88c1e9404f
The OCMEM driver handles allocation and configuration of the On Chip MEMory that is present on some Snapdragon SoCs. Devices which have OCMEM do not have GMEM inside the GPU core, so the GPU must instead use OCMEM to be functional. Since the GPU is currently the only OCMEM user with an upstream driver, this is just a minimal implementation sufficient for statically allocating to the GPU it's chunk of OCMEM. This driver currently does not read the gmu-sram node that is described in the device tree bindings. The starting memory address of the GPU's reserved memory region is hardcoded to zero to match what the hardware expects. The driver can be updated to read the reserved memory regions from device tree once other users of OCMEM are added upstream. Signed-off-by: Brian Masney <masneyb@onstation.org> Co-developed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Gabriel Francisco <frc.gabrielgmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
214 lines
6.9 KiB
Plaintext
214 lines
6.9 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# QCOM Soc drivers
|
|
#
|
|
menu "Qualcomm SoC drivers"
|
|
|
|
config QCOM_AOSS_QMP
|
|
tristate "Qualcomm AOSS Driver"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on MAILBOX
|
|
depends on COMMON_CLK && PM
|
|
select PM_GENERIC_DOMAINS
|
|
help
|
|
This driver provides the means of communicating with and controlling
|
|
the low-power state for resources related to the remoteproc
|
|
subsystems as well as controlling the debug clocks exposed by the Always On
|
|
Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
|
|
|
|
config QCOM_COMMAND_DB
|
|
bool "Qualcomm Command DB"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on OF_RESERVED_MEM
|
|
help
|
|
Command DB queries shared memory by key string for shared system
|
|
resources. Platform drivers that require to set state of a shared
|
|
resource on a RPM-hardened platform must use this database to get
|
|
SoC specific identifier and information for the shared resources.
|
|
|
|
config QCOM_GENI_SE
|
|
tristate "QCOM GENI Serial Engine Driver"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
help
|
|
This driver is used to manage Generic Interface (GENI) firmware based
|
|
Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
|
|
driver is also used to manage the common aspects of multiple Serial
|
|
Engines present in the QUP.
|
|
|
|
config QCOM_GLINK_SSR
|
|
tristate "Qualcomm Glink SSR driver"
|
|
depends on RPMSG
|
|
depends on QCOM_RPROC_COMMON
|
|
help
|
|
Say y here to enable GLINK SSR support. The GLINK SSR driver
|
|
implements the SSR protocol for notifying the remote processor about
|
|
neighboring subsystems going up or down.
|
|
|
|
config QCOM_GSBI
|
|
tristate "QCOM General Serial Bus Interface"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
select MFD_SYSCON
|
|
help
|
|
Say y here to enable GSBI support. The GSBI provides control
|
|
functions for connecting the underlying serial UART, SPI, and I2C
|
|
devices to the output pins.
|
|
|
|
config QCOM_LLCC
|
|
tristate "Qualcomm Technologies, Inc. LLCC driver"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
help
|
|
Qualcomm Technologies, Inc. platform specific
|
|
Last Level Cache Controller(LLCC) driver. This provides interfaces
|
|
to clients that use the LLCC. Say yes here to enable LLCC slice
|
|
driver.
|
|
|
|
config QCOM_SDM845_LLCC
|
|
tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
|
|
depends on QCOM_LLCC
|
|
help
|
|
Say yes here to enable the LLCC driver for SDM845. This provides
|
|
data required to configure LLCC so that clients can start using the
|
|
LLCC slices.
|
|
|
|
config QCOM_MDT_LOADER
|
|
tristate
|
|
select QCOM_SCM
|
|
|
|
config QCOM_OCMEM
|
|
tristate "Qualcomm On Chip Memory (OCMEM) driver"
|
|
depends on ARCH_QCOM
|
|
select QCOM_SCM
|
|
help
|
|
The On Chip Memory (OCMEM) allocator allows various clients to
|
|
allocate memory from OCMEM based on performance, latency and power
|
|
requirements. This is typically used by the GPU, camera/video, and
|
|
audio components on some Snapdragon SoCs.
|
|
|
|
config QCOM_PM
|
|
bool "Qualcomm Power Management"
|
|
depends on ARCH_QCOM && !ARM64
|
|
select ARM_CPU_SUSPEND
|
|
select QCOM_SCM
|
|
help
|
|
QCOM Platform specific power driver to manage cores and L2 low power
|
|
modes. It interface with various system drivers to put the cores in
|
|
low power modes.
|
|
|
|
config QCOM_QMI_HELPERS
|
|
tristate
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on NET
|
|
|
|
config QCOM_RMTFS_MEM
|
|
tristate "Qualcomm Remote Filesystem memory driver"
|
|
depends on ARCH_QCOM
|
|
select QCOM_SCM
|
|
help
|
|
The Qualcomm remote filesystem memory driver is used for allocating
|
|
and exposing regions of shared memory with remote processors for the
|
|
purpose of exchanging sector-data between the remote filesystem
|
|
service and its clients.
|
|
|
|
Say y here if you intend to boot the modem remoteproc.
|
|
|
|
config QCOM_RPMH
|
|
bool "Qualcomm RPM-Hardened (RPMH) Communication"
|
|
depends on ARCH_QCOM && ARM64 || COMPILE_TEST
|
|
help
|
|
Support for communication with the hardened-RPM blocks in
|
|
Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
|
|
internal bus to transmit state requests for shared resources. A set
|
|
of hardware components aggregate requests for these resources and
|
|
help apply the aggregated state on the resource.
|
|
|
|
config QCOM_RPMHPD
|
|
bool "Qualcomm RPMh Power domain driver"
|
|
depends on QCOM_RPMH && QCOM_COMMAND_DB
|
|
help
|
|
QCOM RPMh Power domain driver to support power-domains with
|
|
performance states. The driver communicates a performance state
|
|
value to RPMh which then translates it into corresponding voltage
|
|
for the voltage rail.
|
|
|
|
config QCOM_RPMPD
|
|
bool "Qualcomm RPM Power domain driver"
|
|
depends on QCOM_SMD_RPM=y
|
|
help
|
|
QCOM RPM Power domain driver to support power-domains with
|
|
performance states. The driver communicates a performance state
|
|
value to RPM which then translates it into corresponding voltage
|
|
for the voltage rail.
|
|
|
|
config QCOM_SMEM
|
|
tristate "Qualcomm Shared Memory Manager (SMEM)"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on HWSPINLOCK
|
|
help
|
|
Say y here to enable support for the Qualcomm Shared Memory Manager.
|
|
The driver provides an interface to items in a heap shared among all
|
|
processors in a Qualcomm platform.
|
|
|
|
config QCOM_SMD_RPM
|
|
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on RPMSG
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Resource Power Manager system found in the Qualcomm 8974 based
|
|
devices.
|
|
|
|
This is required to access many regulators, clocks and bus
|
|
frequencies controlled by the RPM on these devices.
|
|
|
|
Say M here if you want to include support for the Qualcomm RPM as a
|
|
module. This will build a module called "qcom-smd-rpm".
|
|
|
|
config QCOM_SMEM_STATE
|
|
bool
|
|
|
|
config QCOM_SMP2P
|
|
tristate "Qualcomm Shared Memory Point to Point support"
|
|
depends on MAILBOX
|
|
depends on QCOM_SMEM
|
|
select QCOM_SMEM_STATE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to support the Qualcomm Shared Memory Point to Point
|
|
protocol.
|
|
|
|
config QCOM_SMSM
|
|
tristate "Qualcomm Shared Memory State Machine"
|
|
depends on QCOM_SMEM
|
|
select QCOM_SMEM_STATE
|
|
select IRQ_DOMAIN
|
|
help
|
|
Say yes here to support the Qualcomm Shared Memory State Machine.
|
|
The state machine is represented by bits in shared memory.
|
|
|
|
config QCOM_SOCINFO
|
|
tristate "Qualcomm socinfo driver"
|
|
depends on QCOM_SMEM
|
|
select SOC_BUS
|
|
help
|
|
Say yes here to support the Qualcomm socinfo driver, providing
|
|
information about the SoC to user space.
|
|
|
|
config QCOM_WCNSS_CTRL
|
|
tristate "Qualcomm WCNSS control driver"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on RPMSG
|
|
help
|
|
Client driver for the WCNSS_CTRL SMD channel, used to download nv
|
|
firmware to a newly booted WCNSS chip.
|
|
|
|
config QCOM_APR
|
|
tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
|
depends on RPMSG
|
|
help
|
|
Enable APR IPC protocol support between
|
|
application processor and QDSP6. APR is
|
|
used by audio driver to configure QDSP6
|
|
ASM, ADM and AFE modules.
|
|
endmenu
|