forked from Minki/linux
efb8d21b2c
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init
221 lines
5.5 KiB
Plaintext
221 lines
5.5 KiB
Plaintext
config H8300
|
|
bool
|
|
default y
|
|
select HAVE_IDE
|
|
select HAVE_GENERIC_HARDIRQS
|
|
select GENERIC_IRQ_SHOW
|
|
|
|
config SYMBOL_PREFIX
|
|
string
|
|
default "_"
|
|
|
|
config MMU
|
|
bool
|
|
default n
|
|
|
|
config SWAP
|
|
bool
|
|
default n
|
|
|
|
config ZONE_DMA
|
|
bool
|
|
default y
|
|
|
|
config FPU
|
|
bool
|
|
default n
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
default n
|
|
|
|
config ARCH_HAS_ILOG2_U32
|
|
bool
|
|
default n
|
|
|
|
config ARCH_HAS_ILOG2_U64
|
|
bool
|
|
default n
|
|
|
|
config GENERIC_HWEIGHT
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_BUG
|
|
bool
|
|
depends on BUG
|
|
|
|
config TIME_LOW_RES
|
|
bool
|
|
default y
|
|
|
|
config NO_IOPORT
|
|
def_bool y
|
|
|
|
config NO_DMA
|
|
def_bool y
|
|
|
|
config ISA
|
|
bool
|
|
default y
|
|
|
|
config PCI
|
|
bool
|
|
default n
|
|
|
|
config HZ
|
|
int
|
|
default 100
|
|
|
|
source "init/Kconfig"
|
|
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
source "arch/h8300/Kconfig.cpu"
|
|
|
|
menu "Executable file formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/base/Kconfig"
|
|
|
|
source "drivers/mtd/Kconfig"
|
|
|
|
source "drivers/block/Kconfig"
|
|
|
|
source "drivers/ide/Kconfig"
|
|
|
|
source "arch/h8300/Kconfig.ide"
|
|
|
|
source "drivers/net/Kconfig"
|
|
|
|
#
|
|
# input - input/joystick depends on it. As does USB.
|
|
#
|
|
source "drivers/input/Kconfig"
|
|
|
|
menu "Character devices"
|
|
|
|
config VT
|
|
bool "Virtual terminal"
|
|
---help---
|
|
If you say Y here, you will get support for terminal devices with
|
|
display and keyboard devices. These are called "virtual" because you
|
|
can run several virtual terminals (also called virtual consoles) on
|
|
one physical terminal. This is rather useful, for example one
|
|
virtual terminal can collect system messages and warnings, another
|
|
one can be used for a text-mode user session, and a third could run
|
|
an X session, all in parallel. Switching between virtual terminals
|
|
is done with certain key combinations, usually Alt-<function key>.
|
|
|
|
The setterm command ("man setterm") can be used to change the
|
|
properties (such as colors or beeping) of a virtual terminal. The
|
|
man page console_codes(4) ("man console_codes") contains the special
|
|
character sequences that can be used to change those properties
|
|
directly. The fonts used on virtual terminals can be changed with
|
|
the setfont ("man setfont") command and the key bindings are defined
|
|
with the loadkeys ("man loadkeys") command.
|
|
|
|
You need at least one virtual terminal device in order to make use
|
|
of your keyboard and monitor. Therefore, only people configuring an
|
|
embedded system would want to say N here in order to save some
|
|
memory; the only way to log into such a system is then via a serial
|
|
or network connection.
|
|
|
|
If unsure, say Y, or else you won't be able to do much with your new
|
|
shiny Linux system :-)
|
|
|
|
config VT_CONSOLE
|
|
bool "Support for console on virtual terminal"
|
|
depends on VT
|
|
---help---
|
|
The system console is the device which receives all kernel messages
|
|
and warnings and which allows logins in single user mode. If you
|
|
answer Y here, a virtual terminal (the device used to interact with
|
|
a physical terminal) can be used as system console. This is the most
|
|
common mode of operations, so you should say Y here unless you want
|
|
the kernel messages be output only to a serial port (in which case
|
|
you should say Y to "Console on serial port", below).
|
|
|
|
If you do say Y here, by default the currently visible virtual
|
|
terminal (/dev/tty0) will be used as system console. You can change
|
|
that with a kernel command line option such as "console=tty3" which
|
|
would use the third virtual terminal as system console. (Try "man
|
|
bootparam" or see the documentation of your boot loader (lilo or
|
|
loadlin) about how to pass options to the kernel at boot time.)
|
|
|
|
If unsure, say Y.
|
|
|
|
config HW_CONSOLE
|
|
bool
|
|
depends on VT
|
|
default y
|
|
|
|
comment "Unix98 PTY support"
|
|
|
|
config UNIX98_PTYS
|
|
bool "Unix98 PTY support"
|
|
---help---
|
|
A pseudo terminal (PTY) is a software device consisting of two
|
|
halves: a master and a slave. The slave device behaves identical to
|
|
a physical terminal; the master device is used by a process to
|
|
read data from and write data to the slave, thereby emulating a
|
|
terminal. Typical programs for the master side are telnet servers
|
|
and xterms.
|
|
|
|
Linux has traditionally used the BSD-like names /dev/ptyxx for
|
|
masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
|
|
has a number of problems. The GNU C library glibc 2.1 and later,
|
|
however, supports the Unix98 naming standard: in order to acquire a
|
|
pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
|
|
terminal is then made available to the process and the pseudo
|
|
terminal slave can be accessed as /dev/pts/<number>. What was
|
|
traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
|
|
|
|
The entries in /dev/pts/ are created on the fly by a virtual
|
|
file system; therefore, if you say Y here you should say Y to
|
|
"/dev/pts file system for Unix98 PTYs" as well.
|
|
|
|
If you want to say Y here, you need to have the C library glibc 2.1
|
|
or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
|
|
Read the instructions in <file:Documentation/Changes> pertaining to
|
|
pseudo terminals. It's safe to say N.
|
|
|
|
source "drivers/char/pcmcia/Kconfig"
|
|
|
|
source "drivers/tty/serial/Kconfig"
|
|
|
|
source "drivers/i2c/Kconfig"
|
|
|
|
source "drivers/hwmon/Kconfig"
|
|
|
|
source "drivers/usb/Kconfig"
|
|
|
|
source "drivers/uwb/Kconfig"
|
|
|
|
endmenu
|
|
|
|
source "drivers/staging/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/h8300/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|