leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
80f0936573
linux/arch/arm/mach-omap2
History
Santosh Shilimkar 80f0936573 OMAP4: powerdomain: Remove L3INIT_PD OFF state 
On OMAP4, there is an issue when L3INIT transitions to OFF mode without
device OFF. The SAR restore mechanism will not get triggered without
wakeup from device OFF and hence the USB host and USB TLL context
will not be restored.

Hardware team recommended to remove the OFF state support for L3INIT_PD
since there is no power impact. It will be removed on next OMAP revision
(OMAP4440 and beyond).

Hence this patch removed the OFF state from L3INIT_PD. The deepest
state supported on L3INIT_PD is OSWR just like CORE_PD and PER_PD

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[b-cousson@ti.com: update the changelog with next OMAP info]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21 22:37:28 -07:00
..
include/mach
board-2430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3630sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-4430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517crane.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-apollon.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t35.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t3517.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-devkit8000.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-flash.c
board-flash.h
board-generic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-h4.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0020.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0030.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-ldp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-n8x0.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3beagle.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3logic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3pandora.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3stalker.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3touchbook.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap4panda.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-overo.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rm680.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rx51-peripherals.c omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_module 2010-12-20 18:48:16 -08:00
board-rx51-video.c Added video data to support tvout on rx51 2010-12-20 18:48:16 -08:00
board-rx51.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-zoom-debugboard.c
board-zoom-peripherals.c
board-zoom.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
clkt_clksel.c
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2xxx.c
clock2xxx.h
clock3xxx_data.c OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx_data.c OMAP4: clocks: add dummy clock for mailbox 2010-12-21 21:31:43 -07:00
clock44xx.h
clock2420_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h
clock_common_data.c
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clockdomain.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomain.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomains2xxx_3xxx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clockdomains44xx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
cpuidle34xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
devices.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
dma.c
dpll3xxx.c OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c
gpio.c
gpmc-nand.c
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c
gpmc.c
hsmmc.c
hsmmc.h
i2c.c
id.c
io.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
io.h
iommu2.c
irq.c
Kconfig omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
mailbox.c
Makefile OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
Makefile.boot
mcbsp.c
mux34xx.c
mux34xx.h
mux44xx.c
mux44xx.h
mux2420.c
mux2420.h
mux2430.c
mux2430.h
mux.c
mux.h
omap4-common.c
omap44xx-smc.S
omap_hwmod_3xxx_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Add SIDLE_SMART_WKUP modes to several IPs 2010-12-21 21:31:28 -07:00
omap_hwmod_2420_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_2430_data.c OMAP2430: hwmod data: Use common dev_attr for i2c1 and i2c2 2010-12-21 21:31:00 -07:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h
omap_hwmod.c OMAP: PM: implement context loss count APIs 2010-12-21 21:31:55 -07:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap-headsmp.S
omap-hotplug.c
omap-iommu.c
omap-smp.c
opp2xxx.h
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c
opp2430_data.c
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm34xx.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
pm44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm_bus.c
pm-debug.c OMAP: PM noop: implement context loss count for non-omap_devices 2010-12-21 21:31:55 -07:00
pm.c OMAP4: PM: Do not assume clkdm supports hw transitions 2010-12-21 22:37:28 -07:00
pm.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain2xxx_3xxx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sleep24xx.S
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c
timer-gp.h
timer-mpu.c
usb-ehci.c
usb-fs.c
usb-musb.c
usb-tusb6010.c
wd_timer.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00