forked from Minki/linux
4f0234f4f9
Only adding cpus is supports at the moment, removal will come next. When new cpus are configured, the machine description is updated. When we get the configure request we pass in a cpu mask of to-be-added cpus to the mdesc CPU node parser so it only fetches information for those cpus. That code also proceeds to update the SMT/multi-core scheduling bitmaps. cpu_up() does all the work and we return the status back over the DS channel. CPUs via dr-cpu need to be booted straight out of the hypervisor, and this requires: 1) A new trampoline mechanism. CPUs are booted straight out of the hypervisor with MMU disabled and running in physical addresses with no mappings installed in the TLB. The new hvtramp.S code sets up the critical cpu state, installs the locked TLB mappings for the kernel, and turns the MMU on. It then proceeds to follow the logic of the existing trampoline.S SMP cpu bringup code. 2) All calls into OBP have to be disallowed when domaining is enabled. Since cpus boot straight into the kernel from the hypervisor, OBP has no state about that cpu and therefore cannot handle being invoked on that cpu. Luckily it's only a handful of interfaces which can be called after the OBP device tree is obtained. For example, rebooting, halting, powering-off, and setting options node variables. CPU removal support will require some infrastructure changes here. Namely we'll have to process the requests via a true kernel thread instead of in a workqueue. workqueues run on a per-cpu thread, but when unconfiguring we might need to force the thread to execute on another cpu if the current cpu is the one being removed. Removal of a cpu also causes the kernel to destroy that cpu's workqueue running thread. Another issue on removal is that we may have interrupts still pointing to the cpu-to-be-removed. So new code will be needed to walk the active INO list and retarget those cpus as-needed. Signed-off-by: David S. Miller <davem@davemloft.net>
361 lines
8.1 KiB
C
361 lines
8.1 KiB
C
/* $Id: misc.c,v 1.20 2001/09/21 03:17:07 kanoj Exp $
|
|
* misc.c: Miscellaneous prom functions that don't belong
|
|
* anywhere else.
|
|
*
|
|
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
|
|
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/openprom.h>
|
|
#include <asm/oplib.h>
|
|
#include <asm/system.h>
|
|
#include <asm/ldc.h>
|
|
|
|
int prom_service_exists(const char *service_name)
|
|
{
|
|
int err = p1275_cmd("test", P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_INOUT(1, 1), service_name);
|
|
|
|
if (err)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
void prom_sun4v_guest_soft_state(void)
|
|
{
|
|
const char *svc = "SUNW,soft-state-supported";
|
|
|
|
if (!prom_service_exists(svc))
|
|
return;
|
|
p1275_cmd(svc, P1275_INOUT(0, 0));
|
|
}
|
|
|
|
/* Reset and reboot the machine with the command 'bcommand'. */
|
|
void prom_reboot(const char *bcommand)
|
|
{
|
|
#ifdef CONFIG_SUN_LDOMS
|
|
if (ldom_domaining_enabled)
|
|
ldom_reboot(bcommand);
|
|
#endif
|
|
p1275_cmd("boot", P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_INOUT(1, 0), bcommand);
|
|
}
|
|
|
|
/* Forth evaluate the expression contained in 'fstring'. */
|
|
void prom_feval(const char *fstring)
|
|
{
|
|
if (!fstring || fstring[0] == 0)
|
|
return;
|
|
p1275_cmd("interpret", P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_INOUT(1, 1), fstring);
|
|
}
|
|
|
|
/* We want to do this more nicely some day. */
|
|
extern void (*prom_palette)(int);
|
|
|
|
#ifdef CONFIG_SMP
|
|
extern void smp_capture(void);
|
|
extern void smp_release(void);
|
|
#endif
|
|
|
|
/* Drop into the prom, with the chance to continue with the 'go'
|
|
* prom command.
|
|
*/
|
|
void prom_cmdline(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (!serial_console && prom_palette)
|
|
prom_palette(1);
|
|
|
|
#ifdef CONFIG_SMP
|
|
smp_capture();
|
|
#endif
|
|
|
|
p1275_cmd("enter", P1275_INOUT(0, 0));
|
|
|
|
#ifdef CONFIG_SMP
|
|
smp_release();
|
|
#endif
|
|
|
|
if (!serial_console && prom_palette)
|
|
prom_palette(0);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/* Drop into the prom, but completely terminate the program.
|
|
* No chance of continuing.
|
|
*/
|
|
void prom_halt(void)
|
|
{
|
|
#ifdef CONFIG_SUN_LDOMS
|
|
if (ldom_domaining_enabled)
|
|
ldom_power_off();
|
|
#endif
|
|
again:
|
|
p1275_cmd("exit", P1275_INOUT(0, 0));
|
|
goto again; /* PROM is out to get me -DaveM */
|
|
}
|
|
|
|
void prom_halt_power_off(void)
|
|
{
|
|
#ifdef CONFIG_SUN_LDOMS
|
|
if (ldom_domaining_enabled)
|
|
ldom_power_off();
|
|
#endif
|
|
p1275_cmd("SUNW,power-off", P1275_INOUT(0, 0));
|
|
|
|
/* if nothing else helps, we just halt */
|
|
prom_halt();
|
|
}
|
|
|
|
/* Set prom sync handler to call function 'funcp'. */
|
|
void prom_setcallback(callback_func_t funcp)
|
|
{
|
|
if (!funcp)
|
|
return;
|
|
p1275_cmd("set-callback", P1275_ARG(0, P1275_ARG_IN_FUNCTION) |
|
|
P1275_INOUT(1, 1), funcp);
|
|
}
|
|
|
|
/* Get the idprom and stuff it into buffer 'idbuf'. Returns the
|
|
* format type. 'num_bytes' is the number of bytes that your idbuf
|
|
* has space for. Returns 0xff on error.
|
|
*/
|
|
unsigned char prom_get_idprom(char *idbuf, int num_bytes)
|
|
{
|
|
int len;
|
|
|
|
len = prom_getproplen(prom_root_node, "idprom");
|
|
if ((len >num_bytes) || (len == -1))
|
|
return 0xff;
|
|
if (!prom_getproperty(prom_root_node, "idprom", idbuf, num_bytes))
|
|
return idbuf[0];
|
|
|
|
return 0xff;
|
|
}
|
|
|
|
/* Install Linux trap table so PROM uses that instead of its own. */
|
|
void prom_set_trap_table(unsigned long tba)
|
|
{
|
|
p1275_cmd("SUNW,set-trap-table",
|
|
(P1275_ARG(0, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(1, 0)), tba);
|
|
}
|
|
|
|
void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa)
|
|
{
|
|
p1275_cmd("SUNW,set-trap-table",
|
|
(P1275_ARG(0, P1275_ARG_IN_64B) |
|
|
P1275_ARG(1, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(2, 0)), tba, mmfsa);
|
|
}
|
|
|
|
int prom_get_mmu_ihandle(void)
|
|
{
|
|
int node, ret;
|
|
|
|
if (prom_mmu_ihandle_cache != 0)
|
|
return prom_mmu_ihandle_cache;
|
|
|
|
node = prom_finddevice(prom_chosen_path);
|
|
ret = prom_getint(node, prom_mmu_name);
|
|
if (ret == -1 || ret == 0)
|
|
prom_mmu_ihandle_cache = -1;
|
|
else
|
|
prom_mmu_ihandle_cache = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int prom_get_memory_ihandle(void)
|
|
{
|
|
static int memory_ihandle_cache;
|
|
int node, ret;
|
|
|
|
if (memory_ihandle_cache != 0)
|
|
return memory_ihandle_cache;
|
|
|
|
node = prom_finddevice("/chosen");
|
|
ret = prom_getint(node, "memory");
|
|
if (ret == -1 || ret == 0)
|
|
memory_ihandle_cache = -1;
|
|
else
|
|
memory_ihandle_cache = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Load explicit I/D TLB entries. */
|
|
long prom_itlb_load(unsigned long index,
|
|
unsigned long tte_data,
|
|
unsigned long vaddr)
|
|
{
|
|
return p1275_cmd(prom_callmethod_name,
|
|
(P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_ARG(2, P1275_ARG_IN_64B) |
|
|
P1275_ARG(3, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(5, 1)),
|
|
"SUNW,itlb-load",
|
|
prom_get_mmu_ihandle(),
|
|
/* And then our actual args are pushed backwards. */
|
|
vaddr,
|
|
tte_data,
|
|
index);
|
|
}
|
|
|
|
long prom_dtlb_load(unsigned long index,
|
|
unsigned long tte_data,
|
|
unsigned long vaddr)
|
|
{
|
|
return p1275_cmd(prom_callmethod_name,
|
|
(P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_ARG(2, P1275_ARG_IN_64B) |
|
|
P1275_ARG(3, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(5, 1)),
|
|
"SUNW,dtlb-load",
|
|
prom_get_mmu_ihandle(),
|
|
/* And then our actual args are pushed backwards. */
|
|
vaddr,
|
|
tte_data,
|
|
index);
|
|
}
|
|
|
|
int prom_map(int mode, unsigned long size,
|
|
unsigned long vaddr, unsigned long paddr)
|
|
{
|
|
int ret = p1275_cmd(prom_callmethod_name,
|
|
(P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_ARG(3, P1275_ARG_IN_64B) |
|
|
P1275_ARG(4, P1275_ARG_IN_64B) |
|
|
P1275_ARG(6, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(7, 1)),
|
|
prom_map_name,
|
|
prom_get_mmu_ihandle(),
|
|
mode,
|
|
size,
|
|
vaddr,
|
|
0,
|
|
paddr);
|
|
|
|
if (ret == 0)
|
|
ret = -1;
|
|
return ret;
|
|
}
|
|
|
|
void prom_unmap(unsigned long size, unsigned long vaddr)
|
|
{
|
|
p1275_cmd(prom_callmethod_name,
|
|
(P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_ARG(2, P1275_ARG_IN_64B) |
|
|
P1275_ARG(3, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(4, 0)),
|
|
prom_unmap_name,
|
|
prom_get_mmu_ihandle(),
|
|
size,
|
|
vaddr);
|
|
}
|
|
|
|
/* Set aside physical memory which is not touched or modified
|
|
* across soft resets.
|
|
*/
|
|
unsigned long prom_retain(const char *name,
|
|
unsigned long pa_low, unsigned long pa_high,
|
|
long size, long align)
|
|
{
|
|
/* XXX I don't think we return multiple values correctly.
|
|
* XXX OBP supposedly returns pa_low/pa_high here, how does
|
|
* XXX it work?
|
|
*/
|
|
|
|
/* If align is zero, the pa_low/pa_high args are passed,
|
|
* else they are not.
|
|
*/
|
|
if (align == 0)
|
|
return p1275_cmd("SUNW,retain",
|
|
(P1275_ARG(0, P1275_ARG_IN_BUF) | P1275_INOUT(5, 2)),
|
|
name, pa_low, pa_high, size, align);
|
|
else
|
|
return p1275_cmd("SUNW,retain",
|
|
(P1275_ARG(0, P1275_ARG_IN_BUF) | P1275_INOUT(3, 2)),
|
|
name, size, align);
|
|
}
|
|
|
|
/* Get "Unumber" string for the SIMM at the given
|
|
* memory address. Usually this will be of the form
|
|
* "Uxxxx" where xxxx is a decimal number which is
|
|
* etched into the motherboard next to the SIMM slot
|
|
* in question.
|
|
*/
|
|
int prom_getunumber(int syndrome_code,
|
|
unsigned long phys_addr,
|
|
char *buf, int buflen)
|
|
{
|
|
return p1275_cmd(prom_callmethod_name,
|
|
(P1275_ARG(0, P1275_ARG_IN_STRING) |
|
|
P1275_ARG(3, P1275_ARG_OUT_BUF) |
|
|
P1275_ARG(6, P1275_ARG_IN_64B) |
|
|
P1275_INOUT(8, 2)),
|
|
"SUNW,get-unumber", prom_get_memory_ihandle(),
|
|
buflen, buf, P1275_SIZE(buflen),
|
|
0, phys_addr, syndrome_code);
|
|
}
|
|
|
|
/* Power management extensions. */
|
|
void prom_sleepself(void)
|
|
{
|
|
p1275_cmd("SUNW,sleep-self", P1275_INOUT(0, 0));
|
|
}
|
|
|
|
int prom_sleepsystem(void)
|
|
{
|
|
return p1275_cmd("SUNW,sleep-system", P1275_INOUT(0, 1));
|
|
}
|
|
|
|
int prom_wakeupsystem(void)
|
|
{
|
|
return p1275_cmd("SUNW,wakeup-system", P1275_INOUT(0, 1));
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg)
|
|
{
|
|
p1275_cmd("SUNW,start-cpu", P1275_INOUT(3, 0), cpunode, pc, arg);
|
|
}
|
|
|
|
void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg)
|
|
{
|
|
p1275_cmd("SUNW,start-cpu-by-cpuid", P1275_INOUT(3, 0),
|
|
cpuid, pc, arg);
|
|
}
|
|
|
|
void prom_stopcpu_cpuid(int cpuid)
|
|
{
|
|
p1275_cmd("SUNW,stop-cpu-by-cpuid", P1275_INOUT(1, 0),
|
|
cpuid);
|
|
}
|
|
|
|
void prom_stopself(void)
|
|
{
|
|
p1275_cmd("SUNW,stop-self", P1275_INOUT(0, 0));
|
|
}
|
|
|
|
void prom_idleself(void)
|
|
{
|
|
p1275_cmd("SUNW,idle-self", P1275_INOUT(0, 0));
|
|
}
|
|
|
|
void prom_resumecpu(int cpunode)
|
|
{
|
|
p1275_cmd("SUNW,resume-cpu", P1275_INOUT(1, 0), cpunode);
|
|
}
|
|
#endif
|