
 | 
						|
	}
 | 
						|
	if (time_after(jiffies, timeout))
 | 
						|
		return -ETIMEDOUT;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_setup_global(struct dsa_switch *ds)
 | 
						|
{
 | 
						|
	/* Disable discarding of frames with excessive collisions,
 | 
						|
	 * set the maximum frame size to 1536 bytes, and mask all
 | 
						|
	 * interrupt sources.
 | 
						|
	 */
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
 | 
						|
 | 
						|
	/* Enable automatic address learning, set the address
 | 
						|
	 * database size to 1024 entries, and set the default aging
 | 
						|
	 * time to 5 minutes.
 | 
						|
	 */
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
 | 
						|
		  GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
 | 
						|
		  GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
 | 
						|
{
 | 
						|
	int addr = REG_PORT(p);
 | 
						|
 | 
						|
	/* Do not force flow control, disable Ingress and Egress
 | 
						|
	 * Header tagging, disable VLAN tunneling, and set the port
 | 
						|
	 * state to Forwarding.  Additionally, if this is the CPU
 | 
						|
	 * port, enable Ingress and Egress Trailer tagging mode.
 | 
						|
	 */
 | 
						|
	REG_WRITE(addr, PORT_CONTROL,
 | 
						|
		  dsa_is_cpu_port(ds, p) ?
 | 
						|
			PORT_CONTROL_TRAILER |
 | 
						|
			PORT_CONTROL_INGRESS_MODE |
 | 
						|
			PORT_CONTROL_STATE_FORWARDING :
 | 
						|
			PORT_CONTROL_STATE_FORWARDING);
 | 
						|
 | 
						|
	/* Port based VLAN map: give each port its own address
 | 
						|
	 * database, allow the CPU port to talk to each of the 'real'
 | 
						|
	 * ports, and allow each of the 'real' ports to only talk to
 | 
						|
	 * the CPU port.
 | 
						|
	 */
 | 
						|
	REG_WRITE(addr, PORT_VLAN_MAP,
 | 
						|
		  ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
 | 
						|
		   (dsa_is_cpu_port(ds, p) ? dsa_user_ports(ds) :
 | 
						|
		    BIT(dsa_to_port(ds, p)->cpu_dp->index)));
 | 
						|
 | 
						|
	/* Port Association Vector: when learning source addresses
 | 
						|
	 * of packets, add the address to the address database using
 | 
						|
	 * a port bitmap that has only the bit for this port set and
 | 
						|
	 * the other bits clear.
 | 
						|
	 */
 | 
						|
	REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_setup_addr(struct dsa_switch *ds)
 | 
						|
{
 | 
						|
	u8 addr[ETH_ALEN];
 | 
						|
	u16 val;
 | 
						|
 | 
						|
	eth_random_addr(addr);
 | 
						|
 | 
						|
	val = addr[0] << 8 | addr[1];
 | 
						|
 | 
						|
	/* The multicast bit is always transmitted as a zero, so the switch uses
 | 
						|
	 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
 | 
						|
	 */
 | 
						|
	val &= 0xfeff;
 | 
						|
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val);
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
 | 
						|
	REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_setup(struct dsa_switch *ds)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
 | 
						|
	ret = mv88e6060_switch_reset(ds);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/* @@@ initialise atu */
 | 
						|
 | 
						|
	ret = mv88e6060_setup_global(ds);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = mv88e6060_setup_addr(ds);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	for (i = 0; i < MV88E6060_PORTS; i++) {
 | 
						|
		ret = mv88e6060_setup_port(ds, i);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_port_to_phy_addr(int port)
 | 
						|
{
 | 
						|
	if (port >= 0 && port < MV88E6060_PORTS)
 | 
						|
		return port;
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
 | 
						|
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
 | 
						|
{
 | 
						|
	int addr;
 | 
						|
 | 
						|
	addr = mv88e6060_port_to_phy_addr(port);
 | 
						|
	if (addr == -1)
 | 
						|
		return 0xffff;
 | 
						|
 | 
						|
	return reg_read(ds, addr, regnum);
 | 
						|
}
 | 
						|
 | 
						|
static int
 | 
						|
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
 | 
						|
{
 | 
						|
	int addr;
 | 
						|
 | 
						|
	addr = mv88e6060_port_to_phy_addr(port);
 | 
						|
	if (addr == -1)
 | 
						|
		return 0xffff;
 | 
						|
 | 
						|
	return reg_write(ds, addr, regnum, val);
 | 
						|
}
 | 
						|
 | 
						|
static const struct dsa_switch_ops mv88e6060_switch_ops = {
 | 
						|
	.get_tag_protocol = mv88e6060_get_tag_protocol,
 | 
						|
	.probe		= mv88e6060_drv_probe,
 | 
						|
	.setup		= mv88e6060_setup,
 | 
						|
	.phy_read	= mv88e6060_phy_read,
 | 
						|
	.phy_write	= mv88e6060_phy_write,
 | 
						|
};
 | 
						|
 | 
						|
static struct dsa_switch_driver mv88e6060_switch_drv = {
 | 
						|
	.ops		= &mv88e6060_switch_ops,
 | 
						|
};
 | 
						|
 | 
						|
static int __init mv88e6060_init(void)
 | 
						|
{
 | 
						|
	register_switch_driver(&mv88e6060_switch_drv);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
module_init(mv88e6060_init);
 | 
						|
 | 
						|
static void __exit mv88e6060_cleanup(void)
 | 
						|
{
 | 
						|
	unregister_switch_driver(&mv88e6060_switch_drv);
 | 
						|
}
 | 
						|
module_exit(mv88e6060_cleanup);
 | 
						|
 | 
						|
MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
 | 
						|
MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
 | 
						|
MODULE_LICENSE("GPL");
 | 
						|
MODULE_ALIAS("platform:mv88e6060");
 |