forked from Minki/linux
9eb0e5f9b2
The DAI mode is and should be configured by the sound card driver as codec and ssi have to be in the right modes to communicate with each other. It is possible to operate the ssi unit or the codec in master mode, sometimes even on the same board in different configurations. With the latest changes in the fsl-ssi driver, the 'fsl,mode' property is only handled as a fallback property. If the sound card sets the DAI mode correctly, this fallback configuration is dropped. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
427 lines
9.0 KiB
Plaintext
427 lines
9.0 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x10000000 0x40000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_2p5v: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "2P5V";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_otg_vbus: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
power {
|
|
label = "Power Button";
|
|
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
menu {
|
|
label = "Menu";
|
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_MENU>;
|
|
};
|
|
|
|
home {
|
|
label = "Home";
|
|
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_HOME>;
|
|
};
|
|
|
|
back {
|
|
label = "Back";
|
|
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_BACK>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx6q-sabrelite-sgtl5000";
|
|
ssi-controller = <&ssi1>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <1>;
|
|
mux-ext-port = <4>;
|
|
};
|
|
|
|
backlight_lcd {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
backlight_lvds {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm4 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi1 {
|
|
fsl,spi-num-chipselects = <1>;
|
|
cs-gpios = <&gpio3 19 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
status = "okay";
|
|
|
|
flash: m25p80@0 {
|
|
compatible = "sst,sst25vf016b";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
phy-mode = "rgmii";
|
|
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
|
|
txen-skew-ps = <0>;
|
|
txc-skew-ps = <3000>;
|
|
rxdv-skew-ps = <0>;
|
|
rxc-skew-ps = <3000>;
|
|
rxd0-skew-ps = <0>;
|
|
rxd1-skew-ps = <0>;
|
|
rxd2-skew-ps = <0>;
|
|
rxd3-skew-ps = <0>;
|
|
txd0-skew-ps = <0>;
|
|
txd1-skew-ps = <0>;
|
|
txd2-skew-ps = <0>;
|
|
txd3-skew-ps = <0>;
|
|
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
codec: sgtl5000@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clks 201>;
|
|
VDDA-supply = <®_2p5v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx6q-sabrelite {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
/* SGTL5000 sys_mclk */
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
|
|
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
|
|
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
|
|
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet: enetgrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
|
/* Phy reset */
|
|
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
|
|
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpio_keysgrp {
|
|
fsl,pins = <
|
|
/* Power Button */
|
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
|
/* Menu Button */
|
|
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
|
|
/* Home Button */
|
|
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
|
/* Back Button */
|
|
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
|
/* Volume Up Button */
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
|
/* Volume Down Button */
|
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm4: pwm4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
|
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
|
|
/* power enable, high active */
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
|
|
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ldb {
|
|
status = "okay";
|
|
|
|
lvds-channel@0 {
|
|
fsl,data-mapping = "spwg";
|
|
fsl,data-width = <18>;
|
|
status = "okay";
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: hsd100pxn1 {
|
|
clock-frequency = <65000000>;
|
|
hactive = <1024>;
|
|
vactive = <768>;
|
|
hback-porch = <220>;
|
|
hfront-porch = <40>;
|
|
vback-porch = <21>;
|
|
vfront-porch = <7>;
|
|
hsync-len = <60>;
|
|
vsync-len = <10>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
cd-gpios = <&gpio7 0 0>;
|
|
wp-gpios = <&gpio7 1 0>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
cd-gpios = <&gpio2 6 0>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|