linux/drivers/usb
Dan Williams 7ad3c47088 usb: block suspension of superspeed port while hispeed peer is active
ClearPortFeature(PORT_POWER) on a usb3 port places the port in either a
DSPORT.Powered-off-detect / DSPORT.Powered-off-reset loop, or the
DSPORT.Powered-off state.  There is no way to ensure that RX
terminations will persist in this state, so it is possible a device will
degrade to its usb2 connection.  Prevent this by blocking power-off of a
usb3 port while its usb2 peer is active, and powering on a usb3 port
before its usb2 peer.

By default the latency between peer power-on events is 0.  In order for
the device to not see usb2 active while usb3 is still powering up inject
the hub recommended power_on_good delay.  In support of satisfying the
power_on_good delay outside of hub_power_on() refactor the places where
the delay is consumed to call a new hub_power_on_good_delay() helper.

Finally, because this introduces several new checks for whether a port
is_superspeed, cache that disctinction at port creation so that we don't
need to keep looking up the parent hub device.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
[alan]: add a 'superspeed' flag to the port
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 16:38:53 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: udc: update gadget states according to ch9 2014-05-23 11:36:44 +09:00
class USB: usbtmc: fix DMA on stack 2014-05-27 16:03:57 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core usb: block suspension of superspeed port while hispeed peer is active 2014-05-27 16:38:53 -07:00
dwc2 usb: dwc2: Add function to calculate correct FIFO sizes 2014-05-27 15:42:42 -07:00
dwc3 usb: patches for v3.16 merge window 2014-05-23 11:28:21 +09:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: gadget: rename CONFIG_USB_GADGET_PXA25X 2014-05-27 16:25:32 -07:00
host usb: pci_quirks: fix sparse 'symbol not declared' warning 2014-05-27 16:25:32 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc usb: usbtest: add pattern check on pipe in phase of unlink read 2014-05-27 16:23:43 -07:00
mon
musb usb: patches for v3.16 merge window 2014-05-23 11:28:21 +09:00
phy phy: Enable USB PHY support for arm64 2014-05-27 15:58:13 -07:00
renesas_usbhs usb: changes for v3.14 merge window 2014-01-03 12:15:10 -08:00
serial USB: keyspan: fix potential null pointer dereference 2014-05-27 15:14:13 -07:00
storage USB: storage: ene_ub6250: Use kmemdup instead of kmalloc + memcpy 2014-05-27 16:23:44 -07:00
wusbcore USB: wusbcore: fix control-pipe directions 2014-05-27 15:04:10 -07:00
Kconfig usb: host: remove USB_ARCH_HAS_?HCI 2014-02-18 12:36:38 -08:00
Makefile usb: move usb/usb-common.c to usb/common/usb-common.c 2014-05-27 15:29:44 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.