forked from Minki/linux
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
352 lines
12 KiB
C
352 lines
12 KiB
C
/*******************************************************************************
|
|
*
|
|
* (c) 1998 by Computone Corporation
|
|
*
|
|
********************************************************************************
|
|
*
|
|
*
|
|
* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
|
|
* serial I/O controllers.
|
|
*
|
|
* DESCRIPTION: Header file for high level library functions
|
|
*
|
|
*******************************************************************************/
|
|
#ifndef I2LIB_H
|
|
#define I2LIB_H 1
|
|
//------------------------------------------------------------------------------
|
|
// I2LIB.H
|
|
//
|
|
// IntelliPort-II and IntelliPort-IIEX
|
|
//
|
|
// Defines, structure definitions, and external declarations for i2lib.c
|
|
//------------------------------------------------------------------------------
|
|
//--------------------------------------
|
|
// Mandatory Includes:
|
|
//--------------------------------------
|
|
#include "ip2types.h"
|
|
#include "i2ellis.h"
|
|
#include "i2pack.h"
|
|
#include "i2cmd.h"
|
|
#include <linux/workqueue.h>
|
|
|
|
//------------------------------------------------------------------------------
|
|
// i2ChanStr -- Channel Structure:
|
|
// Used to track per-channel information for the library routines using standard
|
|
// loadware. Note also, a pointer to an array of these structures is patched
|
|
// into the i2eBordStr (see i2ellis.h)
|
|
//------------------------------------------------------------------------------
|
|
//
|
|
// If we make some limits on the maximum block sizes, we can avoid dealing with
|
|
// buffer wrap. The wrapping of the buffer is based on where the start of the
|
|
// packet is. Then there is always room for the packet contiguously.
|
|
//
|
|
// Maximum total length of an outgoing data or in-line command block. The limit
|
|
// of 36 on data is quite arbitrary and based more on DOS memory limitations
|
|
// than the board interface. However, for commands, the maximum packet length is
|
|
// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits
|
|
// (see I2PACK.H) in such packets. For data packets, the count field size is not
|
|
// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE,
|
|
// but be careful if wanting to modify either.
|
|
//
|
|
#define MAX_OBUF_BLOCK 36
|
|
|
|
// Another note on maximum block sizes: we are buffering packets here. Data is
|
|
// put into the buffer (if there is room) regardless of the credits from the
|
|
// board. The board sends new credits whenever it has removed from his buffers a
|
|
// number of characters equal to 80% of total buffer size. (Of course, the total
|
|
// buffer size is what is reported when the very first set of flow control
|
|
// status packets are received from the board. Therefore, to be robust, you must
|
|
// always fill the board to at least 80% of the current credit limit, else you
|
|
// might not give it enough to trigger a new report. These conditions are
|
|
// obtained here so long as the maximum output block size is less than 20% the
|
|
// size of the board's output buffers. This is true at present by "coincidence"
|
|
// or "infernal knowledge": the board's output buffers are at least 700 bytes
|
|
// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest
|
|
// strategy might be to trap the first flow control report and guarantee that
|
|
// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first
|
|
// reported buffer credit.
|
|
//
|
|
#define MAX_CBUF_BLOCK 6 // Maximum total length of a bypass command block
|
|
|
|
#define IBUF_SIZE 512 // character capacity of input buffer per channel
|
|
#define OBUF_SIZE 1024// character capacity of output buffer per channel
|
|
#define CBUF_SIZE 10 // character capacity of output bypass buffer
|
|
|
|
typedef struct _i2ChanStr
|
|
{
|
|
// First, back-pointers so that given a pointer to this structure, you can
|
|
// determine the correct board and channel number to reference, (say, when
|
|
// issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.)
|
|
|
|
int port_index; // Index of port in channel structure array attached
|
|
// to board structure.
|
|
PTTY pTTY; // Pointer to tty structure for port (OS specific)
|
|
USHORT validity; // Indicates whether the given channel has been
|
|
// initialized, really exists (or is a missing
|
|
// channel, e.g. channel 9 on an 8-port box.)
|
|
|
|
i2eBordStrPtr pMyBord; // Back-pointer to this channel's board structure
|
|
|
|
int wopen; // waiting fer carrier
|
|
|
|
int throttled; // Set if upper layer can take no data
|
|
|
|
int flags; // Defined in tty.h
|
|
|
|
PWAITQ open_wait; // Pointer for OS sleep function.
|
|
PWAITQ close_wait; // Pointer for OS sleep function.
|
|
PWAITQ delta_msr_wait;// Pointer for OS sleep function.
|
|
PWAITQ dss_now_wait; // Pointer for OS sleep function.
|
|
|
|
struct timer_list BookmarkTimer; // Used by i2DrainOutput
|
|
wait_queue_head_t pBookmarkWait; // Used by i2DrainOutput
|
|
|
|
int BaudBase;
|
|
int BaudDivisor;
|
|
|
|
USHORT ClosingDelay;
|
|
USHORT ClosingWaitTime;
|
|
|
|
volatile
|
|
flowIn infl; // This structure is initialized as a completely
|
|
// formed flow-control command packet, and as such
|
|
// has the channel number, also the capacity and
|
|
// "as-of" data needed continuously.
|
|
|
|
USHORT sinceLastFlow; // Counts the number of characters read from input
|
|
// buffers, since the last time flow control info
|
|
// was sent.
|
|
|
|
USHORT whenSendFlow; // Determines when new flow control is to be sent to
|
|
// the board. Note unlike earlier manifestations of
|
|
// the driver, these packets can be sent from
|
|
// in-place.
|
|
|
|
USHORT channelNeeds; // Bit map of important things which must be done
|
|
// for this channel. (See bits below )
|
|
|
|
volatile
|
|
flowStat outfl; // Same type of structure is used to hold current
|
|
// flow control information used to control our
|
|
// output. "asof" is kept updated as data is sent,
|
|
// and "room" never goes to zero.
|
|
|
|
// The incoming ring buffer
|
|
// Unlike the outgoing buffers, this holds raw data, not packets. The two
|
|
// extra bytes are used to hold the byte-padding when there is room for an
|
|
// odd number of bytes before we must wrap.
|
|
//
|
|
UCHAR Ibuf[IBUF_SIZE + 2];
|
|
volatile
|
|
USHORT Ibuf_stuff; // Stuffing index
|
|
volatile
|
|
USHORT Ibuf_strip; // Stripping index
|
|
|
|
// The outgoing ring-buffer: Holds Data and command packets. N.B., even
|
|
// though these are in the channel structure, the channel is also written
|
|
// here, the easier to send it to the fifo when ready. HOWEVER, individual
|
|
// packets here are NOT padded to even length: the routines for writing
|
|
// blocks to the fifo will pad to even byte counts.
|
|
//
|
|
UCHAR Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4];
|
|
volatile
|
|
USHORT Obuf_stuff; // Stuffing index
|
|
volatile
|
|
USHORT Obuf_strip; // Stripping index
|
|
int Obuf_char_count;
|
|
|
|
// The outgoing bypass-command buffer. Unlike earlier manifestations, the
|
|
// flow control packets are sent directly from the structures. As above, the
|
|
// channel number is included in the packet, but they are NOT padded to even
|
|
// size.
|
|
//
|
|
UCHAR Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2];
|
|
volatile
|
|
USHORT Cbuf_stuff; // Stuffing index
|
|
volatile
|
|
USHORT Cbuf_strip; // Stripping index
|
|
|
|
// The temporary buffer for the Linux tty driver PutChar entry.
|
|
//
|
|
UCHAR Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)];
|
|
volatile
|
|
USHORT Pbuf_stuff; // Stuffing index
|
|
|
|
// The state of incoming data-set signals
|
|
//
|
|
USHORT dataSetIn; // Bit-mapped according to below. Also indicates
|
|
// whether a break has been detected since last
|
|
// inquiry.
|
|
|
|
// The state of outcoming data-set signals (as far as we can tell!)
|
|
//
|
|
USHORT dataSetOut; // Bit-mapped according to below.
|
|
|
|
// Most recent hot-key identifier detected
|
|
//
|
|
USHORT hotKeyIn; // Hot key as sent by the board, HOT_CLEAR indicates
|
|
// no hot key detected since last examined.
|
|
|
|
// Counter of outstanding requests for bookmarks
|
|
//
|
|
short bookMarks; // Number of outstanding bookmark requests, (+ive
|
|
// whenever a bookmark request if queued up, -ive
|
|
// whenever a bookmark is received).
|
|
|
|
// Misc options
|
|
//
|
|
USHORT channelOptions; // See below
|
|
|
|
// To store various incoming special packets
|
|
//
|
|
debugStat channelStatus;
|
|
cntStat channelRcount;
|
|
cntStat channelTcount;
|
|
failStat channelFail;
|
|
|
|
// To store the last values for line characteristics we sent to the board.
|
|
//
|
|
int speed;
|
|
|
|
int flush_flags;
|
|
|
|
void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...);
|
|
|
|
/*
|
|
* Kernel counters for the 4 input interrupts
|
|
*/
|
|
struct async_icount icount;
|
|
|
|
/*
|
|
* Task queues for processing input packets from the board.
|
|
*/
|
|
struct work_struct tqueue_input;
|
|
struct work_struct tqueue_status;
|
|
struct work_struct tqueue_hangup;
|
|
|
|
rwlock_t Ibuf_spinlock;
|
|
rwlock_t Obuf_spinlock;
|
|
rwlock_t Cbuf_spinlock;
|
|
rwlock_t Pbuf_spinlock;
|
|
|
|
} i2ChanStr, *i2ChanStrPtr;
|
|
|
|
//---------------------------------------------------
|
|
// Manifests and bit-maps for elements in i2ChanStr
|
|
//---------------------------------------------------
|
|
//
|
|
// flush flags
|
|
//
|
|
#define STARTFL_FLAG 1
|
|
#define STOPFL_FLAG 2
|
|
|
|
// validity
|
|
//
|
|
#define CHANNEL_MAGIC_BITS 0xff00
|
|
#define CHANNEL_MAGIC 0x5300 // (validity & CHANNEL_MAGIC_BITS) ==
|
|
// CHANNEL_MAGIC --> structure good
|
|
|
|
#define CHANNEL_SUPPORT 0x0001 // Indicates channel is supported, exists,
|
|
// and passed P.O.S.T.
|
|
|
|
// channelNeeds
|
|
//
|
|
#define NEED_FLOW 1 // Indicates flow control has been queued
|
|
#define NEED_INLINE 2 // Indicates inline commands or data queued
|
|
#define NEED_BYPASS 4 // Indicates bypass commands queued
|
|
#define NEED_CREDIT 8 // Indicates would be sending except has not sufficient
|
|
// credit. The data is still in the channel structure,
|
|
// but the channel is not enqueued in the board
|
|
// structure again until there is a credit received from
|
|
// the board.
|
|
|
|
// dataSetIn (Also the bits for i2GetStatus return value)
|
|
//
|
|
#define I2_DCD 1
|
|
#define I2_CTS 2
|
|
#define I2_DSR 4
|
|
#define I2_RI 8
|
|
|
|
// dataSetOut (Also the bits for i2GetStatus return value)
|
|
//
|
|
#define I2_DTR 1
|
|
#define I2_RTS 2
|
|
|
|
// i2GetStatus() can optionally clear these bits
|
|
//
|
|
#define I2_BRK 0x10 // A break was detected
|
|
#define I2_PAR 0x20 // A parity error was received
|
|
#define I2_FRA 0x40 // A framing error was received
|
|
#define I2_OVR 0x80 // An overrun error was received
|
|
|
|
// i2GetStatus() automatically clears these bits */
|
|
//
|
|
#define I2_DDCD 0x100 // DCD changed from its former value
|
|
#define I2_DCTS 0x200 // CTS changed from its former value
|
|
#define I2_DDSR 0x400 // DSR changed from its former value
|
|
#define I2_DRI 0x800 // RI changed from its former value
|
|
|
|
// hotKeyIn
|
|
//
|
|
#define HOT_CLEAR 0x1322 // Indicates that no hot-key has been detected
|
|
|
|
// channelOptions
|
|
//
|
|
#define CO_NBLOCK_WRITE 1 // Writes don't block waiting for buffer. (Default
|
|
// is, they do wait.)
|
|
|
|
// fcmodes
|
|
//
|
|
#define I2_OUTFLOW_CTS 0x0001
|
|
#define I2_INFLOW_RTS 0x0002
|
|
#define I2_INFLOW_DSR 0x0004
|
|
#define I2_INFLOW_DTR 0x0008
|
|
#define I2_OUTFLOW_DSR 0x0010
|
|
#define I2_OUTFLOW_DTR 0x0020
|
|
#define I2_OUTFLOW_XON 0x0040
|
|
#define I2_OUTFLOW_XANY 0x0080
|
|
#define I2_INFLOW_XON 0x0100
|
|
|
|
#define I2_CRTSCTS (I2_OUTFLOW_CTS|I2_INFLOW_RTS)
|
|
#define I2_IXANY_MODE (I2_OUTFLOW_XON|I2_OUTFLOW_XANY)
|
|
|
|
//-------------------------------------------
|
|
// Macros used from user level like functions
|
|
//-------------------------------------------
|
|
|
|
// Macros to set and clear channel options
|
|
//
|
|
#define i2SetOption(pCh, option) pCh->channelOptions |= option
|
|
#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option
|
|
|
|
// Macro to set fatal-error trap
|
|
//
|
|
#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine
|
|
|
|
//--------------------------------------------
|
|
// Declarations and prototypes for i2lib.c
|
|
//--------------------------------------------
|
|
//
|
|
static int i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr);
|
|
static int i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...);
|
|
static int i2GetStatus(i2ChanStrPtr, int);
|
|
static int i2Input(i2ChanStrPtr);
|
|
static int i2InputFlush(i2ChanStrPtr);
|
|
static int i2Output(i2ChanStrPtr, const char *, int, int);
|
|
static int i2OutputFree(i2ChanStrPtr);
|
|
static int i2ServiceBoard(i2eBordStrPtr);
|
|
static void i2DrainOutput(i2ChanStrPtr, int);
|
|
|
|
#ifdef IP2DEBUG_TRACE
|
|
void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...);
|
|
#else
|
|
#define ip2trace(a,b,c,d...) do {} while (0)
|
|
#endif
|
|
|
|
// Argument to i2QueueCommands
|
|
//
|
|
#define C_IN_LINE 1
|
|
#define C_BYPASS 0
|
|
|
|
#endif // I2LIB_H
|