linux/arch/arm/mach-qcom/platsmp.c

/*
 *  Copyright (C) 2002 ARM Ltd.
 *  All Rights Reserved
 *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
 *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/io.h>

#include <asm/smp_plat.h>

#include "scm-boot.h"

#define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
#define SCSS_CPU1CORE_RESET		0x2d80
#define SCSS_DBG_STATUS_CORE_PWRDUP	0x2e64

#define APCS_CPU_PWR_CTL	0x04
#define PLL_CLAMP		BIT(8)
#define CORE_PWRD_UP		BIT(7)
#define COREPOR_RST		BIT(5)
#define CORE_RST		BIT(4)
#define L2DT_SLP		BIT(3)
#define CLAMP			BIT(0)

#define APC_PWR_GATE_CTL	0x14
#define BHS_CNT_SHIFT		24
#define LDO_PWR_DWN_SHIFT	16
#define LDO_BYP_SHIFT		8
#define BHS_SEG_SHIFT		1
#define BHS_EN			BIT(0)

#define APCS_SAW2_VCTL		0x14
#define APCS_SAW2_2_VCTL	0x1c

extern void secondary_startup(void);

static DEFINE_SPINLOCK(boot_lock);

#ifdef CONFIG_HOTPLUG_CPU
static void __ref qcom_cpu_die(unsigned int cpu)
{
	wfi();
}
#endif

static void qcom_secondary_init(unsigned int cpu)
{
	/*
	 * Synchronise with the boot thread.
	 */
	spin_lock(&boot_lock);
	spin_unlock(&boot_lock);
}

static int scss_release_secondary(unsigned int cpu)
{
	struct device_node *node;
	void __iomem *base;

	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
	if (!node) {
		pr_err("%s: can't find node\n", __func__);
		return -ENXIO;
	}

	base = of_iomap(node, 0);
	of_node_put(node);
	if (!base)
		return -ENOMEM;

	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
	mb();
	iounmap(base);

	return 0;
}

static int kpssv1_release_secondary(unsigned int cpu)
{
	int ret = 0;
	void __iomem *reg, *saw_reg;
	struct device_node *cpu_node, *acc_node, *saw_node;
	u32 val;

	cpu_node = of_get_cpu_node(cpu, NULL);
	if (!cpu_node)
		return -ENODEV;

	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
	if (!acc_node) {
		ret = -ENODEV;
		goto out_acc;
	}

	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
	if (!saw_node) {
		ret = -ENODEV;
		goto out_saw;
	}

	reg = of_iomap(acc_node, 0);
	if (!reg) {
		ret = -ENOMEM;
		goto out_acc_map;
	}

	saw_reg = of_iomap(saw_node, 0);
	if (!saw_reg) {
		ret = -ENOMEM;
		goto out_saw_map;
	}

	/* Turn on CPU rail */
	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
	mb();
	udelay(512);

	/* Krait bring-up sequence */
	val = PLL_CLAMP | L2DT_SLP | CLAMP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	val &= ~L2DT_SLP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	ndelay(300);

	val |= COREPOR_RST;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	val &= ~CLAMP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	val &= ~COREPOR_RST;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(100);

	val |= CORE_PWRD_UP;
	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
	mb();

	iounmap(saw_reg);
out_saw_map:
	iounmap(reg);
out_acc_map:
	of_node_put(saw_node);
out_saw:
	of_node_put(acc_node);
out_acc:
	of_node_put(cpu_node);
	return ret;
}

static int kpssv2_release_secondary(unsigned int cpu)
{
	void __iomem *reg;
	struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
	void __iomem *l2_saw_base;
	unsigned reg_val;
	int ret;

	cpu_node = of_get_cpu_node(cpu, NULL);
	if (!cpu_node)
		return -ENODEV;

	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
	if (!acc_node) {
		ret = -ENODEV;
		goto out_acc;
	}

	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
	if (!l2_node) {
		ret = -ENODEV;
		goto out_l2;
	}

	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
	if (!saw_node) {
		ret = -ENODEV;
		goto out_saw;
	}

	reg = of_iomap(acc_node, 0);
	if (!reg) {
		ret = -ENOMEM;
		goto out_map;
	}

	l2_saw_base = of_iomap(saw_node, 0);
	if (!l2_saw_base) {
		ret = -ENOMEM;
		goto out_saw_map;
	}

	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
	reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
	mb();
	/* wait for the BHS to settle */
	udelay(1);

	/* Turn on BHS segments */
	reg_val |= 0x3f << BHS_SEG_SHIFT;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
	mb();
	 /* wait for the BHS to settle */
	udelay(1);

	/* Finally turn on the bypass so that BHS supplies power */
	reg_val |= 0x3f << LDO_BYP_SHIFT;
	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);

	/* enable max phases */
	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
	mb();
	udelay(50);

	reg_val = COREPOR_RST | CLAMP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	reg_val &= ~CLAMP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();
	udelay(2);

	reg_val &= ~COREPOR_RST;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();

	reg_val |= CORE_PWRD_UP;
	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
	mb();

	ret = 0;

	iounmap(l2_saw_base);
out_saw_map:
	iounmap(reg);
out_map:
	of_node_put(saw_node);
out_saw:
	of_node_put(l2_node);
out_l2:
	of_node_put(acc_node);
out_acc:
	of_node_put(cpu_node);

	return ret;
}

static DEFINE_PER_CPU(int, cold_boot_done);

static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
{
	int ret = 0;

	if (!per_cpu(cold_boot_done, cpu)) {
		ret = func(cpu);
		if (!ret)
			per_cpu(cold_boot_done, cpu) = true;
	}

	/*
	 * set synchronisation state between this boot processor
	 * and the secondary one
	 */
	spin_lock(&boot_lock);

	/*
	 * Send the secondary CPU a soft interrupt, thereby causing
	 * the boot monitor to read the system wide flags register,
	 * and branch to the address found there.
	 */
	arch_send_wakeup_ipi_mask(cpumask_of(cpu));

	/*
	 * now the secondary core is starting up let it run its
	 * calibrations, then wait for it to finish
	 */
	spin_unlock(&boot_lock);

	return ret;
}

static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
	return qcom_boot_secondary(cpu, scss_release_secondary);
}

static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
}

static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
}

static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
	int cpu, map;
	unsigned int flags = 0;
	static const int cold_boot_flags[] = {
		0,
		SCM_FLAG_COLDBOOT_CPU1,
		SCM_FLAG_COLDBOOT_CPU2,
		SCM_FLAG_COLDBOOT_CPU3,
	};

	for_each_present_cpu(cpu) {
		map = cpu_logical_map(cpu);
		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
			set_cpu_present(cpu, false);
			continue;
		}
		flags |= cold_boot_flags[map];
	}

	if (scm_set_boot_addr(virt_to_phys(secondary_startup), flags)) {
		for_each_present_cpu(cpu) {
			if (cpu == smp_processor_id())
				continue;
			set_cpu_present(cpu, false);
		}
		pr_warn("Failed to set CPU boot address, disabling SMP\n");
	}
}

static struct smp_operations smp_msm8660_ops __initdata = {
	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
	.smp_secondary_init	= qcom_secondary_init,
	.smp_boot_secondary	= msm8660_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die		= qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);

static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
	.smp_secondary_init	= qcom_secondary_init,
	.smp_boot_secondary	= kpssv1_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die		= qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);

static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
	.smp_secondary_init	= qcom_secondary_init,
	.smp_boot_secondary	= kpssv2_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
	.cpu_die		= qcom_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);