linux/Documentation/bpf
Linus Torvalds 0326074ff4 Networking changes for 6.1.
Core
 ----
 
  - Introduce and use a single page frag cache for allocating small skb
    heads, clawing back the 10-20% performance regression in UDP flood
    test from previous fixes.
 
  - Run packets which already went thru HW coalescing thru SW GRO.
    This significantly improves TCP segment coalescing and simplifies
    deployments as different workloads benefit from HW or SW GRO.
 
  - Shrink the size of the base zero-copy send structure.
 
  - Move TCP init under a new slow / sleepable version of DO_ONCE().
 
 BPF
 ---
 
  - Add BPF-specific, any-context-safe memory allocator.
 
  - Add helpers/kfuncs for PKCS#7 signature verification from BPF
    programs.
 
  - Define a new map type and related helpers for user space -> kernel
    communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
 
  - Allow targeting BPF iterators to loop through resources of one
    task/thread.
 
  - Add ability to call selected destructive functions.
    Expose crash_kexec() to allow BPF to trigger a kernel dump.
    Use CAP_SYS_BOOT check on the loading process to judge permissions.
 
  - Enable BPF to collect custom hierarchical cgroup stats efficiently
    by integrating with the rstat framework.
 
  - Support struct arguments for trampoline based programs.
    Only structs with size <= 16B and x86 are supported.
 
  - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
    sockets (instead of just TCP and UDP sockets).
 
  - Add a helper for accessing CLOCK_TAI for time sensitive network
    related programs.
 
  - Support accessing network tunnel metadata's flags.
 
  - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
 
  - Add support for writing to Netfilter's nf_conn:mark.
 
 Protocols
 ---------
 
  - WiFi: more Extremely High Throughput (EHT) and Multi-Link
    Operation (MLO) work (802.11be, WiFi 7).
 
  - vsock: improve support for SO_RCVLOWAT.
 
  - SMC: support SO_REUSEPORT.
 
  - Netlink: define and document how to use netlink in a "modern" way.
    Support reporting missing attributes via extended ACK.
 
  - IPSec: support collect metadata mode for xfrm interfaces.
 
  - TCPv6: send consistent autoflowlabel in SYN_RECV state
    and RST packets.
 
  - TCP: introduce optional per-netns connection hash table to allow
    better isolation between namespaces (opt-in, at the cost of memory
    and cache pressure).
 
  - MPTCP: support TCP_FASTOPEN_CONNECT.
 
  - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
 
  - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
 
  - Open vSwitch:
    - Allow specifying ifindex of new interfaces.
    - Allow conntrack and metering in non-initial user namespace.
 
  - TLS: support the Korean ARIA-GCM crypto algorithm.
 
  - Remove DECnet support.
 
 Driver API
 ----------
 
  - Allow selecting the conduit interface used by each port
    in DSA switches, at runtime.
 
  - Ethernet Power Sourcing Equipment and Power Device support.
 
  - Add tc-taprio support for queueMaxSDU parameter, i.e. setting
    per traffic class max frame size for time-based packet schedules.
 
  - Support PHY rate matching - adapting between differing host-side
    and link-side speeds.
 
  - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
 
  - Validate OF (device tree) nodes for DSA shared ports; make
    phylink-related properties mandatory on DSA and CPU ports.
    Enforcing more uniformity should allow transitioning to phylink.
 
  - Require that flash component name used during update matches one
    of the components for which version is reported by info_get().
 
  - Remove "weight" argument from driver-facing NAPI API as much
    as possible. It's one of those magic knobs which seemed like
    a good idea at the time but is too indirect to use in practice.
 
  - Support offload of TLS connections with 256 bit keys.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Microchip KSZ9896 6-port Gigabit Ethernet Switch
    - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
    - Analog Devices ADIN1110 and ADIN2111 industrial single pair
      Ethernet (10BASE-T1L) MAC+PHY.
    - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
 
  - Ethernet SFPs / modules:
    - RollBall / Hilink / Turris 10G copper SFPs
    - HALNy GPON module
 
  - WiFi:
    - CYW43439 SDIO chipset (brcmfmac)
    - CYW89459 PCIe chipset (brcmfmac)
    - BCM4378 on Apple platforms (brcmfmac)
 
 Drivers
 -------
 
  - CAN:
    - gs_usb: HW timestamp support
 
  - Ethernet PHYs:
    - lan8814: cable diagnostics
 
  - Ethernet NICs:
    - Intel (100G):
      - implement control of FCS/CRC stripping
      - port splitting via devlink
      - L2TPv3 filtering offload
    - nVidia/Mellanox:
      - tunnel offload for sub-functions
      - MACSec offload, w/ Extended packet number and replay
        window offload
      - significantly restructure, and optimize the AF_XDP support,
        align the behavior with other vendors
    - Huawei:
      - configuring DSCP map for traffic class selection
      - querying standard FEC statistics
      - querying SerDes lane number via ethtool
    - Marvell/Cavium:
      - egress priority flow control
      - MACSec offload
    - AMD/SolarFlare:
      - PTP over IPv6 and raw Ethernet
    - small / embedded:
      - ax88772: convert to phylink (to support SFP cages)
      - altera: tse: convert to phylink
      - ftgmac100: support fixed link
      - enetc: standard Ethtool counters
      - macb: ZynqMP SGMII dynamic configuration support
      - tsnep: support multi-queue and use page pool
      - lan743x: Rx IP & TCP checksum offload
      - igc: add xdp frags support to ndo_xdp_xmit
 
  - Ethernet high-speed switches:
    - Marvell (prestera):
      - support SPAN port features (traffic mirroring)
      - nexthop object offloading
    - Microchip (sparx5):
      - multicast forwarding offload
      - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
 
  - Ethernet embedded switches:
    - Marvell (mv88e6xxx):
      - support RGMII cmode
    - NXP (felix):
      - standardized ethtool counters
    - Microchip (lan966x):
      - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
      - traffic policing and mirroring
      - link aggregation / bonding offload
      - QUSGMII PHY mode support
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - cold boot calibration support on WCN6750
    - support to connect to a non-transmit MBSSID AP profile
    - enable remain-on-channel support on WCN6750
    - Wake-on-WLAN support for WCN6750
    - support to provide transmit power from firmware via nl80211
    - support to get power save duration for each client
    - spectral scan support for 160 MHz
 
  - MediaTek WiFi (mt76):
    - WiFi-to-Ethernet bridging offload for MT7986 chips
 
  - RealTek WiFi (rtw89):
    - P2P support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmM7vtkACgkQMUZtbf5S
 Irvotg//dmh53rC+UMKO3OgOqPlSMnaqzbUdDEfN6mj4Mpox7Csb8zERVURHhBHY
 fvlXWsDgxmvgTebI5fvNC5+f1iW5xcqgJV2TWnNmDOKWwvQwb6qQfgixVmunvkpe
 IIukMXYt0dAf9bXeeEfbNXcCb85cPwB76stX0tMV6BX7osp3T0TL1fvFk0NJkL0j
 TeydLad/yAQtPb4TbeWYjNDoxPVDf0cVpUrevLGmWE88UMYmgTqPze+h1W5Wri52
 bzjdLklY/4cgcIZClHQ6F9CeRWqEBxvujA5Hj/cwOcn/ptVVJWUGi7sQo3sYkoSs
 HFu+F8XsTec14kGNC0Ab40eVdqs5l/w8+E+4jvgXeKGOtVns8DwoiUIzqXpyty89
 Ib04mffrwWNjFtHvo/kIsNwP05X2PGE9HUHfwsTUfisl/ASvMmQp7D7vUoqQC/4B
 AMVzT5qpjkmfBHYQQGuw8FxJhMeAOjC6aAo6censhXJyiUhIfleQsN0syHdaNb8q
 9RZlhAgQoVb6ZgvBV8r8unQh/WtNZ3AopwifwVJld2unsE/UNfQy2KyqOWBES/zf
 LP9sfuX0JnmHn8s1BQEUMPU1jF9ZVZCft7nufJDL6JhlAL+bwZeEN4yCiAHOPZqE
 ymSLHI9s8yWZoNpuMWKrI9kFexVnQFKmA3+quAJUcYHNMSsLkL8=
 =Gsio
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...
2022-10-04 13:38:03 -07:00
..
libbpf bpf, docs: Remove deprecated xsk libbpf APIs description 2022-07-08 14:18:50 +02:00
bpf_design_QA.rst bpf: Update bpf_design_QA.rst to clarify that BTF_ID does not ABIify a function 2022-08-04 13:17:24 -07:00
bpf_devel_QA.rst docs: netdev: move the netdev-FAQ to the process pages 2022-03-31 10:49:39 +02:00
bpf_licensing.rst bpf: Document BPF licensing. 2021-09-22 23:13:13 +02:00
bpf_prog_run.rst Documentation/bpf: Add documentation for BPF_PROG_RUN 2022-03-09 14:19:22 -08:00
btf.rst docs/bpf: Update documentation for BTF_KIND_FUNC 2022-07-19 09:42:09 -07:00
clang-notes.rst bpf, docs: Add Clang note about BPF_ALU 2022-09-30 13:41:25 -07:00
classic_vs_extended.rst bpf, docs: Split the comparism to classic BPF from instruction-set.rst 2021-12-30 16:31:44 -08:00
drgn.rst bpf: Document bpf_inspect drgn tool 2020-03-26 00:08:36 +01:00
faq.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
helpers.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
index.rst Documentation: bpf: Add implementation notes documentations to table of contents 2022-10-03 09:16:52 -07:00
instruction-set.rst Networking changes for 6.1. 2022-10-04 13:38:03 -07:00
kfuncs.rst bpf: Tweak definition of KF_TRUSTED_ARGS 2022-09-21 19:25:26 -07:00
linux-notes.rst bpf, docs: Delete misformatted table. 2022-10-01 08:51:26 -07:00
llvm_reloc.rst bpf, docs: Add llvm_reloc.rst to explain llvm bpf relocations 2021-05-28 22:12:04 +02:00
map_cgroup_storage.rst Remove duplicate words inside documentation 2022-09-27 13:21:43 -06:00
map_hash.rst bpf, docs: document BPF_MAP_TYPE_HASH and variants 2022-07-19 10:38:03 -07:00
maps.rst bpf, docs: Move handling of maps to Documentation/bpf/maps.rst 2021-11-30 10:52:11 -08:00
other.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
prog_cgroup_sockopt.rst bpf: Document optval > PAGE_SIZE behavior for sockopt hooks 2020-06-17 10:54:05 -07:00
prog_cgroup_sysctl.rst bpf: Document BPF_PROG_TYPE_CGROUP_SYSCTL 2019-04-18 16:05:36 -07:00
prog_flow_dissector.rst bpf/flow_dissector: add mode to enforce global BPF flow dissector 2019-10-07 20:16:33 -07:00
prog_lsm.rst bpf, docs: Rename bpf_lsm.rst to prog_lsm.rst 2021-11-17 23:23:58 +01:00
prog_sk_lookup.rst bpf: sk_lookup: Add user documentation 2020-08-24 14:46:50 -07:00
programs.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
ringbuf.rst docs/bpf: Remove source code links 2020-09-14 18:46:54 -07:00
s390.rst bpf: Add s390 testing documentation 2019-10-30 16:25:31 +01:00
syscall_api.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
test_debug.rst bpf, docs: Fix ordering of bpf documentation 2021-11-17 23:24:01 +01:00
verifier.rst bpf, docs: Add a missing colon in verifier.rst 2022-02-28 18:20:35 +01:00