Akinobu Mita 8d0e8e7956 iio: adc: ti-ads1015: fix scale information for ADS1115 ... The ti-ads1015 driver supports ADS1015 and ADS1115 devices. The same scale information is used for both devices in this driver, however they have actually different values and the ADS1115's one is not correct. These devices have the same full-scale input voltage range for each PGA selection. So instead of adding another hardcoded scale information, compute a correct scale on demand from each device's resolution. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-08-20 15:41:12 +01:00
..
accel	iio: accel: bma180: constify i2c_device_id	2017-08-20 10:15:45 +01:00
adc	iio: adc: ti-ads1015: fix scale information for ADS1115	2017-08-20 15:41:12 +01:00
amplifiers
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	iio: chemical: ccs811: Add triggered buffer support	2017-08-18 08:08:02 +01:00
common	iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code	2017-07-01 10:16:56 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	iio: dac: stm32: add support for stm32f4	2017-07-15 12:26:26 +01:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi	2017-07-02 10:24:56 +01:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state()	2017-07-25 20:03:04 +01:00
imu	iio: adis16400: Change unsigned to unsigned int	2017-07-02 10:27:03 +01:00
light	iio: light: tsl2583: constify i2c_device_id	2017-08-20 10:17:23 +01:00
magnetometer	iio: magnetometer: ak8974: debug AMI306 calibration data	2017-08-20 15:41:11 +01:00
multiplexer	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
orientation	iio: orientation: hid-sensor-rotation: Drop unnecessary static	2017-07-17 21:45:01 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H	2017-08-12 13:46:32 +01:00
proximity	iio: srf08: add support for srf02 in i2c mode	2017-08-18 08:04:17 +01:00
temperature	iio: temperature: tsys01: Add OF match table	2017-07-01 10:16:42 +01:00
trigger	iio: trigger: stm32-timer: add output compare triggers	2017-08-12 13:05:27 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	First round of IIO new device support, features and cleanups for the 4.14 cycle.	2017-07-27 21:29:49 -07:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00