forked from Minki/linux
57991ebaf9
Add a driver for the USB2.0 PHY found on the IMG Pistachio SoC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hartley <james.hartley@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9728/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
207 lines
5.2 KiB
C
207 lines
5.2 KiB
C
/*
|
|
* IMG Pistachio USB PHY driver
|
|
*
|
|
* Copyright (C) 2015 Google, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <dt-bindings/phy/phy-pistachio-usb.h>
|
|
|
|
#define USB_PHY_CONTROL1 0x04
|
|
#define USB_PHY_CONTROL1_FSEL_SHIFT 2
|
|
#define USB_PHY_CONTROL1_FSEL_MASK 0x7
|
|
|
|
#define USB_PHY_STRAP_CONTROL 0x10
|
|
#define USB_PHY_STRAP_CONTROL_REFCLK_SHIFT 4
|
|
#define USB_PHY_STRAP_CONTROL_REFCLK_MASK 0x3
|
|
|
|
#define USB_PHY_STATUS 0x14
|
|
#define USB_PHY_STATUS_RX_PHY_CLK BIT(9)
|
|
#define USB_PHY_STATUS_RX_UTMI_CLK BIT(8)
|
|
#define USB_PHY_STATUS_VBUS_FAULT BIT(7)
|
|
|
|
struct pistachio_usb_phy {
|
|
struct device *dev;
|
|
struct regmap *cr_top;
|
|
struct clk *phy_clk;
|
|
unsigned int refclk;
|
|
};
|
|
|
|
static const unsigned long fsel_rate_map[] = {
|
|
9600000,
|
|
10000000,
|
|
12000000,
|
|
19200000,
|
|
20000000,
|
|
24000000,
|
|
0,
|
|
50000000,
|
|
};
|
|
|
|
static int pistachio_usb_phy_power_on(struct phy *phy)
|
|
{
|
|
struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy);
|
|
unsigned long timeout, rate;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(p_phy->phy_clk);
|
|
if (ret < 0) {
|
|
dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regmap_update_bits(p_phy->cr_top, USB_PHY_STRAP_CONTROL,
|
|
USB_PHY_STRAP_CONTROL_REFCLK_MASK <<
|
|
USB_PHY_STRAP_CONTROL_REFCLK_SHIFT,
|
|
p_phy->refclk << USB_PHY_STRAP_CONTROL_REFCLK_SHIFT);
|
|
|
|
rate = clk_get_rate(p_phy->phy_clk);
|
|
if (p_phy->refclk == REFCLK_XO_CRYSTAL && rate != 12000000) {
|
|
dev_err(p_phy->dev, "Unsupported rate for XO crystal: %ld\n",
|
|
rate);
|
|
ret = -EINVAL;
|
|
goto disable_clk;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(fsel_rate_map); i++) {
|
|
if (rate == fsel_rate_map[i])
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(fsel_rate_map)) {
|
|
dev_err(p_phy->dev, "Unsupported clock rate: %lu\n", rate);
|
|
ret = -EINVAL;
|
|
goto disable_clk;
|
|
}
|
|
|
|
regmap_update_bits(p_phy->cr_top, USB_PHY_CONTROL1,
|
|
USB_PHY_CONTROL1_FSEL_MASK <<
|
|
USB_PHY_CONTROL1_FSEL_SHIFT,
|
|
i << USB_PHY_CONTROL1_FSEL_SHIFT);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(200);
|
|
while (time_before(jiffies, timeout)) {
|
|
unsigned int val;
|
|
|
|
regmap_read(p_phy->cr_top, USB_PHY_STATUS, &val);
|
|
if (val & USB_PHY_STATUS_VBUS_FAULT) {
|
|
dev_err(p_phy->dev, "VBUS fault detected\n");
|
|
ret = -EIO;
|
|
goto disable_clk;
|
|
}
|
|
if ((val & USB_PHY_STATUS_RX_PHY_CLK) &&
|
|
(val & USB_PHY_STATUS_RX_UTMI_CLK))
|
|
return 0;
|
|
usleep_range(1000, 1500);
|
|
}
|
|
|
|
dev_err(p_phy->dev, "Timed out waiting for PHY to power on\n");
|
|
ret = -ETIMEDOUT;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(p_phy->phy_clk);
|
|
return ret;
|
|
}
|
|
|
|
static int pistachio_usb_phy_power_off(struct phy *phy)
|
|
{
|
|
struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy);
|
|
|
|
clk_disable_unprepare(p_phy->phy_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops pistachio_usb_phy_ops = {
|
|
.power_on = pistachio_usb_phy_power_on,
|
|
.power_off = pistachio_usb_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int pistachio_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct pistachio_usb_phy *p_phy;
|
|
struct phy_provider *provider;
|
|
struct phy *phy;
|
|
int ret;
|
|
|
|
p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
|
|
if (!p_phy)
|
|
return -ENOMEM;
|
|
p_phy->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, p_phy);
|
|
|
|
p_phy->cr_top = syscon_regmap_lookup_by_phandle(p_phy->dev->of_node,
|
|
"img,cr-top");
|
|
if (IS_ERR(p_phy->cr_top)) {
|
|
dev_err(p_phy->dev, "Failed to get CR_TOP registers: %ld\n",
|
|
PTR_ERR(p_phy->cr_top));
|
|
return PTR_ERR(p_phy->cr_top);
|
|
}
|
|
|
|
p_phy->phy_clk = devm_clk_get(p_phy->dev, "usb_phy");
|
|
if (IS_ERR(p_phy->phy_clk)) {
|
|
dev_err(p_phy->dev, "Failed to get usb_phy clock: %ld\n",
|
|
PTR_ERR(p_phy->phy_clk));
|
|
return PTR_ERR(p_phy->phy_clk);
|
|
}
|
|
|
|
ret = of_property_read_u32(p_phy->dev->of_node, "img,refclk",
|
|
&p_phy->refclk);
|
|
if (ret < 0) {
|
|
dev_err(p_phy->dev, "No reference clock selector specified\n");
|
|
return ret;
|
|
}
|
|
|
|
phy = devm_phy_create(p_phy->dev, NULL, &pistachio_usb_phy_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(p_phy->dev, "Failed to create PHY: %ld\n",
|
|
PTR_ERR(phy));
|
|
return PTR_ERR(phy);
|
|
}
|
|
phy_set_drvdata(phy, p_phy);
|
|
|
|
provider = devm_of_phy_provider_register(p_phy->dev,
|
|
of_phy_simple_xlate);
|
|
if (IS_ERR(provider)) {
|
|
dev_err(p_phy->dev, "Failed to register PHY provider: %ld\n",
|
|
PTR_ERR(provider));
|
|
return PTR_ERR(provider);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id pistachio_usb_phy_of_match[] = {
|
|
{ .compatible = "img,pistachio-usb-phy", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pistachio_usb_phy_of_match);
|
|
|
|
static struct platform_driver pistachio_usb_phy_driver = {
|
|
.probe = pistachio_usb_phy_probe,
|
|
.driver = {
|
|
.name = "pistachio-usb-phy",
|
|
.of_match_table = pistachio_usb_phy_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(pistachio_usb_phy_driver);
|
|
|
|
MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
|
|
MODULE_DESCRIPTION("IMG Pistachio USB2.0 PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|