forked from Minki/linux
a252ccd3d2
The first 128 MiB of RAM can be accessed using an alias at address 0x0. In theory we could access whole RAM using 0x80000000 - 0xbfffffff range (up to 1 GiB) but it doesn't seem to work on Northstar. For some reason (hardware setup left by the bootloader maybe?) 0x80000000 - 0x87ffffff range can't be used. I reproduced this problem on: 1) Buffalo WZR-600DHP2 (BCM47081) 2) Netgear R6250 (BCM4708) 3) D-Link DIR-885L (BCM47094) So it seems we're forced to access first 128 MiB using alias at 0x0 and the rest using real base address + 128 MiB offset which is 0x88000000. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
116 lines
2.2 KiB
Plaintext
116 lines
2.2 KiB
Plaintext
/*
|
|
* Broadcom BCM470X / BCM5301X ARM platform code.
|
|
* DTS for D-Link DIR-885L
|
|
*
|
|
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "bcm47094.dtsi"
|
|
#include "bcm5301x-nand-cs0-bch1.dtsi"
|
|
|
|
/ {
|
|
compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
|
|
model = "D-Link DIR-885L";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200 earlycon";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x00000000 0x08000000
|
|
0x88000000 0x08000000>;
|
|
};
|
|
|
|
nand: nand@18028000 {
|
|
nandcs@0 {
|
|
partition@0 {
|
|
label = "firmware";
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power-white {
|
|
label = "bcm53xx:white:power";
|
|
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
wan-white {
|
|
label = "bcm53xx:white:wan";
|
|
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
power-amber {
|
|
label = "bcm53xx:amber:power";
|
|
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
wan-amber {
|
|
label = "bcm53xx:amber:wan";
|
|
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
usb3-white {
|
|
label = "bcm53xx:white:usb3";
|
|
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
2ghz {
|
|
label = "bcm53xx:white:2ghz";
|
|
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
5ghz {
|
|
label = "bcm53xx:white:5ghz";
|
|
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
wps {
|
|
label = "WPS";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* Switch: router / extender */
|
|
extender {
|
|
label = "Extender";
|
|
linux,code = <BTN_0>;
|
|
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
restart {
|
|
label = "Reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb3 {
|
|
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&spi_nor {
|
|
status = "okay";
|
|
};
|