forked from Minki/linux
bd4abc2f96
Current code uses num_phys settings to tell the number of entries in phys. Thus remove the NULL terminating entry from phys array which is not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
261 lines
7.0 KiB
C
261 lines
7.0 KiB
C
/*
|
|
* Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Author: Kamil Debski <k.debski@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include "phy-samsung-usb2.h"
|
|
|
|
/* Exynos USB PHY registers */
|
|
|
|
/* PHY power control */
|
|
#define EXYNOS_4210_UPHYPWR 0x0
|
|
|
|
#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0)
|
|
#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3)
|
|
#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4)
|
|
#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5)
|
|
#define EXYNOS_4210_UPHYPWR_PHY0 ( \
|
|
EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \
|
|
EXYNOS_4210_UPHYPWR_PHY0_PWR | \
|
|
EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \
|
|
EXYNOS_4210_UPHYPWR_PHY0_SLEEP)
|
|
|
|
#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6)
|
|
#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7)
|
|
#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8)
|
|
#define EXYNOS_4210_UPHYPWR_PHY1 ( \
|
|
EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \
|
|
EXYNOS_4210_UPHYPWR_PHY1_PWR | \
|
|
EXYNOS_4210_UPHYPWR_PHY1_SLEEP)
|
|
|
|
#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9)
|
|
#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10)
|
|
#define EXYNOS_4210_UPHYPWR_HSIC0 ( \
|
|
EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \
|
|
EXYNOS_4210_UPHYPWR_HSIC0_SLEEP)
|
|
|
|
#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11)
|
|
#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12)
|
|
#define EXYNOS_4210_UPHYPWR_HSIC1 ( \
|
|
EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \
|
|
EXYNOS_4210_UPHYPWR_HSIC1_SLEEP)
|
|
|
|
/* PHY clock control */
|
|
#define EXYNOS_4210_UPHYCLK 0x4
|
|
|
|
#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
|
|
#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0
|
|
#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
|
|
#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
|
|
#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
|
|
|
|
#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
|
|
#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4)
|
|
#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7)
|
|
|
|
/* PHY reset control */
|
|
#define EXYNOS_4210_UPHYRST 0x8
|
|
|
|
#define EXYNOS_4210_URSTCON_PHY0 BIT(0)
|
|
#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1)
|
|
#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2)
|
|
#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3)
|
|
#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4)
|
|
#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5)
|
|
#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6)
|
|
#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7)
|
|
#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8)
|
|
#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9)
|
|
|
|
/* Isolation, configured in the power management unit */
|
|
#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704
|
|
#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0)
|
|
#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708
|
|
#define EXYNOS_4210_USB_ISOL_HOST BIT(0)
|
|
|
|
/* USBYPHY1 Floating prevention */
|
|
#define EXYNOS_4210_UPHY1CON 0x34
|
|
#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1
|
|
|
|
/* Mode switching SUB Device <-> Host */
|
|
#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c
|
|
#define EXYNOS_4210_MODE_SWITCH_MASK 1
|
|
#define EXYNOS_4210_MODE_SWITCH_DEVICE 0
|
|
#define EXYNOS_4210_MODE_SWITCH_HOST 1
|
|
|
|
enum exynos4210_phy_id {
|
|
EXYNOS4210_DEVICE,
|
|
EXYNOS4210_HOST,
|
|
EXYNOS4210_HSIC0,
|
|
EXYNOS4210_HSIC1,
|
|
EXYNOS4210_NUM_PHYS,
|
|
};
|
|
|
|
/*
|
|
* exynos4210_rate_to_clk() converts the supplied clock rate to the value that
|
|
* can be written to the phy register.
|
|
*/
|
|
static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg)
|
|
{
|
|
switch (rate) {
|
|
case 12 * MHZ:
|
|
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ;
|
|
break;
|
|
case 24 * MHZ:
|
|
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ;
|
|
break;
|
|
case 48 * MHZ:
|
|
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 offset;
|
|
u32 mask;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS4210_DEVICE:
|
|
offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET;
|
|
mask = EXYNOS_4210_USB_ISOL_DEVICE;
|
|
break;
|
|
case EXYNOS4210_HOST:
|
|
offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET;
|
|
mask = EXYNOS_4210_USB_ISOL_HOST;
|
|
break;
|
|
default:
|
|
return;
|
|
};
|
|
|
|
regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
|
|
}
|
|
|
|
static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
|
|
{
|
|
struct samsung_usb2_phy_driver *drv = inst->drv;
|
|
u32 rstbits = 0;
|
|
u32 phypwr = 0;
|
|
u32 rst;
|
|
u32 pwr;
|
|
u32 clk;
|
|
|
|
switch (inst->cfg->id) {
|
|
case EXYNOS4210_DEVICE:
|
|
phypwr = EXYNOS_4210_UPHYPWR_PHY0;
|
|
rstbits = EXYNOS_4210_URSTCON_PHY0;
|
|
break;
|
|
case EXYNOS4210_HOST:
|
|
phypwr = EXYNOS_4210_UPHYPWR_PHY1;
|
|
rstbits = EXYNOS_4210_URSTCON_PHY1_ALL |
|
|
EXYNOS_4210_URSTCON_PHY1_P0 |
|
|
EXYNOS_4210_URSTCON_PHY1_P1P2 |
|
|
EXYNOS_4210_URSTCON_HOST_LINK_ALL |
|
|
EXYNOS_4210_URSTCON_HOST_LINK_P0;
|
|
writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON);
|
|
break;
|
|
case EXYNOS4210_HSIC0:
|
|
phypwr = EXYNOS_4210_UPHYPWR_HSIC0;
|
|
rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
|
|
EXYNOS_4210_URSTCON_HOST_LINK_P1;
|
|
break;
|
|
case EXYNOS4210_HSIC1:
|
|
phypwr = EXYNOS_4210_UPHYPWR_HSIC1;
|
|
rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
|
|
EXYNOS_4210_URSTCON_HOST_LINK_P2;
|
|
break;
|
|
};
|
|
|
|
if (on) {
|
|
clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK);
|
|
clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK;
|
|
clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET;
|
|
writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK);
|
|
|
|
pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
|
|
pwr &= ~phypwr;
|
|
writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
|
|
|
|
rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST);
|
|
rst |= rstbits;
|
|
writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
|
|
udelay(10);
|
|
rst &= ~rstbits;
|
|
writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
|
|
/* The following delay is necessary for the reset sequence to be
|
|
* completed */
|
|
udelay(80);
|
|
} else {
|
|
pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
|
|
pwr |= phypwr;
|
|
writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
|
|
}
|
|
}
|
|
|
|
static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
/* Order of initialisation is important - first power then isolation */
|
|
exynos4210_phy_pwr(inst, 1);
|
|
exynos4210_isol(inst, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst)
|
|
{
|
|
exynos4210_isol(inst, 1);
|
|
exynos4210_phy_pwr(inst, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct samsung_usb2_common_phy exynos4210_phys[] = {
|
|
{
|
|
.label = "device",
|
|
.id = EXYNOS4210_DEVICE,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "host",
|
|
.id = EXYNOS4210_HOST,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "hsic0",
|
|
.id = EXYNOS4210_HSIC0,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
{
|
|
.label = "hsic1",
|
|
.id = EXYNOS4210_HSIC1,
|
|
.power_on = exynos4210_power_on,
|
|
.power_off = exynos4210_power_off,
|
|
},
|
|
};
|
|
|
|
const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
|
|
.has_mode_switch = 0,
|
|
.num_phys = EXYNOS4210_NUM_PHYS,
|
|
.phys = exynos4210_phys,
|
|
.rate_to_clk = exynos4210_rate_to_clk,
|
|
};
|