leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8be964d236
linux/drivers/mfd/wm831x-irq.c
Mark Brown bc86fcee37 mfd: Continue with IRQ setup even if we don't have PMIC main IRQ 
The fact that we can't actually raise any interrupts doesn't stop us
setting up the IRQs we're exporting. While this isn't actually going
to do anything it allows us to proceed further through device setup
during board bringup and avoids issues with the MFD core not letting
us suppress the configuration of IRQ resources.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:19 +02:00

591 lines
13 KiB
C
Raw Blame History

/*
* wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/gpio.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/delay.h>
struct wm831x_irq_data {
int primary;
int reg;
int mask;
};
static struct wm831x_irq_data wm831x_irqs[] = {
[WM831X_IRQ_TEMP_THW] = {
.primary = WM831X_TEMP_INT,
.reg = 1,
.mask = WM831X_TEMP_THW_EINT,
},
[WM831X_IRQ_GPIO_1] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP1_EINT,
},
[WM831X_IRQ_GPIO_2] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP2_EINT,
},
[WM831X_IRQ_GPIO_3] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP3_EINT,
},
[WM831X_IRQ_GPIO_4] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP4_EINT,
},
[WM831X_IRQ_GPIO_5] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP5_EINT,
},
[WM831X_IRQ_GPIO_6] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP6_EINT,
},
[WM831X_IRQ_GPIO_7] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP7_EINT,
},
[WM831X_IRQ_GPIO_8] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP8_EINT,
},
[WM831X_IRQ_GPIO_9] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP9_EINT,
},
[WM831X_IRQ_GPIO_10] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP10_EINT,
},
[WM831X_IRQ_GPIO_11] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP11_EINT,
},
[WM831X_IRQ_GPIO_12] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP12_EINT,
},
[WM831X_IRQ_GPIO_13] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP13_EINT,
},
[WM831X_IRQ_GPIO_14] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP14_EINT,
},
[WM831X_IRQ_GPIO_15] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP15_EINT,
},
[WM831X_IRQ_GPIO_16] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP16_EINT,
},
[WM831X_IRQ_ON] = {
.primary = WM831X_ON_PIN_INT,
.reg = 1,
.mask = WM831X_ON_PIN_EINT,
},
[WM831X_IRQ_PPM_SYSLO] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_SYSLO_EINT,
},
[WM831X_IRQ_PPM_PWR_SRC] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_PWR_SRC_EINT,
},
[WM831X_IRQ_PPM_USB_CURR] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_USB_CURR_EINT,
},
[WM831X_IRQ_WDOG_TO] = {
.primary = WM831X_WDOG_INT,
.reg = 1,
.mask = WM831X_WDOG_TO_EINT,
},
[WM831X_IRQ_RTC_PER] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_PER_EINT,
},
[WM831X_IRQ_RTC_ALM] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_ALM_EINT,
},
[WM831X_IRQ_CHG_BATT_HOT] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_HOT_EINT,
},
[WM831X_IRQ_CHG_BATT_COLD] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_COLD_EINT,
},
[WM831X_IRQ_CHG_BATT_FAIL] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_FAIL_EINT,
},
[WM831X_IRQ_CHG_OV] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_OV_EINT,
},
[WM831X_IRQ_CHG_END] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_END_EINT,
},
[WM831X_IRQ_CHG_TO] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_TO_EINT,
},
[WM831X_IRQ_CHG_MODE] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_MODE_EINT,
},
[WM831X_IRQ_CHG_START] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_START_EINT,
},
[WM831X_IRQ_TCHDATA] = {
.primary = WM831X_TCHDATA_INT,
.reg = 1,
.mask = WM831X_TCHDATA_EINT,
},
[WM831X_IRQ_TCHPD] = {
.primary = WM831X_TCHPD_INT,
.reg = 1,
.mask = WM831X_TCHPD_EINT,
},
[WM831X_IRQ_AUXADC_DATA] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DATA_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP1] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP1_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP2] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP2_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP3] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP3_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP4] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP4_EINT,
},
[WM831X_IRQ_CS1] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS1_EINT,
},
[WM831X_IRQ_CS2] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS2_EINT,
},
[WM831X_IRQ_HC_DC1] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC1_EINT,
},
[WM831X_IRQ_HC_DC2] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC2_EINT,
},
[WM831X_IRQ_UV_LDO1] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO1_EINT,
},
[WM831X_IRQ_UV_LDO2] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO2_EINT,
},
[WM831X_IRQ_UV_LDO3] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO3_EINT,
},
[WM831X_IRQ_UV_LDO4] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO4_EINT,
},
[WM831X_IRQ_UV_LDO5] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO5_EINT,
},
[WM831X_IRQ_UV_LDO6] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO6_EINT,
},
[WM831X_IRQ_UV_LDO7] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO7_EINT,
},
[WM831X_IRQ_UV_LDO8] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO8_EINT,
},
[WM831X_IRQ_UV_LDO9] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO9_EINT,
},
[WM831X_IRQ_UV_LDO10] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO10_EINT,
},
[WM831X_IRQ_UV_DC1] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC1_EINT,
},
[WM831X_IRQ_UV_DC2] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC2_EINT,
},
[WM831X_IRQ_UV_DC3] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC3_EINT,
},
[WM831X_IRQ_UV_DC4] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC4_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
int irq)
{
return &wm831x_irqs[irq - wm831x->irq_base];
}
static void wm831x_irq_lock(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
mutex_lock(&wm831x->irq_lock);
}
static void wm831x_irq_sync_unlock(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int i;
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
dev_dbg(wm831x->dev, "IRQ mask sync: %x = %x\n",
WM831X_INTERRUPT_STATUS_1_MASK + i,
wm831x->irq_masks_cur[i]);
wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
wm831x_reg_write(wm831x,
WM831X_INTERRUPT_STATUS_1_MASK + i,
wm831x->irq_masks_cur[i]);
}
}
mutex_unlock(&wm831x->irq_lock);
}
static void wm831x_irq_enable(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
data->irq);
wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
static void wm831x_irq_disable(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
data->irq);
wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int val, irq;
irq = data->irq - wm831x->irq_base;
if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
/* Ignore internal-only IRQs */
if (irq >= 0 && irq < WM831X_NUM_IRQS)
return 0;
else
return -EINVAL;
}
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
val = WM831X_GPN_INT_MODE;
break;
case IRQ_TYPE_EDGE_RISING:
val = WM831X_GPN_POL;
break;
case IRQ_TYPE_EDGE_FALLING:
val = 0;
break;
default:
return -EINVAL;
}
return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + irq,
WM831X_GPN_INT_MODE | WM831X_GPN_POL, val);
}
static struct irq_chip wm831x_irq_chip = {
.name = "wm831x",
.irq_bus_lock = wm831x_irq_lock,
.irq_bus_sync_unlock = wm831x_irq_sync_unlock,
.irq_disable = wm831x_irq_disable,
.irq_enable = wm831x_irq_enable,
.irq_set_type = wm831x_irq_set_type,
};
/* The processing of the primary interrupt occurs in a thread so that
* we can interact with the device over I2C or SPI. */
static irqreturn_t wm831x_irq_thread(int irq, void *data)
{
struct wm831x *wm831x = data;
unsigned int i;
int primary;
int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
int read[WM831X_NUM_IRQ_REGS] = { 0 };
int *status;
primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
if (primary < 0) {
dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
primary);
goto out;
}
/* The touch interrupts are visible in the primary register as
* an optimisation; open code this to avoid complicating the
* main handling loop and so we can also skip iterating the
* descriptors.
*/
if (primary & WM831X_TCHPD_INT)
handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHPD);
if (primary & WM831X_TCHDATA_INT)
handle_nested_irq(wm831x->irq_base + WM831X_IRQ_TCHDATA);
if (primary & (WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT))
goto out;
for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
int offset = wm831x_irqs[i].reg - 1;
if (!(primary & wm831x_irqs[i].primary))
continue;
status = &status_regs[offset];
/* Hopefully there should only be one register to read
* each time otherwise we ought to do a block read. */
if (!read[offset]) {
*status = wm831x_reg_read(wm831x,
irq_data_to_status_reg(&wm831x_irqs[i]));
if (*status < 0) {
dev_err(wm831x->dev,
"Failed to read IRQ status: %d\n",
*status);
goto out;
}
read[offset] = 1;
}
/* Report it if it isn't masked, or forget the status. */
if ((*status & ~wm831x->irq_masks_cur[offset])
& wm831x_irqs[i].mask)
handle_nested_irq(wm831x->irq_base + i);
else
*status &= ~wm831x_irqs[i].mask;
}
out:
/* Touchscreen interrupts are handled specially in the driver */
status_regs[0] &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT);
for (i = 0; i < ARRAY_SIZE(status_regs); i++) {
if (status_regs[i])
wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i,
status_regs[i]);
}
return IRQ_HANDLED;
}
int wm831x_irq_init(struct wm831x *wm831x, int irq)
{
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int i, cur_irq, ret;
mutex_init(&wm831x->irq_lock);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
wm831x->irq_masks_cur[i] = 0xffff;
wm831x->irq_masks_cache[i] = 0xffff;
wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
if (!pdata || !pdata->irq_base) {
dev_err(wm831x->dev,
"No interrupt base specified, no interrupts\n");
return 0;
}
if (pdata->irq_cmos)
i = 0;
else
i = WM831X_IRQ_OD;
wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
WM831X_IRQ_OD, i);
/* Try to flag /IRQ as a wake source; there are a number of
* unconditional wake sources in the PMIC so this isn't
* conditional but we don't actually care *too* much if it
* fails.
*/
ret = enable_irq_wake(irq);
if (ret != 0) {
dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n",
ret);
}
wm831x->irq = irq;
wm831x->irq_base = pdata->irq_base;
/* Register them with genirq */
for (cur_irq = wm831x->irq_base;
cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
cur_irq++) {
irq_set_chip_data(cur_irq, wm831x);
irq_set_chip_and_handler(cur_irq, &wm831x_irq_chip,
handle_edge_irq);
irq_set_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
irq_set_noprobe(cur_irq);
#endif
}
if (irq) {
ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"wm831x", wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
irq, ret);
return ret;
}
} else {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
}
/* Enable top level interrupts, we mask at secondary level */
wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
return 0;
}
void wm831x_irq_exit(struct wm831x *wm831x)
{
if (wm831x->irq)
free_irq(wm831x->irq, wm831x);
}
Reference in New Issue View Git Blame Copy Permalink