forked from Minki/linux
96173a6c4e
- fix PCI interrupt assignment by emulating ioc3 interrupt pin register - use pci_probe_only mode - select correct page size in bridge - remove no longer needed ioc3_sio_init() code [Ralf: Fix for 64kB or larger pagesizes] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
323 lines
8.5 KiB
C
323 lines
8.5 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 1999, 2000, 04, 06 Ralf Baechle (ralf@linux-mips.org)
|
|
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
|
|
*/
|
|
#include <linux/pci.h>
|
|
#include <asm/paccess.h>
|
|
#include <asm/pci/bridge.h>
|
|
#include <asm/sn/arch.h>
|
|
#include <asm/sn/intr.h>
|
|
#include <asm/sn/sn0/hub.h>
|
|
|
|
/*
|
|
* Most of the IOC3 PCI config register aren't present
|
|
* we emulate what is needed for a normal PCI enumeration
|
|
*/
|
|
static u32 emulate_ioc3_cfg(int where, int size)
|
|
{
|
|
if (size == 1 && where == 0x3d)
|
|
return 0x01;
|
|
else if (size == 2 && where == 0x3c)
|
|
return 0x0100;
|
|
else if (size == 4 && where == 0x3c)
|
|
return 0x00000100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
|
|
* not really documented, so right now I can't write code which uses it.
|
|
* Therefore we use type 0 accesses for now even though they won't work
|
|
* correcly for PCI-to-PCI bridges.
|
|
*
|
|
* The function is complicated by the ultimate brokeness of the IOC3 chip
|
|
* which is used in SGI systems. The IOC3 can only handle 32-bit PCI
|
|
* accesses and does only decode parts of it's address space.
|
|
*/
|
|
|
|
static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 * value)
|
|
{
|
|
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
|
|
bridge_t *bridge = bc->base;
|
|
int slot = PCI_SLOT(devfn);
|
|
int fn = PCI_FUNC(devfn);
|
|
volatile void *addr;
|
|
u32 cf, shift, mask;
|
|
int res;
|
|
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at it for real ...
|
|
*/
|
|
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
|
|
goto oh_my_gawd;
|
|
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
|
|
|
|
if (size == 1)
|
|
res = get_dbe(*value, (u8 *) addr);
|
|
else if (size == 2)
|
|
res = get_dbe(*value, (u16 *) addr);
|
|
else
|
|
res = get_dbe(*value, (u32 *) addr);
|
|
|
|
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
|
|
|
|
oh_my_gawd:
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at the wrong register.
|
|
*/
|
|
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
|
|
*value = emulate_ioc3_cfg(where, size);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't try to access
|
|
* anything but 32-bit words ...
|
|
*/
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
|
|
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
shift = ((where & 3) << 3);
|
|
mask = (0xffffffffU >> ((4 - size) << 3));
|
|
*value = (cf >> shift) & mask;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 * value)
|
|
{
|
|
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
|
|
bridge_t *bridge = bc->base;
|
|
int busno = bus->number;
|
|
int slot = PCI_SLOT(devfn);
|
|
int fn = PCI_FUNC(devfn);
|
|
volatile void *addr;
|
|
u32 cf, shift, mask;
|
|
int res;
|
|
|
|
bridge->b_pci_cfg = (busno << 16) | (slot << 11);
|
|
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at it for real ...
|
|
*/
|
|
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
|
|
goto oh_my_gawd;
|
|
|
|
bridge->b_pci_cfg = (busno << 16) | (slot << 11);
|
|
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
|
|
|
|
if (size == 1)
|
|
res = get_dbe(*value, (u8 *) addr);
|
|
else if (size == 2)
|
|
res = get_dbe(*value, (u16 *) addr);
|
|
else
|
|
res = get_dbe(*value, (u32 *) addr);
|
|
|
|
return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
|
|
|
|
oh_my_gawd:
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at the wrong register.
|
|
*/
|
|
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
|
|
*value = emulate_ioc3_cfg(where, size);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't try to access
|
|
* anything but 32-bit words ...
|
|
*/
|
|
bridge->b_pci_cfg = (busno << 16) | (slot << 11);
|
|
addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
|
|
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
shift = ((where & 3) << 3);
|
|
mask = (0xffffffffU >> ((4 - size) << 3));
|
|
*value = (cf >> shift) & mask;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 * value)
|
|
{
|
|
if (bus->number > 0)
|
|
return pci_conf1_read_config(bus, devfn, where, size, value);
|
|
|
|
return pci_conf0_read_config(bus, devfn, where, size, value);
|
|
}
|
|
|
|
static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 value)
|
|
{
|
|
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
|
|
bridge_t *bridge = bc->base;
|
|
int slot = PCI_SLOT(devfn);
|
|
int fn = PCI_FUNC(devfn);
|
|
volatile void *addr;
|
|
u32 cf, shift, mask, smask;
|
|
int res;
|
|
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at it for real ...
|
|
*/
|
|
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
|
|
goto oh_my_gawd;
|
|
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
|
|
|
|
if (size == 1) {
|
|
res = put_dbe(value, (u8 *) addr);
|
|
} else if (size == 2) {
|
|
res = put_dbe(value, (u16 *) addr);
|
|
} else {
|
|
res = put_dbe(value, (u32 *) addr);
|
|
}
|
|
|
|
if (res)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
oh_my_gawd:
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to touch the wrong register.
|
|
*/
|
|
if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't try to access
|
|
* anything but 32-bit words ...
|
|
*/
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
|
|
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
shift = ((where & 3) << 3);
|
|
mask = (0xffffffffU >> ((4 - size) << 3));
|
|
smask = mask << shift;
|
|
|
|
cf = (cf & ~smask) | ((value & mask) << shift);
|
|
if (put_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 value)
|
|
{
|
|
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
|
|
bridge_t *bridge = bc->base;
|
|
int slot = PCI_SLOT(devfn);
|
|
int fn = PCI_FUNC(devfn);
|
|
int busno = bus->number;
|
|
volatile void *addr;
|
|
u32 cf, shift, mask, smask;
|
|
int res;
|
|
|
|
bridge->b_pci_cfg = (busno << 16) | (slot << 11);
|
|
addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to look at it for real ...
|
|
*/
|
|
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
|
|
goto oh_my_gawd;
|
|
|
|
addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
|
|
|
|
if (size == 1) {
|
|
res = put_dbe(value, (u8 *) addr);
|
|
} else if (size == 2) {
|
|
res = put_dbe(value, (u16 *) addr);
|
|
} else {
|
|
res = put_dbe(value, (u32 *) addr);
|
|
}
|
|
|
|
if (res)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
oh_my_gawd:
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't even give the
|
|
* generic PCI code a chance to touch the wrong register.
|
|
*/
|
|
if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
|
|
return PCIBIOS_SUCCESSFUL;
|
|
|
|
/*
|
|
* IOC3 is fucked fucked beyond believe ... Don't try to access
|
|
* anything but 32-bit words ...
|
|
*/
|
|
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
|
|
|
|
if (get_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
shift = ((where & 3) << 3);
|
|
mask = (0xffffffffU >> ((4 - size) << 3));
|
|
smask = mask << shift;
|
|
|
|
cf = (cf & ~smask) | ((value & mask) << shift);
|
|
if (put_dbe(cf, (u32 *) addr))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 value)
|
|
{
|
|
if (bus->number > 0)
|
|
return pci_conf1_write_config(bus, devfn, where, size, value);
|
|
|
|
return pci_conf0_write_config(bus, devfn, where, size, value);
|
|
}
|
|
|
|
struct pci_ops bridge_pci_ops = {
|
|
.read = pci_read_config,
|
|
.write = pci_write_config,
|
|
};
|