linux/drivers/iio
Alexandru Tachici 79ef91493f iio: adc: ad7124: Set IRQ type to falling
Ad7124 data-sheet specifies that the falling edge
of the DOUT line should be used for an interrupt.
The current irq flag (IRQF_TRIGGER_LOW) used will
cause unwanted behaviour. When enabling the interrupt
it will fire once because the DOUT line is already low.
This will make the driver to read an unfinished conversion
from the chip.

This patch sets the irq type to the one specified in
the data-sheet.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18 11:43:16 +00:00
..
accel iio: st_sensors: Make use of device properties 2020-01-13 21:53:39 +00:00
adc iio: adc: ad7124: Set IRQ type to falling 2020-01-18 11:43:16 +00:00
afe treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
amplifiers Second set of IIO device support, features, cleanups and minor fixes for 5.3. 2019-07-01 10:58:13 +02:00
buffer iio: buffer: rename 'read_first_n' callback to 'read' 2019-12-29 15:20:09 +00:00
chemical iio: chemical: atlas-sensor: add helper function atlas_buffer_num_channels() 2020-01-12 11:34:16 +00:00
common iio: st_sensors: Make use of device properties 2020-01-13 21:53:39 +00:00
dac iio: ad5592r: Drop surplus GPIO header 2019-12-15 11:42:16 +00:00
dummy spi: docs: convert to ReST and add it to the kABI bookset 2019-07-31 14:13:13 -06:00
frequency iio: adf4350: Convert to use GPIO descriptor 2019-12-15 11:42:16 +00:00
gyro iio: st_sensors: Make use of device properties 2020-01-13 21:53:39 +00:00
health treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
humidity iio: humidity: dht11 remove TODO since it doesn't make sense 2020-01-12 11:34:15 +00:00
imu iio: imu: adis: use new delay structure for SPI transfer delays 2020-01-13 22:03:36 +00:00
light First set of new device support, features and cleanups for IIO in the 5.6 cycle 2020-01-10 10:44:00 +01:00
magnetometer iio: st_sensors: Make use of device properties 2020-01-13 21:53:39 +00:00
multiplexer treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
orientation treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 2019-06-05 17:37:04 +02:00
potentiometer iio: potentiometer: add a driver for Maxim 5432-5435 2019-08-05 14:25:08 +01:00
potentiostat treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
pressure iio: st_sensors: Make use of device properties 2020-01-13 21:53:39 +00:00
proximity iio: as3935: Drop GPIO includes 2019-12-15 11:42:15 +00:00
resolver iio: ad2s1200: Drop legacy include 2019-12-15 11:42:15 +00:00
temperature First set of new device support, features and cleanups for IIO in the 5.6 cycle 2020-01-10 10:44:00 +01:00
trigger iio: trigger: stm32-timer: remove unnecessary update event 2019-12-01 10:20:21 +00:00
iio_core_trigger.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
iio_core.h iio: buffer: rename 'read_first_n' callback to 'read' 2019-12-29 15:20:09 +00:00
industrialio-buffer.c iio: buffer: rename 'read_first_n' callback to 'read' 2019-12-29 15:20:09 +00:00
industrialio-configfs.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-core.c First set of new device support, features and cleanups for IIO in the 5.6 cycle 2020-01-10 10:44:00 +01:00
industrialio-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-device.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-sw-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-trigger.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
industrialio-triggered-event.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
inkern.c Driver Core and debugfs changes for 5.3-rc1 2019-07-12 12:24:03 -07:00
Kconfig Second set of IIO device support, features, cleanups and minor fixes for 5.3. 2019-07-01 10:58:13 +02:00
Makefile counter: stm32-lptimer: add counter device 2019-04-25 21:33:41 +02:00