linux/drivers/ata/pata_pxa.c
Linus Walleij 3e216263ce ata: pxa: Drop <linux/gpio.h> include
This driver does not use GPIO or anything from the GPIO header.
Drop the include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04 17:15:20 -07:00

336 lines
8.5 KiB
C

/*
* Generic PXA PATA driver
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <scsi/scsi_host.h>
#include <linux/platform_data/ata-pxa.h>
#define DRV_NAME "pata_pxa"
#define DRV_VERSION "0.1"
struct pata_pxa_data {
struct dma_chan *dma_chan;
dma_cookie_t dma_cookie;
struct completion dma_done;
};
/*
* DMA interrupt handler.
*/
static void pxa_ata_dma_irq(void *d)
{
struct pata_pxa_data *pd = d;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL);
if (status == DMA_ERROR || status == DMA_COMPLETE)
complete(&pd->dma_done);
}
/*
* Prepare taskfile for submission.
*/
static void pxa_qc_prep(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
struct dma_async_tx_descriptor *tx;
enum dma_transfer_direction dir;
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
dir = (qc->dma_dir == DMA_TO_DEVICE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
tx = dmaengine_prep_slave_sg(pd->dma_chan, qc->sg, qc->n_elem, dir,
DMA_PREP_INTERRUPT);
if (!tx) {
ata_dev_err(qc->dev, "prep_slave_sg() failed\n");
return;
}
tx->callback = pxa_ata_dma_irq;
tx->callback_param = pd;
pd->dma_cookie = dmaengine_submit(tx);
}
/*
* Configure the DMA controller, load the DMA descriptors, but don't start the
* DMA controller yet. Only issue the ATA command.
*/
static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
{
qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
}
/*
* Execute the DMA transfer.
*/
static void pxa_bmdma_start(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
init_completion(&pd->dma_done);
dma_async_issue_pending(pd->dma_chan);
}
/*
* Wait until the DMA transfer completes, then stop the DMA controller.
*/
static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL);
if (status != DMA_ERROR && status != DMA_COMPLETE &&
wait_for_completion_timeout(&pd->dma_done, HZ))
ata_dev_err(qc->dev, "Timeout waiting for DMA completion!");
dmaengine_terminate_all(pd->dma_chan);
}
/*
* Read DMA status. The bmdma_stop() will take care of properly finishing the
* DMA transfer so we always have DMA-complete interrupt here.
*/
static unsigned char pxa_bmdma_status(struct ata_port *ap)
{
struct pata_pxa_data *pd = ap->private_data;
unsigned char ret = ATA_DMA_INTR;
struct dma_tx_state state;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, &state);
if (status != DMA_COMPLETE)
ret |= ATA_DMA_ERR;
return ret;
}
/*
* No IRQ register present so we do nothing.
*/
static void pxa_irq_clear(struct ata_port *ap)
{
}
/*
* Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
* unclear why ATAPI has DMA issues.
*/
static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
{
return -EOPNOTSUPP;
}
static struct scsi_host_template pxa_ata_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pxa_ata_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.bmdma_setup = pxa_bmdma_setup,
.bmdma_start = pxa_bmdma_start,
.bmdma_stop = pxa_bmdma_stop,
.bmdma_status = pxa_bmdma_status,
.check_atapi_dma = pxa_check_atapi_dma,
.sff_irq_clear = pxa_irq_clear,
.qc_prep = pxa_qc_prep,
};
static int pxa_ata_probe(struct platform_device *pdev)
{
struct ata_host *host;
struct ata_port *ap;
struct pata_pxa_data *data;
struct resource *cmd_res;
struct resource *ctl_res;
struct resource *dma_res;
struct resource *irq_res;
struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
struct dma_slave_config config;
int ret = 0;
/*
* Resource validation, three resources are needed:
* - CMD port base address
* - CTL port base address
* - DMA port base address
* - IRQ pin
*/
if (pdev->num_resources != 4) {
dev_err(&pdev->dev, "invalid number of resources\n");
return -EINVAL;
}
/*
* CMD port base address
*/
cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(cmd_res == NULL))
return -EINVAL;
/*
* CTL port base address
*/
ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (unlikely(ctl_res == NULL))
return -EINVAL;
/*
* DMA port base address
*/
dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (unlikely(dma_res == NULL))
return -EINVAL;
/*
* IRQ pin
*/
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(irq_res == NULL))
return -EINVAL;
/*
* Allocate the host
*/
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
return -ENOMEM;
ap = host->ports[0];
ap->ops = &pxa_ata_port_ops;
ap->pio_mask = ATA_PIO4;
ap->mwdma_mask = ATA_MWDMA2;
ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start,
resource_size(cmd_res));
ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
resource_size(ctl_res));
ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start,
resource_size(dma_res));
/*
* Adjust register offsets
*/
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
ap->ioaddr.data_addr = ap->ioaddr.cmd_addr +
(ATA_REG_DATA << pdata->reg_shift);
ap->ioaddr.error_addr = ap->ioaddr.cmd_addr +
(ATA_REG_ERR << pdata->reg_shift);
ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
(ATA_REG_FEATURE << pdata->reg_shift);
ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr +
(ATA_REG_NSECT << pdata->reg_shift);
ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAL << pdata->reg_shift);
ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAM << pdata->reg_shift);
ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAH << pdata->reg_shift);
ap->ioaddr.device_addr = ap->ioaddr.cmd_addr +
(ATA_REG_DEVICE << pdata->reg_shift);
ap->ioaddr.status_addr = ap->ioaddr.cmd_addr +
(ATA_REG_STATUS << pdata->reg_shift);
ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
(ATA_REG_CMD << pdata->reg_shift);
/*
* Allocate and load driver's internal data structure
*/
data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
ap->private_data = data;
memset(&config, 0, sizeof(config));
config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.src_addr = dma_res->start;
config.dst_addr = dma_res->start;
config.src_maxburst = 32;
config.dst_maxburst = 32;
/*
* Request the DMA channel
*/
data->dma_chan =
dma_request_slave_channel(&pdev->dev, "data");
if (!data->dma_chan)
return -EBUSY;
ret = dmaengine_slave_config(data->dma_chan, &config);
if (ret < 0) {
dev_err(&pdev->dev, "dma configuration failed: %d\n", ret);
return ret;
}
/*
* Activate the ATA host
*/
ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
pdata->irq_flags, &pxa_ata_sht);
if (ret)
dma_release_channel(data->dma_chan);
return ret;
}
static int pxa_ata_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct pata_pxa_data *data = host->ports[0]->private_data;
dma_release_channel(data->dma_chan);
ata_host_detach(host);
return 0;
}
static struct platform_driver pxa_ata_driver = {
.probe = pxa_ata_probe,
.remove = pxa_ata_remove,
.driver = {
.name = DRV_NAME,
},
};
module_platform_driver(pxa_ata_driver);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_NAME);