forked from Minki/linux
8c22a8f575
Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
283 lines
6.7 KiB
C
283 lines
6.7 KiB
C
/*
|
|
* ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
|
|
*
|
|
* Based on the ads7828 driver by Steve Hardy.
|
|
*
|
|
* Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/i2c/ads1015.h>
|
|
|
|
/* ADS1015 registers */
|
|
enum {
|
|
ADS1015_CONVERSION = 0,
|
|
ADS1015_CONFIG = 1,
|
|
};
|
|
|
|
/* PGA fullscale voltages in mV */
|
|
static const unsigned int fullscale_table[8] = {
|
|
6144, 4096, 2048, 1024, 512, 256, 256, 256 };
|
|
|
|
#define ADS1015_CONFIG_CHANNELS 8
|
|
#define ADS1015_DEFAULT_CHANNELS 0xff
|
|
|
|
struct ads1015_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock; /* mutex protect updates */
|
|
struct attribute *attr_table[ADS1015_CONFIG_CHANNELS + 1];
|
|
struct attribute_group attr_group;
|
|
};
|
|
|
|
static s32 ads1015_read_reg(struct i2c_client *client, unsigned int reg)
|
|
{
|
|
s32 data = i2c_smbus_read_word_data(client, reg);
|
|
|
|
return (data < 0) ? data : swab16(data);
|
|
}
|
|
|
|
static s32 ads1015_write_reg(struct i2c_client *client, unsigned int reg,
|
|
u16 val)
|
|
{
|
|
return i2c_smbus_write_word_data(client, reg, swab16(val));
|
|
}
|
|
|
|
static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
|
|
int *value)
|
|
{
|
|
u16 config;
|
|
s16 conversion;
|
|
unsigned int pga;
|
|
int fullscale;
|
|
unsigned int k;
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
int res;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* get fullscale voltage */
|
|
res = ads1015_read_reg(client, ADS1015_CONFIG);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
config = res;
|
|
pga = (config >> 9) & 0x0007;
|
|
fullscale = fullscale_table[pga];
|
|
|
|
/* set channel and start single conversion */
|
|
config &= ~(0x0007 << 12);
|
|
config |= (1 << 15) | (1 << 8) | (channel & 0x0007) << 12;
|
|
|
|
/* wait until conversion finished */
|
|
res = ads1015_write_reg(client, ADS1015_CONFIG, config);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
for (k = 0; k < 5; ++k) {
|
|
msleep(1);
|
|
res = ads1015_read_reg(client, ADS1015_CONFIG);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
config = res;
|
|
if (config & (1 << 15))
|
|
break;
|
|
}
|
|
if (k == 5) {
|
|
res = -EIO;
|
|
goto err_unlock;
|
|
}
|
|
|
|
res = ads1015_read_reg(client, ADS1015_CONVERSION);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
conversion = res;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
*value = DIV_ROUND_CLOSEST(conversion * fullscale, 0x7ff0);
|
|
|
|
return 0;
|
|
|
|
err_unlock:
|
|
mutex_unlock(&data->update_lock);
|
|
return res;
|
|
}
|
|
|
|
/* sysfs callback function */
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int in;
|
|
int res;
|
|
|
|
res = ads1015_read_value(client, attr->index, &in);
|
|
|
|
return (res < 0) ? res : sprintf(buf, "%d\n", in);
|
|
}
|
|
|
|
#define in_reg(offset)\
|
|
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
|
|
NULL, offset)
|
|
|
|
in_reg(0);
|
|
in_reg(1);
|
|
in_reg(2);
|
|
in_reg(3);
|
|
in_reg(4);
|
|
in_reg(5);
|
|
in_reg(6);
|
|
in_reg(7);
|
|
|
|
static struct attribute *all_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
};
|
|
|
|
/*
|
|
* Driver interface
|
|
*/
|
|
|
|
static int ads1015_remove(struct i2c_client *client)
|
|
{
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&client->dev.kobj, &data->attr_group);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ads1015_get_exported_channels(struct i2c_client *client)
|
|
{
|
|
struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
#ifdef CONFIG_OF
|
|
struct device_node *np = client->dev.of_node;
|
|
const __be32 *of_channels;
|
|
int of_channels_size;
|
|
#endif
|
|
|
|
/* prefer platform data */
|
|
if (pdata)
|
|
return pdata->exported_channels;
|
|
|
|
#ifdef CONFIG_OF
|
|
/* fallback on OF */
|
|
of_channels = of_get_property(np, "exported-channels",
|
|
&of_channels_size);
|
|
if (of_channels && (of_channels_size == sizeof(*of_channels)))
|
|
return be32_to_cpup(of_channels);
|
|
#endif
|
|
|
|
/* fallback on default configuration */
|
|
return ADS1015_DEFAULT_CHANNELS;
|
|
}
|
|
|
|
static int ads1015_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ads1015_data *data;
|
|
int err;
|
|
unsigned int exported_channels;
|
|
unsigned int k;
|
|
unsigned int n = 0;
|
|
|
|
data = kzalloc(sizeof(struct ads1015_data), GFP_KERNEL);
|
|
if (!data) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* build sysfs attribute group */
|
|
data->attr_group.attrs = data->attr_table;
|
|
exported_channels = ads1015_get_exported_channels(client);
|
|
for (k = 0; k < ADS1015_CONFIG_CHANNELS; ++k) {
|
|
if (!(exported_channels & (1<<k)))
|
|
continue;
|
|
data->attr_table[n++] = all_attributes[k];
|
|
}
|
|
err = sysfs_create_group(&client->dev.kobj, &data->attr_group);
|
|
if (err)
|
|
goto exit_free;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
sysfs_remove_group(&client->dev.kobj, &data->attr_group);
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static const struct i2c_device_id ads1015_id[] = {
|
|
{ "ads1015", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ads1015_id);
|
|
|
|
static struct i2c_driver ads1015_driver = {
|
|
.driver = {
|
|
.name = "ads1015",
|
|
},
|
|
.probe = ads1015_probe,
|
|
.remove = ads1015_remove,
|
|
.id_table = ads1015_id,
|
|
};
|
|
|
|
static int __init sensors_ads1015_init(void)
|
|
{
|
|
return i2c_add_driver(&ads1015_driver);
|
|
}
|
|
|
|
static void __exit sensors_ads1015_exit(void)
|
|
{
|
|
i2c_del_driver(&ads1015_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>");
|
|
MODULE_DESCRIPTION("ADS1015 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_ads1015_init);
|
|
module_exit(sensors_ads1015_exit);
|