Files
linux/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
Ioana Ciornei 6253d5e39c dpaa2-switch: add support for configuring per port unknown flooding
Add support for configuring per port unknown flooding by accepting both
BR_FLOOD and BR_MCAST_FLOOD as offloadable bridge port flags.

The DPAA2 switch does not support at the moment configuration of unknown
multicast flooding independently of unknown unicast flooding, therefore
check that both BR_FLOOD and BR_MCAST_FLOOD have the same state.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22 16:37:45 -07:00

180 lines
4.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* DPAA2 Ethernet Switch declarations
*
* Copyright 2014-2016 Freescale Semiconductor Inc.
* Copyright 2017-2021 NXP
*
*/
#ifndef __ETHSW_H
#define __ETHSW_H
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/if_vlan.h>
#include <uapi/linux/if_bridge.h>
#include <net/switchdev.h>
#include <linux/if_bridge.h>
#include <linux/fsl/mc.h>
#include <soc/fsl/dpaa2-io.h>
#include "dpsw.h"
/* Number of IRQs supported */
#define DPSW_IRQ_NUM 2
/* Port is member of VLAN */
#define ETHSW_VLAN_MEMBER 1
/* VLAN to be treated as untagged on egress */
#define ETHSW_VLAN_UNTAGGED 2
/* Untagged frames will be assigned to this VLAN */
#define ETHSW_VLAN_PVID 4
/* VLAN configured on the switch */
#define ETHSW_VLAN_GLOBAL 8
/* Maximum Frame Length supported by HW (currently 10k) */
#define DPAA2_MFL (10 * 1024)
#define ETHSW_MAX_FRAME_LENGTH (DPAA2_MFL - VLAN_ETH_HLEN - ETH_FCS_LEN)
#define ETHSW_L2_MAX_FRM(mtu) ((mtu) + VLAN_ETH_HLEN + ETH_FCS_LEN)
#define ETHSW_FEATURE_MAC_ADDR BIT(0)
/* Number of receive queues (one RX and one TX_CONF) */
#define DPAA2_SWITCH_RX_NUM_FQS 2
/* Hardware requires alignment for ingress/egress buffer addresses */
#define DPAA2_SWITCH_RX_BUF_RAW_SIZE PAGE_SIZE
#define DPAA2_SWITCH_RX_BUF_TAILROOM \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
#define DPAA2_SWITCH_RX_BUF_SIZE \
(DPAA2_SWITCH_RX_BUF_RAW_SIZE - DPAA2_SWITCH_RX_BUF_TAILROOM)
#define DPAA2_SWITCH_STORE_SIZE 16
/* Buffer management */
#define BUFS_PER_CMD 7
#define DPAA2_ETHSW_NUM_BUFS (1024 * BUFS_PER_CMD)
#define DPAA2_ETHSW_REFILL_THRESH (DPAA2_ETHSW_NUM_BUFS * 5 / 6)
/* Number of times to retry DPIO portal operations while waiting
* for portal to finish executing current command and become
* available. We want to avoid being stuck in a while loop in case
* hardware becomes unresponsive, but not give up too easily if
* the portal really is busy for valid reasons
*/
#define DPAA2_SWITCH_SWP_BUSY_RETRIES 1000
/* Hardware annotation buffer size */
#define DPAA2_SWITCH_HWA_SIZE 64
/* Software annotation buffer size */
#define DPAA2_SWITCH_SWA_SIZE 64
#define DPAA2_SWITCH_TX_BUF_ALIGN 64
#define DPAA2_SWITCH_TX_DATA_OFFSET \
(DPAA2_SWITCH_HWA_SIZE + DPAA2_SWITCH_SWA_SIZE)
#define DPAA2_SWITCH_NEEDED_HEADROOM \
(DPAA2_SWITCH_TX_DATA_OFFSET + DPAA2_SWITCH_TX_BUF_ALIGN)
extern const struct ethtool_ops dpaa2_switch_port_ethtool_ops;
struct ethsw_core;
struct dpaa2_switch_fq {
struct ethsw_core *ethsw;
enum dpsw_queue_type type;
struct dpaa2_io_store *store;
struct dpaa2_io_notification_ctx nctx;
struct napi_struct napi;
u32 fqid;
};
struct dpaa2_switch_fdb {
struct net_device *bridge_dev;
u16 fdb_id;
bool in_use;
};
/* Per port private data */
struct ethsw_port_priv {
struct net_device *netdev;
u16 idx;
struct ethsw_core *ethsw_data;
u8 link_state;
u8 stp_state;
u8 vlans[VLAN_VID_MASK + 1];
u16 pvid;
u16 tx_qdid;
struct dpaa2_switch_fdb *fdb;
bool bcast_flood;
bool ucast_flood;
};
/* Switch data */
struct ethsw_core {
struct device *dev;
struct fsl_mc_io *mc_io;
u16 dpsw_handle;
struct dpsw_attr sw_attr;
u16 major, minor;
unsigned long features;
int dev_id;
struct ethsw_port_priv **ports;
struct iommu_domain *iommu_domain;
u8 vlans[VLAN_VID_MASK + 1];
struct workqueue_struct *workqueue;
struct dpaa2_switch_fq fq[DPAA2_SWITCH_RX_NUM_FQS];
struct fsl_mc_device *dpbp_dev;
int buf_count;
u16 bpid;
int napi_users;
struct dpaa2_switch_fdb *fdbs;
};
static inline bool dpaa2_switch_supports_cpu_traffic(struct ethsw_core *ethsw)
{
if (ethsw->sw_attr.options & DPSW_OPT_CTRL_IF_DIS) {
dev_err(ethsw->dev, "Control Interface is disabled, cannot probe\n");
return false;
}
if (ethsw->sw_attr.flooding_cfg != DPSW_FLOODING_PER_FDB) {
dev_err(ethsw->dev, "Flooding domain is not per FDB, cannot probe\n");
return false;
}
if (ethsw->sw_attr.broadcast_cfg != DPSW_BROADCAST_PER_FDB) {
dev_err(ethsw->dev, "Broadcast domain is not per FDB, cannot probe\n");
return false;
}
if (ethsw->sw_attr.max_fdbs < ethsw->sw_attr.num_ifs) {
dev_err(ethsw->dev, "The number of FDBs is lower than the number of ports, cannot probe\n");
return false;
}
return true;
}
bool dpaa2_switch_port_dev_check(const struct net_device *netdev);
int dpaa2_switch_port_vlans_add(struct net_device *netdev,
const struct switchdev_obj_port_vlan *vlan);
int dpaa2_switch_port_vlans_del(struct net_device *netdev,
const struct switchdev_obj_port_vlan *vlan);
typedef int dpaa2_switch_fdb_cb_t(struct ethsw_port_priv *port_priv,
struct fdb_dump_entry *fdb_entry,
void *data);
#endif /* __ETHSW_H */