linux/arch/m68k/include/asm/m5307sim.h
Greg Ungerer 909159feb3 m68knommu: make 5307 UART platform addressing consistent
If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5307 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-03-05 09:43:06 +10:00

184 lines
7.0 KiB
C

/****************************************************************************/
/*
* m5307sim.h -- ColdFire 5307 System Integration Module support.
*
* (C) Copyright 1999, Moreton Bay Ventures Pty Ltd.
* (C) Copyright 1999, Lineo (www.lineo.com)
*
* Modified by David W. Miller for the MCF5307 Eval Board.
*/
/****************************************************************************/
#ifndef m5307sim_h
#define m5307sim_h
/****************************************************************************/
#define CPU_NAME "COLDFIRE(m5307)"
#define CPU_INSTR_PER_JIFFY 3
#define MCF_BUSCLK (MCF_CLK / 2)
#include <asm/m53xxacr.h>
/*
* Define the 5307 SIM register set addresses.
*/
#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */
#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */
#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/
#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */
#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
#ifdef CONFIG_OLDMASK
#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */
#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */
#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */
#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */
#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */
#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
#else
#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */
#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */
#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */
#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */
#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */
#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */
#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */
#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */
#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */
#endif /* CONFIG_OLDMASK */
#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */
#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM Addr/Ctrl 0 */
#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM Mask 0 */
#define MCFSIM_DACR1 (MCF_MBAR + 0x110) /* DRAM Addr/Ctrl 1 */
#define MCFSIM_DMR1 (MCF_MBAR + 0x114) /* DRAM Mask 1 */
/*
* Timer module.
*/
#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
#define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
* DMA unit base addresses.
*/
#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */
#define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */
#define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */
#define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */
/*
* UART module.
*/
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE0 (MCF_MBAR + 0x200) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x1c0) /* Base address UART1 */
#else
#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
#endif
/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 16
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
/* Definition offset address for CS2-7 -- old mask 5307 */
#define MCF5307_CS2 (0x400000)
#define MCF5307_CS3 (0x600000)
#define MCF5307_CS4 (0x800000)
#define MCF5307_CS5 (0xA00000)
#define MCF5307_CS6 (0xC00000)
#define MCF5307_CS7 (0xE00000)
/*
* Some symbol defines for the above...
*/
#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
*/
#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
/* Clear to select par I/O */
#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */
/* Clear to select par I/O */
/*
* Defines for the IRQPAR Register
*/
#define IRQ5_LEVEL4 0x80
#define IRQ3_LEVEL6 0x40
#define IRQ1_LEVEL2 0x20
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/****************************************************************************/
#endif /* m5307sim_h */