forked from Minki/linux
80ee72e7e9
In the past, all the MMC pins had allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; which was actually a no-op. We were relying on U-boot to set the bias pull up for us. These properties were removed as part of the fix up to actually support no bias on the pins. During the transition some boards experienced regular MMC time-outs during normal operation, while others completely failed to initialize the SD card. Given that MMC starts in open-drain mode and the pull-ups are required, it's best to enable it for all the pin settings. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
1333 lines
31 KiB
Plaintext
1333 lines
31 KiB
Plaintext
/*
|
|
* Copyright 2012 Stefan Roese
|
|
* Stefan Roese <sr@denx.de>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
#include <dt-bindings/clock/sun4i-a10-pll2.h>
|
|
#include <dt-bindings/dma/sun4i-a10.h>
|
|
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
framebuffer@0 {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "de_be0-lcd0-hdmi";
|
|
clocks = <&ahb_gates 36>, <&ahb_gates 43>,
|
|
<&ahb_gates 44>, <&de_be0_clk>,
|
|
<&tcon0_ch1_clk>, <&dram_gates 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
framebuffer@1 {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
|
|
clocks = <&ahb_gates 36>, <&ahb_gates 43>,
|
|
<&ahb_gates 44>, <&ahb_gates 46>,
|
|
<&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
|
|
<&dram_gates 25>, <&dram_gates 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
framebuffer@2 {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "de_fe0-de_be0-lcd0";
|
|
clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
|
|
<&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
|
|
<&dram_gates 25>, <&dram_gates 26>;
|
|
status = "disabled";
|
|
};
|
|
|
|
framebuffer@3 {
|
|
compatible = "allwinner,simple-framebuffer",
|
|
"simple-framebuffer";
|
|
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
|
|
clocks = <&ahb_gates 34>, <&ahb_gates 36>,
|
|
<&ahb_gates 44>, <&ahb_gates 46>,
|
|
<&de_be0_clk>, <&de_fe0_clk>,
|
|
<&tcon0_ch1_clk>, <&dram_gates 5>,
|
|
<&dram_gates 25>, <&dram_gates 26>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a8";
|
|
reg = <0x0>;
|
|
clocks = <&cpu>;
|
|
clock-latency = <244144>; /* 8 32k periods */
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1008000 1400000
|
|
912000 1350000
|
|
864000 1300000
|
|
624000 1250000
|
|
>;
|
|
#cooling-cells = <2>;
|
|
cooling-min-level = <0>;
|
|
cooling-max-level = <3>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal {
|
|
/* milliseconds */
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
thermal-sensors = <&rtp>;
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert0>;
|
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
|
|
trips {
|
|
cpu_alert0: cpu_alert0 {
|
|
/* milliCelsius */
|
|
temperature = <850000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu_crit: cpu_crit {
|
|
/* milliCelsius */
|
|
temperature = <100000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x80000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
/*
|
|
* This is a dummy clock, to be used as placeholder on
|
|
* other mux clocks when a specific parent clock is not
|
|
* yet implemented. It should be dropped when the driver
|
|
* is complete.
|
|
*/
|
|
dummy: dummy {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc24M: clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc3M: osc3M_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <8>;
|
|
clock-mult = <1>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "osc3M";
|
|
};
|
|
|
|
osc32k: clk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
pll2: clk@01c20008 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll2-clk";
|
|
reg = <0x01c20008 0x8>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll2-1x", "pll2-2x",
|
|
"pll2-4x", "pll2-8x";
|
|
};
|
|
|
|
pll3: clk@01c20010 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll3-clk";
|
|
reg = <0x01c20010 0x4>;
|
|
clocks = <&osc3M>;
|
|
clock-output-names = "pll3";
|
|
};
|
|
|
|
pll3x2: pll3x2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <2>;
|
|
clocks = <&pll3>;
|
|
clock-output-names = "pll3-2x";
|
|
};
|
|
|
|
pll4: clk@01c20018 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20018 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll4";
|
|
};
|
|
|
|
pll5: clk@01c20020 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll5-clk";
|
|
reg = <0x01c20020 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll5_ddr", "pll5_other";
|
|
};
|
|
|
|
pll6: clk@01c20028 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll6-clk";
|
|
reg = <0x01c20028 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll6_sata", "pll6_other", "pll6";
|
|
};
|
|
|
|
pll7: clk@01c20030 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll3-clk";
|
|
reg = <0x01c20030 0x4>;
|
|
clocks = <&osc3M>;
|
|
clock-output-names = "pll7";
|
|
};
|
|
|
|
pll7x2: pll7x2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
#clock-cells = <0>;
|
|
clock-div = <1>;
|
|
clock-mult = <2>;
|
|
clocks = <&pll7>;
|
|
clock-output-names = "pll7-2x";
|
|
};
|
|
|
|
/* dummy is 200M */
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-axi-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
axi_gates: clk@01c2005c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-axi-gates-clk";
|
|
reg = <0x01c2005c 0x4>;
|
|
clocks = <&axi>;
|
|
clock-indices = <0>;
|
|
clock-output-names = "axi_dram";
|
|
};
|
|
|
|
ahb: ahb@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "ahb";
|
|
};
|
|
|
|
ahb_gates: clk@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-ahb-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb>;
|
|
clock-indices = <0>, <1>,
|
|
<2>, <3>,
|
|
<4>, <5>, <6>,
|
|
<7>, <8>, <9>,
|
|
<10>, <11>, <12>,
|
|
<13>, <14>, <16>,
|
|
<17>, <18>, <20>,
|
|
<21>, <22>, <23>,
|
|
<24>, <25>, <26>,
|
|
<32>, <33>, <34>,
|
|
<35>, <36>, <37>,
|
|
<40>, <41>, <43>,
|
|
<44>, <45>,
|
|
<46>, <47>,
|
|
<50>, <52>;
|
|
clock-output-names = "ahb_usb0", "ahb_ehci0",
|
|
"ahb_ohci0", "ahb_ehci1",
|
|
"ahb_ohci1", "ahb_ss", "ahb_dma",
|
|
"ahb_bist", "ahb_mmc0", "ahb_mmc1",
|
|
"ahb_mmc2", "ahb_mmc3", "ahb_ms",
|
|
"ahb_nand", "ahb_sdram", "ahb_ace",
|
|
"ahb_emac", "ahb_ts", "ahb_spi0",
|
|
"ahb_spi1", "ahb_spi2", "ahb_spi3",
|
|
"ahb_pata", "ahb_sata", "ahb_gps",
|
|
"ahb_ve", "ahb_tvd", "ahb_tve0",
|
|
"ahb_tve1", "ahb_lcd0", "ahb_lcd1",
|
|
"ahb_csi0", "ahb_csi1", "ahb_hdmi",
|
|
"ahb_de_be0", "ahb_de_be1",
|
|
"ahb_de_fe0", "ahb_de_fe1",
|
|
"ahb_mp", "ahb_mali400";
|
|
};
|
|
|
|
apb0: apb0@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-apb0-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb0>;
|
|
clock-indices = <0>, <1>,
|
|
<2>, <3>,
|
|
<5>, <6>,
|
|
<7>, <10>;
|
|
clock-output-names = "apb0_codec", "apb0_spdif",
|
|
"apb0_ac97", "apb0_iis",
|
|
"apb0_pio", "apb0_ir0",
|
|
"apb0_ir1", "apb0_keypad";
|
|
};
|
|
|
|
apb1: clk@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
apb1_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-apb1-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-indices = <0>, <1>,
|
|
<2>, <4>,
|
|
<5>, <6>,
|
|
<7>, <16>,
|
|
<17>, <18>,
|
|
<19>, <20>,
|
|
<21>, <22>,
|
|
<23>;
|
|
clock-output-names = "apb1_i2c0", "apb1_i2c1",
|
|
"apb1_i2c2", "apb1_can",
|
|
"apb1_scr", "apb1_ps20",
|
|
"apb1_ps21", "apb1_uart0",
|
|
"apb1_uart1", "apb1_uart2",
|
|
"apb1_uart3", "apb1_uart4",
|
|
"apb1_uart5", "apb1_uart6",
|
|
"apb1_uart7";
|
|
};
|
|
|
|
nand_clk: clk@01c20080 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20080 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
ms_clk: clk@01c20084 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20084 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ms";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc0",
|
|
"mmc0_output",
|
|
"mmc0_sample";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc1",
|
|
"mmc1_output",
|
|
"mmc1_sample";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc2",
|
|
"mmc2_output",
|
|
"mmc2_sample";
|
|
};
|
|
|
|
mmc3_clk: clk@01c20094 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-mmc-clk";
|
|
reg = <0x01c20094 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc3",
|
|
"mmc3_output",
|
|
"mmc3_sample";
|
|
};
|
|
|
|
ts_clk: clk@01c20098 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20098 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ts";
|
|
};
|
|
|
|
ss_clk: clk@01c2009c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2009c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ss";
|
|
};
|
|
|
|
spi0_clk: clk@01c200a0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi0";
|
|
};
|
|
|
|
spi1_clk: clk@01c200a4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi1";
|
|
};
|
|
|
|
spi2_clk: clk@01c200a8 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a8 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi2";
|
|
};
|
|
|
|
pata_clk: clk@01c200ac {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200ac 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "pata";
|
|
};
|
|
|
|
ir0_clk: clk@01c200b0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir0";
|
|
};
|
|
|
|
ir1_clk: clk@01c200b4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir1";
|
|
};
|
|
|
|
spdif_clk: clk@01c200c0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod1-clk";
|
|
reg = <0x01c200c0 0x4>;
|
|
clocks = <&pll2 SUN4I_A10_PLL2_8X>,
|
|
<&pll2 SUN4I_A10_PLL2_4X>,
|
|
<&pll2 SUN4I_A10_PLL2_2X>,
|
|
<&pll2 SUN4I_A10_PLL2_1X>;
|
|
clock-output-names = "spdif";
|
|
};
|
|
|
|
usb_clk: clk@01c200cc {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-usb-clk";
|
|
reg = <0x01c200cc 0x4>;
|
|
clocks = <&pll6 1>;
|
|
clock-output-names = "usb_ohci0", "usb_ohci1",
|
|
"usb_phy";
|
|
};
|
|
|
|
spi3_clk: clk@01c200d4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200d4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi3";
|
|
};
|
|
|
|
dram_gates: clk@01c20100 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-dram-gates-clk";
|
|
reg = <0x01c20100 0x4>;
|
|
clocks = <&pll5 0>;
|
|
clock-indices = <0>,
|
|
<1>, <2>,
|
|
<3>,
|
|
<4>,
|
|
<5>, <6>,
|
|
<15>,
|
|
<24>, <25>,
|
|
<26>, <27>,
|
|
<28>, <29>;
|
|
clock-output-names = "dram_ve",
|
|
"dram_csi0", "dram_csi1",
|
|
"dram_ts",
|
|
"dram_tvd",
|
|
"dram_tve0", "dram_tve1",
|
|
"dram_output",
|
|
"dram_de_fe1", "dram_de_fe0",
|
|
"dram_de_be0", "dram_de_be1",
|
|
"dram_de_mp", "dram_ace";
|
|
};
|
|
|
|
de_be0_clk: clk@01c20104 {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-display-clk";
|
|
reg = <0x01c20104 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll5 1>;
|
|
clock-output-names = "de-be0";
|
|
};
|
|
|
|
de_be1_clk: clk@01c20108 {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-display-clk";
|
|
reg = <0x01c20108 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll5 1>;
|
|
clock-output-names = "de-be1";
|
|
};
|
|
|
|
de_fe0_clk: clk@01c2010c {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-display-clk";
|
|
reg = <0x01c2010c 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll5 1>;
|
|
clock-output-names = "de-fe0";
|
|
};
|
|
|
|
de_fe1_clk: clk@01c20110 {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-display-clk";
|
|
reg = <0x01c20110 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll5 1>;
|
|
clock-output-names = "de-fe1";
|
|
};
|
|
|
|
|
|
tcon0_ch0_clk: clk@01c20118 {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
|
|
reg = <0x01c20118 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
|
|
clock-output-names = "tcon0-ch0-sclk";
|
|
|
|
};
|
|
|
|
tcon1_ch0_clk: clk@01c2011c {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
|
|
reg = <0x01c2011c 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
|
|
clock-output-names = "tcon1-ch0-sclk";
|
|
|
|
};
|
|
|
|
tcon0_ch1_clk: clk@01c2012c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
|
|
reg = <0x01c2012c 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
|
|
clock-output-names = "tcon0-ch1-sclk";
|
|
|
|
};
|
|
|
|
tcon1_ch1_clk: clk@01c20130 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
|
|
reg = <0x01c20130 0x4>;
|
|
clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
|
|
clock-output-names = "tcon1-ch1-sclk";
|
|
|
|
};
|
|
|
|
ve_clk: clk@01c2013c {
|
|
#clock-cells = <0>;
|
|
#reset-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ve-clk";
|
|
reg = <0x01c2013c 0x4>;
|
|
clocks = <&pll4>;
|
|
clock-output-names = "ve";
|
|
};
|
|
|
|
codec_clk: clk@01c20140 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-codec-clk";
|
|
reg = <0x01c20140 0x4>;
|
|
clocks = <&pll2 SUN4I_A10_PLL2_1X>;
|
|
clock-output-names = "codec";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
sram-controller@01c00000 {
|
|
compatible = "allwinner,sun4i-a10-sram-controller";
|
|
reg = <0x01c00000 0x30>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
sram_a: sram@00000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00000000 0xc000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x00000000 0xc000>;
|
|
|
|
emac_sram: sram-section@8000 {
|
|
compatible = "allwinner,sun4i-a10-sram-a3-a4";
|
|
reg = <0x8000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sram_d: sram@00010000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00010000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x00010000 0x1000>;
|
|
|
|
otg_sram: sram-section@0000 {
|
|
compatible = "allwinner,sun4i-a10-sram-d";
|
|
reg = <0x0000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
dma: dma-controller@01c02000 {
|
|
compatible = "allwinner,sun4i-a10-dma";
|
|
reg = <0x01c02000 0x1000>;
|
|
interrupts = <27>;
|
|
clocks = <&ahb_gates 6>;
|
|
#dma-cells = <2>;
|
|
};
|
|
|
|
nfc: nand@01c03000 {
|
|
compatible = "allwinner,sun4i-a10-nand";
|
|
reg = <0x01c03000 0x1000>;
|
|
interrupts = <37>;
|
|
clocks = <&ahb_gates 13>, <&nand_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
|
|
dma-names = "rxtx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi0: spi@01c05000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c05000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&ahb_gates 20>, <&spi0_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
|
|
<&dma SUN4I_DMA_DEDICATED 26>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@01c06000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c06000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&ahb_gates 21>, <&spi1_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
|
|
<&dma SUN4I_DMA_DEDICATED 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emac: ethernet@01c0b000 {
|
|
compatible = "allwinner,sun4i-a10-emac";
|
|
reg = <0x01c0b000 0x1000>;
|
|
interrupts = <55>;
|
|
clocks = <&ahb_gates 17>;
|
|
allwinner,sram = <&emac_sram 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio: mdio@01c0b080 {
|
|
compatible = "allwinner,sun4i-a10-mdio";
|
|
reg = <0x01c0b080 0x14>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc0: mmc@01c0f000 {
|
|
compatible = "allwinner,sun4i-a10-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ahb_gates 8>,
|
|
<&mmc0_clk 0>,
|
|
<&mmc0_clk 1>,
|
|
<&mmc0_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
interrupts = <32>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@01c10000 {
|
|
compatible = "allwinner,sun4i-a10-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ahb_gates 9>,
|
|
<&mmc1_clk 0>,
|
|
<&mmc1_clk 1>,
|
|
<&mmc1_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
interrupts = <33>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@01c11000 {
|
|
compatible = "allwinner,sun4i-a10-mmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ahb_gates 10>,
|
|
<&mmc2_clk 0>,
|
|
<&mmc2_clk 1>,
|
|
<&mmc2_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
interrupts = <34>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc3: mmc@01c12000 {
|
|
compatible = "allwinner,sun4i-a10-mmc";
|
|
reg = <0x01c12000 0x1000>;
|
|
clocks = <&ahb_gates 11>,
|
|
<&mmc3_clk 0>,
|
|
<&mmc3_clk 1>,
|
|
<&mmc3_clk 2>;
|
|
clock-names = "ahb",
|
|
"mmc",
|
|
"output",
|
|
"sample";
|
|
interrupts = <35>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
usb_otg: usb@01c13000 {
|
|
compatible = "allwinner,sun4i-a10-musb";
|
|
reg = <0x01c13000 0x0400>;
|
|
clocks = <&ahb_gates 0>;
|
|
interrupts = <38>;
|
|
interrupt-names = "mc";
|
|
phys = <&usbphy 0>;
|
|
phy-names = "usb";
|
|
extcon = <&usbphy 0>;
|
|
allwinner,sram = <&otg_sram 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy: phy@01c13400 {
|
|
#phy-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-usb-phy";
|
|
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
|
|
reg-names = "phy_ctrl", "pmu1", "pmu2";
|
|
clocks = <&usb_clk 8>;
|
|
clock-names = "usb_phy";
|
|
resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
|
|
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci0: usb@01c14000 {
|
|
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
|
|
reg = <0x01c14000 0x100>;
|
|
interrupts = <39>;
|
|
clocks = <&ahb_gates 1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@01c14400 {
|
|
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
|
|
reg = <0x01c14400 0x100>;
|
|
interrupts = <64>;
|
|
clocks = <&usb_clk 6>, <&ahb_gates 2>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto-engine@01c15000 {
|
|
compatible = "allwinner,sun4i-a10-crypto";
|
|
reg = <0x01c15000 0x1000>;
|
|
interrupts = <86>;
|
|
clocks = <&ahb_gates 5>, <&ss_clk>;
|
|
clock-names = "ahb", "mod";
|
|
};
|
|
|
|
spi2: spi@01c17000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c17000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&ahb_gates 22>, <&spi2_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
|
|
<&dma SUN4I_DMA_DEDICATED 28>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ahci: sata@01c18000 {
|
|
compatible = "allwinner,sun4i-a10-ahci";
|
|
reg = <0x01c18000 0x1000>;
|
|
interrupts = <56>;
|
|
clocks = <&pll6 0>, <&ahb_gates 25>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci1: usb@01c1c000 {
|
|
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
|
|
reg = <0x01c1c000 0x100>;
|
|
interrupts = <40>;
|
|
clocks = <&ahb_gates 3>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci1: usb@01c1c400 {
|
|
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
|
|
reg = <0x01c1c400 0x100>;
|
|
interrupts = <65>;
|
|
clocks = <&usb_clk 7>, <&ahb_gates 4>;
|
|
phys = <&usbphy 2>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@01c1f000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c1f000 0x1000>;
|
|
interrupts = <50>;
|
|
clocks = <&ahb_gates 23>, <&spi3_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
|
|
<&dma SUN4I_DMA_DEDICATED 30>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@01c20400 {
|
|
compatible = "allwinner,sun4i-a10-ic";
|
|
reg = <0x01c20400 0x400>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun4i-a10-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <28>;
|
|
clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#gpio-cells = <3>;
|
|
|
|
emac_pins_a: emac0@0 {
|
|
pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA9", "PA10",
|
|
"PA11", "PA12", "PA13", "PA14",
|
|
"PA15", "PA16";
|
|
function = "emac";
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
pins = "PB0", "PB1";
|
|
function = "i2c0";
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
pins = "PB18", "PB19";
|
|
function = "i2c1";
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
pins = "PB20", "PB21";
|
|
function = "i2c2";
|
|
};
|
|
|
|
ir0_rx_pins_a: ir0@0 {
|
|
pins = "PB4";
|
|
function = "ir0";
|
|
};
|
|
|
|
ir0_tx_pins_a: ir0@1 {
|
|
pins = "PB3";
|
|
function = "ir0";
|
|
};
|
|
|
|
ir1_rx_pins_a: ir1@0 {
|
|
pins = "PB23";
|
|
function = "ir1";
|
|
};
|
|
|
|
ir1_tx_pins_a: ir1@1 {
|
|
pins = "PB22";
|
|
function = "ir1";
|
|
};
|
|
|
|
mmc0_pins_a: mmc0@0 {
|
|
pins = "PF0", "PF1", "PF2",
|
|
"PF3", "PF4", "PF5";
|
|
function = "mmc0";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
|
|
pins = "PH1";
|
|
function = "gpio_in";
|
|
bias-pull-up;
|
|
};
|
|
|
|
ps20_pins_a: ps20@0 {
|
|
pins = "PI20", "PI21";
|
|
function = "ps2";
|
|
};
|
|
|
|
ps21_pins_a: ps21@0 {
|
|
pins = "PH12", "PH13";
|
|
function = "ps2";
|
|
};
|
|
|
|
pwm0_pins_a: pwm0@0 {
|
|
pins = "PB2";
|
|
function = "pwm";
|
|
};
|
|
|
|
pwm1_pins_a: pwm1@0 {
|
|
pins = "PI3";
|
|
function = "pwm";
|
|
};
|
|
|
|
spdif_tx_pins_a: spdif@0 {
|
|
pins = "PB13";
|
|
function = "spdif";
|
|
bias-pull-up;
|
|
};
|
|
|
|
spi0_pins_a: spi0@0 {
|
|
pins = "PI11", "PI12", "PI13";
|
|
function = "spi0";
|
|
};
|
|
|
|
spi0_cs0_pins_a: spi0_cs0@0 {
|
|
pins = "PI10";
|
|
function = "spi0";
|
|
};
|
|
|
|
spi1_pins_a: spi1@0 {
|
|
pins = "PI17", "PI18", "PI19";
|
|
function = "spi1";
|
|
};
|
|
|
|
spi1_cs0_pins_a: spi1_cs0@0 {
|
|
pins = "PI16";
|
|
function = "spi1";
|
|
};
|
|
|
|
spi2_pins_a: spi2@0 {
|
|
pins = "PC20", "PC21", "PC22";
|
|
function = "spi2";
|
|
};
|
|
|
|
spi2_pins_b: spi2@1 {
|
|
pins = "PB15", "PB16", "PB17";
|
|
function = "spi2";
|
|
};
|
|
|
|
spi2_cs0_pins_a: spi2_cs0@0 {
|
|
pins = "PC19";
|
|
function = "spi2";
|
|
};
|
|
|
|
spi2_cs0_pins_b: spi2_cs0@1 {
|
|
pins = "PB14";
|
|
function = "spi2";
|
|
};
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
pins = "PB22", "PB23";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart0_pins_b: uart0@1 {
|
|
pins = "PF2", "PF4";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pins_a: uart1@0 {
|
|
pins = "PA10", "PA11";
|
|
function = "uart1";
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0x90>;
|
|
interrupts = <22>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt: watchdog@01c20c90 {
|
|
compatible = "allwinner,sun4i-a10-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
rtc: rtc@01c20d00 {
|
|
compatible = "allwinner,sun4i-a10-rtc";
|
|
reg = <0x01c20d00 0x20>;
|
|
interrupts = <24>;
|
|
};
|
|
|
|
pwm: pwm@01c20e00 {
|
|
compatible = "allwinner,sun4i-a10-pwm";
|
|
reg = <0x01c20e00 0xc>;
|
|
clocks = <&osc24M>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spdif: spdif@01c21000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-spdif";
|
|
reg = <0x01c21000 0x400>;
|
|
interrupts = <13>;
|
|
clocks = <&apb0_gates 1>, <&spdif_clk>;
|
|
clock-names = "apb", "spdif";
|
|
dmas = <&dma SUN4I_DMA_NORMAL 2>,
|
|
<&dma SUN4I_DMA_NORMAL 2>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ir0: ir@01c21800 {
|
|
compatible = "allwinner,sun4i-a10-ir";
|
|
clocks = <&apb0_gates 6>, <&ir0_clk>;
|
|
clock-names = "apb", "ir";
|
|
interrupts = <5>;
|
|
reg = <0x01c21800 0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ir1: ir@01c21c00 {
|
|
compatible = "allwinner,sun4i-a10-ir";
|
|
clocks = <&apb0_gates 7>, <&ir1_clk>;
|
|
clock-names = "apb", "ir";
|
|
interrupts = <6>;
|
|
reg = <0x01c21c00 0x40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lradc: lradc@01c22800 {
|
|
compatible = "allwinner,sun4i-a10-lradc-keys";
|
|
reg = <0x01c22800 0x100>;
|
|
interrupts = <31>;
|
|
status = "disabled";
|
|
};
|
|
|
|
codec: codec@01c22c00 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-codec";
|
|
reg = <0x01c22c00 0x40>;
|
|
interrupts = <30>;
|
|
clocks = <&apb0_gates 0>, <&codec_clk>;
|
|
clock-names = "apb", "codec";
|
|
dmas = <&dma SUN4I_DMA_NORMAL 19>,
|
|
<&dma SUN4I_DMA_NORMAL 19>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
sid: eeprom@01c23800 {
|
|
compatible = "allwinner,sun4i-a10-sid";
|
|
reg = <0x01c23800 0x10>;
|
|
};
|
|
|
|
rtp: rtp@01c25000 {
|
|
compatible = "allwinner,sun4i-a10-ts";
|
|
reg = <0x01c25000 0x100>;
|
|
interrupts = <29>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <1>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <2>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <3>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@01c29000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29000 0x400>;
|
|
interrupts = <17>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 20>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@01c29400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29400 0x400>;
|
|
interrupts = <18>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 21>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@01c29800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29800 0x400>;
|
|
interrupts = <19>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 22>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@01c29c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c29c00 0x400>;
|
|
interrupts = <20>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
compatible = "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <7>;
|
|
clocks = <&apb1_gates 0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
compatible = "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <8>;
|
|
clocks = <&apb1_gates 1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
compatible = "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <9>;
|
|
clocks = <&apb1_gates 2>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ps20: ps2@01c2a000 {
|
|
compatible = "allwinner,sun4i-a10-ps2";
|
|
reg = <0x01c2a000 0x400>;
|
|
interrupts = <62>;
|
|
clocks = <&apb1_gates 6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ps21: ps2@01c2a400 {
|
|
compatible = "allwinner,sun4i-a10-ps2";
|
|
reg = <0x01c2a400 0x400>;
|
|
interrupts = <63>;
|
|
clocks = <&apb1_gates 7>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|