forked from Minki/linux
8553bcad3e
If the property was not specified then the returned resource had a
resource_size(..) == 1, rather than 0. The PCI-E driver checks for 0 so it
blindly continues on with a corrupted resource.
The regression was introduced into v3.12 by:
11be654
PCI: mvebu: Adapt to the new device tree layout
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
946 lines
25 KiB
C
946 lines
25 KiB
C
/*
|
|
* Address map functions for Marvell EBU SoCs (Kirkwood, Armada
|
|
* 370/XP, Dove, Orion5x and MV78xx0)
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* The Marvell EBU SoCs have a configurable physical address space:
|
|
* the physical address at which certain devices (PCIe, NOR, NAND,
|
|
* etc.) sit can be configured. The configuration takes place through
|
|
* two sets of registers:
|
|
*
|
|
* - One to configure the access of the CPU to the devices. Depending
|
|
* on the families, there are between 8 and 20 configurable windows,
|
|
* each can be use to create a physical memory window that maps to a
|
|
* specific device. Devices are identified by a tuple (target,
|
|
* attribute).
|
|
*
|
|
* - One to configure the access to the CPU to the SDRAM. There are
|
|
* either 2 (for Dove) or 4 (for other families) windows to map the
|
|
* SDRAM into the physical address space.
|
|
*
|
|
* This driver:
|
|
*
|
|
* - Reads out the SDRAM address decoding windows at initialization
|
|
* time, and fills the mvebu_mbus_dram_info structure with these
|
|
* informations. The exported function mv_mbus_dram_info() allow
|
|
* device drivers to get those informations related to the SDRAM
|
|
* address decoding windows. This is because devices also have their
|
|
* own windows (configured through registers that are part of each
|
|
* device register space), and therefore the drivers for Marvell
|
|
* devices have to configure those device -> SDRAM windows to ensure
|
|
* that DMA works properly.
|
|
*
|
|
* - Provides an API for platform code or device drivers to
|
|
* dynamically add or remove address decoding windows for the CPU ->
|
|
* device accesses. This API is mvebu_mbus_add_window_by_id(),
|
|
* mvebu_mbus_add_window_remap_by_id() and
|
|
* mvebu_mbus_del_window().
|
|
*
|
|
* - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
|
|
* see the list of CPU -> SDRAM windows and their configuration
|
|
* (file 'sdram') and the list of CPU -> devices windows and their
|
|
* configuration (file 'devices').
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
/*
|
|
* DDR target is the same on all platforms.
|
|
*/
|
|
#define TARGET_DDR 0
|
|
|
|
/*
|
|
* CPU Address Decode Windows registers
|
|
*/
|
|
#define WIN_CTRL_OFF 0x0000
|
|
#define WIN_CTRL_ENABLE BIT(0)
|
|
#define WIN_CTRL_TGT_MASK 0xf0
|
|
#define WIN_CTRL_TGT_SHIFT 4
|
|
#define WIN_CTRL_ATTR_MASK 0xff00
|
|
#define WIN_CTRL_ATTR_SHIFT 8
|
|
#define WIN_CTRL_SIZE_MASK 0xffff0000
|
|
#define WIN_CTRL_SIZE_SHIFT 16
|
|
#define WIN_BASE_OFF 0x0004
|
|
#define WIN_BASE_LOW 0xffff0000
|
|
#define WIN_BASE_HIGH 0xf
|
|
#define WIN_REMAP_LO_OFF 0x0008
|
|
#define WIN_REMAP_LOW 0xffff0000
|
|
#define WIN_REMAP_HI_OFF 0x000c
|
|
|
|
#define ATTR_HW_COHERENCY (0x1 << 4)
|
|
|
|
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
|
|
#define DDR_BASE_CS_HIGH_MASK 0xf
|
|
#define DDR_BASE_CS_LOW_MASK 0xff000000
|
|
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
|
|
#define DDR_SIZE_ENABLED BIT(0)
|
|
#define DDR_SIZE_CS_MASK 0x1c
|
|
#define DDR_SIZE_CS_SHIFT 2
|
|
#define DDR_SIZE_MASK 0xff000000
|
|
|
|
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
|
|
|
|
struct mvebu_mbus_state;
|
|
|
|
struct mvebu_mbus_soc_data {
|
|
unsigned int num_wins;
|
|
unsigned int num_remappable_wins;
|
|
unsigned int (*win_cfg_offset)(const int win);
|
|
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
|
|
int (*show_cpu_target)(struct mvebu_mbus_state *s,
|
|
struct seq_file *seq, void *v);
|
|
};
|
|
|
|
struct mvebu_mbus_state {
|
|
void __iomem *mbuswins_base;
|
|
void __iomem *sdramwins_base;
|
|
struct dentry *debugfs_root;
|
|
struct dentry *debugfs_sdram;
|
|
struct dentry *debugfs_devs;
|
|
struct resource pcie_mem_aperture;
|
|
struct resource pcie_io_aperture;
|
|
const struct mvebu_mbus_soc_data *soc;
|
|
int hw_io_coherency;
|
|
};
|
|
|
|
static struct mvebu_mbus_state mbus_state;
|
|
|
|
static struct mbus_dram_target_info mvebu_mbus_dram_info;
|
|
const struct mbus_dram_target_info *mv_mbus_dram_info(void)
|
|
{
|
|
return &mvebu_mbus_dram_info;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
|
|
|
|
/*
|
|
* Functions to manipulate the address decoding windows
|
|
*/
|
|
|
|
static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus,
|
|
int win, int *enabled, u64 *base,
|
|
u32 *size, u8 *target, u8 *attr,
|
|
u64 *remap)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 basereg = readl(addr + WIN_BASE_OFF);
|
|
u32 ctrlreg = readl(addr + WIN_CTRL_OFF);
|
|
|
|
if (!(ctrlreg & WIN_CTRL_ENABLE)) {
|
|
*enabled = 0;
|
|
return;
|
|
}
|
|
|
|
*enabled = 1;
|
|
*base = ((u64)basereg & WIN_BASE_HIGH) << 32;
|
|
*base |= (basereg & WIN_BASE_LOW);
|
|
*size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1;
|
|
|
|
if (target)
|
|
*target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT;
|
|
|
|
if (attr)
|
|
*attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT;
|
|
|
|
if (remap) {
|
|
if (win < mbus->soc->num_remappable_wins) {
|
|
u32 remap_low = readl(addr + WIN_REMAP_LO_OFF);
|
|
u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF);
|
|
*remap = ((u64)remap_hi << 32) | remap_low;
|
|
} else
|
|
*remap = 0;
|
|
}
|
|
}
|
|
|
|
static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus,
|
|
int win)
|
|
{
|
|
void __iomem *addr;
|
|
|
|
addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win);
|
|
|
|
writel(0, addr + WIN_BASE_OFF);
|
|
writel(0, addr + WIN_CTRL_OFF);
|
|
if (win < mbus->soc->num_remappable_wins) {
|
|
writel(0, addr + WIN_REMAP_LO_OFF);
|
|
writel(0, addr + WIN_REMAP_HI_OFF);
|
|
}
|
|
}
|
|
|
|
/* Checks whether the given window number is available */
|
|
static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
|
|
const int win)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 ctrl = readl(addr + WIN_CTRL_OFF);
|
|
return !(ctrl & WIN_CTRL_ENABLE);
|
|
}
|
|
|
|
/*
|
|
* Checks whether the given (base, base+size) area doesn't overlap an
|
|
* existing region
|
|
*/
|
|
static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size,
|
|
u8 target, u8 attr)
|
|
{
|
|
u64 end = (u64)base + size;
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase, wend;
|
|
u32 wsize;
|
|
u8 wtarget, wattr;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
&wtarget, &wattr, NULL);
|
|
|
|
if (!enabled)
|
|
continue;
|
|
|
|
wend = wbase + wsize;
|
|
|
|
/*
|
|
* Check if the current window overlaps with the
|
|
* proposed physical range
|
|
*/
|
|
if ((u64)base < wend && end > wbase)
|
|
return 0;
|
|
|
|
/*
|
|
* Check if target/attribute conflicts
|
|
*/
|
|
if (target == wtarget && attr == wattr)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size)
|
|
{
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase;
|
|
u32 wsize;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
NULL, NULL, NULL);
|
|
|
|
if (!enabled)
|
|
continue;
|
|
|
|
if (base == wbase && size == wsize)
|
|
return win;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
|
|
int win, phys_addr_t base, size_t size,
|
|
phys_addr_t remap, u8 target,
|
|
u8 attr)
|
|
{
|
|
void __iomem *addr = mbus->mbuswins_base +
|
|
mbus->soc->win_cfg_offset(win);
|
|
u32 ctrl, remap_addr;
|
|
|
|
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
|
|
(attr << WIN_CTRL_ATTR_SHIFT) |
|
|
(target << WIN_CTRL_TGT_SHIFT) |
|
|
WIN_CTRL_ENABLE;
|
|
|
|
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
|
|
writel(ctrl, addr + WIN_CTRL_OFF);
|
|
if (win < mbus->soc->num_remappable_wins) {
|
|
if (remap == MVEBU_MBUS_NO_REMAP)
|
|
remap_addr = base;
|
|
else
|
|
remap_addr = remap;
|
|
writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF);
|
|
writel(0, addr + WIN_REMAP_HI_OFF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t base, size_t size,
|
|
phys_addr_t remap, u8 target,
|
|
u8 attr)
|
|
{
|
|
int win;
|
|
|
|
if (remap == MVEBU_MBUS_NO_REMAP) {
|
|
for (win = mbus->soc->num_remappable_wins;
|
|
win < mbus->soc->num_wins; win++)
|
|
if (mvebu_mbus_window_is_free(mbus, win))
|
|
return mvebu_mbus_setup_window(mbus, win, base,
|
|
size, remap,
|
|
target, attr);
|
|
}
|
|
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++)
|
|
if (mvebu_mbus_window_is_free(mbus, win))
|
|
return mvebu_mbus_setup_window(mbus, win, base, size,
|
|
remap, target, attr);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Debugfs debugging
|
|
*/
|
|
|
|
/* Common function used for Dove, Kirkwood, Armada 370/XP and Orion 5x */
|
|
static int mvebu_sdram_debug_show_orion(struct mvebu_mbus_state *mbus,
|
|
struct seq_file *seq, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
u32 basereg = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
|
u32 sizereg = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
|
u64 base;
|
|
u32 size;
|
|
|
|
if (!(sizereg & DDR_SIZE_ENABLED)) {
|
|
seq_printf(seq, "[%d] disabled\n", i);
|
|
continue;
|
|
}
|
|
|
|
base = ((u64)basereg & DDR_BASE_CS_HIGH_MASK) << 32;
|
|
base |= basereg & DDR_BASE_CS_LOW_MASK;
|
|
size = (sizereg | ~DDR_SIZE_MASK);
|
|
|
|
seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
|
|
i, (unsigned long long)base,
|
|
(unsigned long long)base + size + 1,
|
|
(sizereg & DDR_SIZE_CS_MASK) >> DDR_SIZE_CS_SHIFT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Special function for Dove */
|
|
static int mvebu_sdram_debug_show_dove(struct mvebu_mbus_state *mbus,
|
|
struct seq_file *seq, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
|
|
u64 base;
|
|
u32 size;
|
|
|
|
if (!(map & 1)) {
|
|
seq_printf(seq, "[%d] disabled\n", i);
|
|
continue;
|
|
}
|
|
|
|
base = map & 0xff800000;
|
|
size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
|
|
|
|
seq_printf(seq, "[%d] %016llx - %016llx : cs%d\n",
|
|
i, (unsigned long long)base,
|
|
(unsigned long long)base + size, i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_sdram_debug_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct mvebu_mbus_state *mbus = &mbus_state;
|
|
return mbus->soc->show_cpu_target(mbus, seq, v);
|
|
}
|
|
|
|
static int mvebu_sdram_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, mvebu_sdram_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mvebu_sdram_debug_fops = {
|
|
.open = mvebu_sdram_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct mvebu_mbus_state *mbus = &mbus_state;
|
|
int win;
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++) {
|
|
u64 wbase, wremap;
|
|
u32 wsize;
|
|
u8 wtarget, wattr;
|
|
int enabled;
|
|
|
|
mvebu_mbus_read_window(mbus, win,
|
|
&enabled, &wbase, &wsize,
|
|
&wtarget, &wattr, &wremap);
|
|
|
|
if (!enabled) {
|
|
seq_printf(seq, "[%02d] disabled\n", win);
|
|
continue;
|
|
}
|
|
|
|
seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x",
|
|
win, (unsigned long long)wbase,
|
|
(unsigned long long)(wbase + wsize), wtarget, wattr);
|
|
|
|
if (win < mbus->soc->num_remappable_wins) {
|
|
seq_printf(seq, " (remap %016llx)\n",
|
|
(unsigned long long)wremap);
|
|
} else
|
|
seq_printf(seq, "\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_devs_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, mvebu_devs_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mvebu_devs_debug_fops = {
|
|
.open = mvebu_devs_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*
|
|
* SoC-specific functions and definitions
|
|
*/
|
|
|
|
static unsigned int orion_mbus_win_offset(int win)
|
|
{
|
|
return win << 4;
|
|
}
|
|
|
|
static unsigned int armada_370_xp_mbus_win_offset(int win)
|
|
{
|
|
/* The register layout is a bit annoying and the below code
|
|
* tries to cope with it.
|
|
* - At offset 0x0, there are the registers for the first 8
|
|
* windows, with 4 registers of 32 bits per window (ctrl,
|
|
* base, remap low, remap high)
|
|
* - Then at offset 0x80, there is a hole of 0x10 bytes for
|
|
* the internal registers base address and internal units
|
|
* sync barrier register.
|
|
* - Then at offset 0x90, there the registers for 12
|
|
* windows, with only 2 registers of 32 bits per window
|
|
* (ctrl, base).
|
|
*/
|
|
if (win < 8)
|
|
return win << 4;
|
|
else
|
|
return 0x90 + ((win - 8) << 3);
|
|
}
|
|
|
|
static unsigned int mv78xx0_mbus_win_offset(int win)
|
|
{
|
|
if (win < 8)
|
|
return win << 4;
|
|
else
|
|
return 0x900 + ((win - 8) << 4);
|
|
}
|
|
|
|
static void __init
|
|
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
|
|
{
|
|
int i;
|
|
int cs;
|
|
|
|
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
|
|
|
|
for (i = 0, cs = 0; i < 4; i++) {
|
|
u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
|
|
u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
|
|
|
|
/*
|
|
* We only take care of entries for which the chip
|
|
* select is enabled, and that don't have high base
|
|
* address bits set (devices can only access the first
|
|
* 32 bits of the memory).
|
|
*/
|
|
if ((size & DDR_SIZE_ENABLED) &&
|
|
!(base & DDR_BASE_CS_HIGH_MASK)) {
|
|
struct mbus_dram_window *w;
|
|
|
|
w = &mvebu_mbus_dram_info.cs[cs++];
|
|
w->cs_index = i;
|
|
w->mbus_attr = 0xf & ~(1 << i);
|
|
if (mbus->hw_io_coherency)
|
|
w->mbus_attr |= ATTR_HW_COHERENCY;
|
|
w->base = base & DDR_BASE_CS_LOW_MASK;
|
|
w->size = (size | ~DDR_SIZE_MASK) + 1;
|
|
}
|
|
}
|
|
mvebu_mbus_dram_info.num_cs = cs;
|
|
}
|
|
|
|
static void __init
|
|
mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
|
|
{
|
|
int i;
|
|
int cs;
|
|
|
|
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
|
|
|
|
for (i = 0, cs = 0; i < 2; i++) {
|
|
u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
|
|
|
|
/*
|
|
* Chip select enabled?
|
|
*/
|
|
if (map & 1) {
|
|
struct mbus_dram_window *w;
|
|
|
|
w = &mvebu_mbus_dram_info.cs[cs++];
|
|
w->cs_index = i;
|
|
w->mbus_attr = 0; /* CS address decoding done inside */
|
|
/* the DDR controller, no need to */
|
|
/* provide attributes */
|
|
w->base = map & 0xff800000;
|
|
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
|
|
}
|
|
}
|
|
|
|
mvebu_mbus_dram_info.num_cs = cs;
|
|
}
|
|
|
|
static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
|
|
.num_wins = 20,
|
|
.num_remappable_wins = 8,
|
|
.win_cfg_offset = armada_370_xp_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
|
|
.num_wins = 8,
|
|
.num_remappable_wins = 4,
|
|
.win_cfg_offset = orion_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data dove_mbus_data = {
|
|
.num_wins = 8,
|
|
.num_remappable_wins = 4,
|
|
.win_cfg_offset = orion_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_dove,
|
|
};
|
|
|
|
/*
|
|
* Some variants of Orion5x have 4 remappable windows, some other have
|
|
* only two of them.
|
|
*/
|
|
static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
|
|
.num_wins = 8,
|
|
.num_remappable_wins = 4,
|
|
.win_cfg_offset = orion_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
|
|
.num_wins = 8,
|
|
.num_remappable_wins = 2,
|
|
.win_cfg_offset = orion_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
|
|
.num_wins = 14,
|
|
.num_remappable_wins = 8,
|
|
.win_cfg_offset = mv78xx0_mbus_win_offset,
|
|
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
|
|
.show_cpu_target = mvebu_sdram_debug_show_orion,
|
|
};
|
|
|
|
/*
|
|
* The driver doesn't yet have a DT binding because the details of
|
|
* this DT binding still need to be sorted out. However, as a
|
|
* preparation, we already use of_device_id to match a SoC description
|
|
* string against the SoC specific details of this driver.
|
|
*/
|
|
static const struct of_device_id of_mvebu_mbus_ids[] = {
|
|
{ .compatible = "marvell,armada370-mbus",
|
|
.data = &armada_370_xp_mbus_data, },
|
|
{ .compatible = "marvell,armadaxp-mbus",
|
|
.data = &armada_370_xp_mbus_data, },
|
|
{ .compatible = "marvell,kirkwood-mbus",
|
|
.data = &kirkwood_mbus_data, },
|
|
{ .compatible = "marvell,dove-mbus",
|
|
.data = &dove_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5281-mbus",
|
|
.data = &orion5x_4win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5182-mbus",
|
|
.data = &orion5x_2win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f5181-mbus",
|
|
.data = &orion5x_2win_mbus_data, },
|
|
{ .compatible = "marvell,orion5x-88f6183-mbus",
|
|
.data = &orion5x_4win_mbus_data, },
|
|
{ .compatible = "marvell,mv78xx0-mbus",
|
|
.data = &mv78xx0_mbus_data, },
|
|
{ },
|
|
};
|
|
|
|
/*
|
|
* Public API of the driver
|
|
*/
|
|
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
|
|
unsigned int attribute,
|
|
phys_addr_t base, size_t size,
|
|
phys_addr_t remap)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
|
|
if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
|
|
pr_err("cannot add window '%x:%x', conflicts with another window\n",
|
|
target, attribute);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
|
|
}
|
|
|
|
int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
|
|
phys_addr_t base, size_t size)
|
|
{
|
|
return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
|
|
size, MVEBU_MBUS_NO_REMAP);
|
|
}
|
|
|
|
int mvebu_mbus_del_window(phys_addr_t base, size_t size)
|
|
{
|
|
int win;
|
|
|
|
win = mvebu_mbus_find_window(&mbus_state, base, size);
|
|
if (win < 0)
|
|
return win;
|
|
|
|
mvebu_mbus_disable_window(&mbus_state, win);
|
|
return 0;
|
|
}
|
|
|
|
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
|
|
{
|
|
if (!res)
|
|
return;
|
|
*res = mbus_state.pcie_mem_aperture;
|
|
}
|
|
|
|
void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
|
|
{
|
|
if (!res)
|
|
return;
|
|
*res = mbus_state.pcie_io_aperture;
|
|
}
|
|
|
|
static __init int mvebu_mbus_debugfs_init(void)
|
|
{
|
|
struct mvebu_mbus_state *s = &mbus_state;
|
|
|
|
/*
|
|
* If no base has been initialized, doesn't make sense to
|
|
* register the debugfs entries. We may be on a multiplatform
|
|
* kernel that isn't running a Marvell EBU SoC.
|
|
*/
|
|
if (!s->mbuswins_base)
|
|
return 0;
|
|
|
|
s->debugfs_root = debugfs_create_dir("mvebu-mbus", NULL);
|
|
if (s->debugfs_root) {
|
|
s->debugfs_sdram = debugfs_create_file("sdram", S_IRUGO,
|
|
s->debugfs_root, NULL,
|
|
&mvebu_sdram_debug_fops);
|
|
s->debugfs_devs = debugfs_create_file("devices", S_IRUGO,
|
|
s->debugfs_root, NULL,
|
|
&mvebu_devs_debug_fops);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
fs_initcall(mvebu_mbus_debugfs_init);
|
|
|
|
static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
|
|
phys_addr_t mbuswins_phys_base,
|
|
size_t mbuswins_size,
|
|
phys_addr_t sdramwins_phys_base,
|
|
size_t sdramwins_size)
|
|
{
|
|
struct device_node *np;
|
|
int win;
|
|
|
|
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
|
|
if (!mbus->mbuswins_base)
|
|
return -ENOMEM;
|
|
|
|
mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
|
|
if (!mbus->sdramwins_base) {
|
|
iounmap(mbus_state.mbuswins_base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
|
|
if (np) {
|
|
mbus->hw_io_coherency = 1;
|
|
of_node_put(np);
|
|
}
|
|
|
|
for (win = 0; win < mbus->soc->num_wins; win++)
|
|
mvebu_mbus_disable_window(mbus, win);
|
|
|
|
mbus->soc->setup_cpu_target(mbus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
|
|
size_t mbuswins_size,
|
|
phys_addr_t sdramwins_phys_base,
|
|
size_t sdramwins_size)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
|
|
for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
|
|
if (!strcmp(of_id->compatible, soc))
|
|
break;
|
|
|
|
if (!of_id->compatible) {
|
|
pr_err("could not find a matching SoC family\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mbus_state.soc = of_id->data;
|
|
|
|
return mvebu_mbus_common_init(&mbus_state,
|
|
mbuswins_phys_base,
|
|
mbuswins_size,
|
|
sdramwins_phys_base,
|
|
sdramwins_size);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
/*
|
|
* The window IDs in the ranges DT property have the following format:
|
|
* - bits 28 to 31: MBus custom field
|
|
* - bits 24 to 27: window target ID
|
|
* - bits 16 to 23: window attribute ID
|
|
* - bits 0 to 15: unused
|
|
*/
|
|
#define CUSTOM(id) (((id) & 0xF0000000) >> 24)
|
|
#define TARGET(id) (((id) & 0x0F000000) >> 24)
|
|
#define ATTR(id) (((id) & 0x00FF0000) >> 16)
|
|
|
|
static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
|
|
u32 base, u32 size,
|
|
u8 target, u8 attr)
|
|
{
|
|
if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
|
|
pr_err("cannot add window '%04x:%04x', conflicts with another window\n",
|
|
target, attr);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP,
|
|
target, attr)) {
|
|
pr_err("cannot add window '%04x:%04x', too many windows\n",
|
|
target, attr);
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
mbus_parse_ranges(struct device_node *node,
|
|
int *addr_cells, int *c_addr_cells, int *c_size_cells,
|
|
int *cell_count, const __be32 **ranges_start,
|
|
const __be32 **ranges_end)
|
|
{
|
|
const __be32 *prop;
|
|
int ranges_len, tuple_len;
|
|
|
|
/* Allow a node with no 'ranges' property */
|
|
*ranges_start = of_get_property(node, "ranges", &ranges_len);
|
|
if (*ranges_start == NULL) {
|
|
*addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0;
|
|
*ranges_start = *ranges_end = NULL;
|
|
return 0;
|
|
}
|
|
*ranges_end = *ranges_start + ranges_len / sizeof(__be32);
|
|
|
|
*addr_cells = of_n_addr_cells(node);
|
|
|
|
prop = of_get_property(node, "#address-cells", NULL);
|
|
*c_addr_cells = be32_to_cpup(prop);
|
|
|
|
prop = of_get_property(node, "#size-cells", NULL);
|
|
*c_size_cells = be32_to_cpup(prop);
|
|
|
|
*cell_count = *addr_cells + *c_addr_cells + *c_size_cells;
|
|
tuple_len = (*cell_count) * sizeof(__be32);
|
|
|
|
if (ranges_len % tuple_len) {
|
|
pr_warn("malformed ranges entry '%s'\n", node->name);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus,
|
|
struct device_node *np)
|
|
{
|
|
int addr_cells, c_addr_cells, c_size_cells;
|
|
int i, ret, cell_count;
|
|
const __be32 *r, *ranges_start, *ranges_end;
|
|
|
|
ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells,
|
|
&c_size_cells, &cell_count,
|
|
&ranges_start, &ranges_end);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) {
|
|
u32 windowid, base, size;
|
|
u8 target, attr;
|
|
|
|
/*
|
|
* An entry with a non-zero custom field do not
|
|
* correspond to a static window, so skip it.
|
|
*/
|
|
windowid = of_read_number(r, 1);
|
|
if (CUSTOM(windowid))
|
|
continue;
|
|
|
|
target = TARGET(windowid);
|
|
attr = ATTR(windowid);
|
|
|
|
base = of_read_number(r + c_addr_cells, addr_cells);
|
|
size = of_read_number(r + c_addr_cells + addr_cells,
|
|
c_size_cells);
|
|
ret = mbus_dt_setup_win(mbus, base, size, target, attr);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
|
|
struct resource *mem,
|
|
struct resource *io)
|
|
{
|
|
u32 reg[2];
|
|
int ret;
|
|
|
|
/*
|
|
* These are optional, so we make sure that resource_size(x) will
|
|
* return 0.
|
|
*/
|
|
memset(mem, 0, sizeof(struct resource));
|
|
mem->end = -1;
|
|
memset(io, 0, sizeof(struct resource));
|
|
io->end = -1;
|
|
|
|
ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
|
|
if (!ret) {
|
|
mem->start = reg[0];
|
|
mem->end = mem->start + reg[1];
|
|
mem->flags = IORESOURCE_MEM;
|
|
}
|
|
|
|
ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
|
|
if (!ret) {
|
|
io->start = reg[0];
|
|
io->end = io->start + reg[1];
|
|
io->flags = IORESOURCE_IO;
|
|
}
|
|
}
|
|
|
|
int __init mvebu_mbus_dt_init(void)
|
|
{
|
|
struct resource mbuswins_res, sdramwins_res;
|
|
struct device_node *np, *controller;
|
|
const struct of_device_id *of_id;
|
|
const __be32 *prop;
|
|
int ret;
|
|
|
|
np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
|
|
if (!np) {
|
|
pr_err("could not find a matching SoC family\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
of_id = of_match_node(of_mvebu_mbus_ids, np);
|
|
mbus_state.soc = of_id->data;
|
|
|
|
prop = of_get_property(np, "controller", NULL);
|
|
if (!prop) {
|
|
pr_err("required 'controller' property missing\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
controller = of_find_node_by_phandle(be32_to_cpup(prop));
|
|
if (!controller) {
|
|
pr_err("could not find an 'mbus-controller' node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_address_to_resource(controller, 0, &mbuswins_res)) {
|
|
pr_err("cannot get MBUS register address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_address_to_resource(controller, 1, &sdramwins_res)) {
|
|
pr_err("cannot get SDRAM register address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get optional pcie-{mem,io}-aperture properties */
|
|
mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
|
|
&mbus_state.pcie_io_aperture);
|
|
|
|
ret = mvebu_mbus_common_init(&mbus_state,
|
|
mbuswins_res.start,
|
|
resource_size(&mbuswins_res),
|
|
sdramwins_res.start,
|
|
resource_size(&sdramwins_res));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Setup statically declared windows in the DT */
|
|
return mbus_dt_setup(&mbus_state, np);
|
|
}
|
|
#endif
|