linux/drivers/net/wireless/ath/wil6210
David S. Miller 6ffe0acc93 wireless-drivers-next patches for 5.2
Most likely the last patchset of new feature for 5.2, and this time we
 have quite a lot of new features. Most obvious being rtw88 from
 Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We
 have also new hardware support for existing drivers and improvements.
 
 There's one conflict in iwlwifi, my example conflict resolution below.
 
 Major changes:
 
 iwlwifi
 
 * bump the 20000-series FW API version
 
 * work on new hardware continues
 
 * RTT confidence indication support for Fine Timing Measurement (FTM)
 
 * an improvement in HE (802.11ax) rate-scaling
 
 * add command version parsing from the fimware TLVs
 
 * add support for a new WoWLAN patterns firmware API
 
 rsi
 
 * add support for rs9116
 
 mwifiex
 
 * add support for SD8987
 
 brcmfmac
 
 * add quirk for ACEPC T8 and T11 mini PCs
 
 rt2x00
 
 * add RT3883 support
 
 qtnfmac
 
 * fix debugfs interface to support multiple cards
 
 rtw88
 
 * new driver
 
 mt76
 
 * share more code across drivers
 
 * add support for MT7615 chipset
 
 * rework DMA API
 
 * tx/rx performance optimizations
 
 * use NAPI for tx cleanup on mt76x02
 
 * AP mode support for USB devices
 
 * USB stability fixes
 
 * tx power handling fixes for 76x2
 
 * endian fixes
 
 Conflicts:
 
 There's a trivial conflict in
 drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave
 IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be
 just empty:
 
 diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h
 index cd622af90077,b0671e16e1ce..000000000000
 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
 +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJczDAZAAoJEG4XJFUm622blLgH/jdBKEq9i1m5dtLi48u4sgPV
 NsnPhR5XQjpbYpmvgPslKLxWzZq6A0P+lo9QqTXkP/QRyJLu7RnoY1c2wVsQbWaK
 VTXc0cROzWt0ihAt8Mc/rEsZpISVnQ9mJbTd/kSJM9WlDeIg0jcJvnEAdQiEmM5t
 2t+zZ5CupUXYbGE3zWHL1GSjBD9f0v7zyrNxYNGfvqhDEXhTFWAmVuRtfoAVlRU+
 dt1HMv+qdxgoF6Uvaw/kgY09mDvdrfy2EVL0q7S3TKceute60SWf7de2sToI/rMQ
 snUnVqTIIUnWPl6g+C3Bp2TbdZhy6XCSRsMFOVa2i1Lt+z1qe3dTr3hjxTQWRhE=
 =uLaP
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 5.2

Most likely the last patchset of new feature for 5.2, and this time we
have quite a lot of new features. Most obvious being rtw88 from
Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We
have also new hardware support for existing drivers and improvements.

There's one conflict in iwlwifi, my example conflict resolution below.

Major changes:

iwlwifi

* bump the 20000-series FW API version

* work on new hardware continues

* RTT confidence indication support for Fine Timing Measurement (FTM)

* an improvement in HE (802.11ax) rate-scaling

* add command version parsing from the fimware TLVs

* add support for a new WoWLAN patterns firmware API

rsi

* add support for rs9116

mwifiex

* add support for SD8987

brcmfmac

* add quirk for ACEPC T8 and T11 mini PCs

rt2x00

* add RT3883 support

qtnfmac

* fix debugfs interface to support multiple cards

rtw88

* new driver

mt76

* share more code across drivers

* add support for MT7615 chipset

* rework DMA API

* tx/rx performance optimizations

* use NAPI for tx cleanup on mt76x02

* AP mode support for USB devices

* USB stability fixes

* tx power handling fixes for 76x2

* endian fixes

Conflicts:

There's a trivial conflict in
drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave
IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be
just empty:

diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h
index cd622af90077,b0671e16e1ce..000000000000
--- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:20:53 -07:00
..
boot_loader.h wil6210: fix random failure to bring network interface up 2018-01-25 07:32:23 +02:00
cfg80211.c wireless-drivers-next patches for 5.2 2019-05-05 10:20:53 -07:00
debug.c wil6210: infrastructure for multiple virtual interfaces 2018-02-27 18:50:19 +02:00
debugfs.c wil6210: reset buff id in status message after completion 2019-04-03 15:45:17 +03:00
ethtool.c wil6210: initialize TX and RX enhanced DMA rings 2018-07-02 17:24:19 +03:00
fw_inc.c wil6210: print error in FW and board files load failures 2019-04-03 15:45:28 +03:00
fw.c wil6210: support Talyn specific board file 2018-07-31 11:01:26 +03:00
fw.h wil6210: support concurrency record in FW file 2018-02-27 18:50:11 +02:00
interrupt.c wil6210: ignore HALP ICR if already handled 2019-02-28 11:24:59 +02:00
Kconfig wil6210: disable tracing config option 2018-05-12 12:26:47 +03:00
main.c wil6210: prevent access to RGF_CAF_ICR in Talyn 2019-04-03 15:44:58 +03:00
Makefile wil6210: initialize TX and RX enhanced DMA rings 2018-07-02 17:24:19 +03:00
netdev.c wil6210: check mid is valid 2019-04-03 15:34:47 +03:00
p2p.c wil6210: rename p2p_wdev_mutex to vif_mutex 2018-02-27 18:50:40 +02:00
pcie_bus.c wil6210: check mid is valid 2019-04-03 15:34:47 +03:00
pm.c wil6210: check mid is valid 2019-04-03 15:34:47 +03:00
pmc.c wil6210: infrastructure for multiple virtual interfaces 2018-02-27 18:50:19 +02:00
pmc.h wil6210: Add pmc debug mechanism memory management 2015-05-04 20:55:43 +03:00
rx_reorder.c wil6210: support up to 20 stations in AP mode 2019-02-28 11:24:29 +02:00
trace.c
trace.h wil6210: support up to 20 stations in AP mode 2019-02-28 11:24:29 +02:00
txrx_edma.c wil6210: reset buff id in status message after completion 2019-04-03 15:45:17 +03:00
txrx_edma.h wil6210: reset buff id in status message after completion 2019-04-03 15:45:17 +03:00
txrx.c wil6210: accessing 802.3 addresses via utility functions 2019-02-28 11:24:39 +02:00
txrx.h wil6210: accessing 802.3 addresses via utility functions 2019-02-28 11:24:39 +02:00
wil6210.h wil6210: reset buff id in status message after completion 2019-04-03 15:45:17 +03:00
wil_crash_dump.c wil6210: prevent device memory access while in reset or suspend 2019-04-03 15:34:04 +03:00
wil_platform.c wil6210: support for platform specific crash recovery 2016-01-07 15:00:44 +02:00
wil_platform.h wil6210: add 3-MSI support 2018-07-31 11:00:33 +03:00
wmi.c wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext 2019-04-03 15:44:48 +03:00
wmi.h wil6210: align to latest auto generated wmi.h 2019-04-03 15:33:53 +03:00