linux/arch/arm/boot/dts/ecx-common.dtsi
Mark Langsdorf d50b110f14 sata highbank: add bit-banged SGPIO driver support
Highbank supports SGPIO by bit-banging out the SGPIO signals over
three GPIO pins defined in the DTB. Add support for this SGPIO
functionality.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-06 14:05:24 -07:00

240 lines
5.2 KiB
Plaintext

/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/ {
chosen {
bootargs = "console=ttyAMA0";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
dma-coherent;
calxeda,port-phys = <&combophy5 0 &combophy0 0
&combophy0 1 &combophy0 2
&combophy0 3>;
calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
calxeda,led-order = <4 0 1 2 3>;
};
sdhci@ffe0e000 {
compatible = "calxeda,hb-sdhci";
reg = <0xffe0e000 0x1000>;
interrupts = <0 90 4>;
clocks = <&eclk>;
status = "disabled";
};
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
interrupts = <0 7 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpioe: gpio@fff30000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpiof: gpio@fff31000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpiog: gpio@fff32000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
gpioh: gpio@fff33000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
status = "disabled";
};
timer@fff34000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0xfff34000 0x1000>;
interrupts = <0 18 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
rtc@fff35000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0xfff35000 0x1000>;
interrupts = <0 19 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfff36000 0x1000>;
interrupts = <0 20 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};
sregs@fff3c000 {
compatible = "calxeda,hb-sregs";
reg = <0xfff3c000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <33333000>;
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x108>;
};
a9pll: a9pll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x100>;
};
a9periphclk: a9periphclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9periph-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
a9bclk: a9bclk {
#clock-cells = <0>;
compatible = "calxeda,hb-a9bus-clock";
clocks = <&a9pll>;
reg = <0x104>;
};
emmcpll: emmcpll {
#clock-cells = <0>;
compatible = "calxeda,hb-pll-clock";
clocks = <&osc>;
reg = <0x10C>;
};
eclk: eclk {
#clock-cells = <0>;
compatible = "calxeda,hb-emmc-clock";
clocks = <&emmcpll>;
reg = <0x114>;
};
pclk: pclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <150000000>;
};
};
};
dma@fff3d000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
dma-coherent;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
dma-coherent;
};
combophy0: combo-phy@fff58000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff58000 0x1000>;
phydev = <5>;
};
combophy5: combo-phy@fff5d000 {
compatible = "calxeda,hb-combophy";
#phy-cells = <1>;
reg = <0xfff5d000 0x1000>;
phydev = <31>;
};
};
};