linux/drivers/pcmcia/sa11xx_base.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

274 lines
7.5 KiB
C

/*======================================================================
Device driver for the PCMCIA control functionality of StrongARM
SA-1100 microprocessors.
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is John G. Dorsey
<john+@cs.cmu.edu>. Portions created by John G. Dorsey are
Copyright (C) 1999 John G. Dorsey. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU Public License version 2 (the "GPL"), in which
case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
======================================================================*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include "soc_common.h"
#include "sa11xx_base.h"
/*
* sa1100_pcmcia_default_mecr_timing
* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* Calculate MECR clock wait states for given CPU clock
* speed and command wait state. This function can be over-
* written by a board specific version.
*
* The default is to simply calculate the BS values as specified in
* the INTEL SA1100 development manual
* "Expansion Memory (PCMCIA) Configuration Register (MECR)"
* that's section 10.2.5 in _my_ version of the manual ;)
*/
static unsigned int
sa1100_pcmcia_default_mecr_timing(struct soc_pcmcia_socket *skt,
unsigned int cpu_speed,
unsigned int cmd_time)
{
return sa1100_pcmcia_mecr_bs(cmd_time, cpu_speed);
}
/* sa1100_pcmcia_set_mecr()
* ^^^^^^^^^^^^^^^^^^^^^^^^
*
* set MECR value for socket <sock> based on this sockets
* io, mem and attribute space access speed.
* Call board specific BS value calculation to allow boards
* to tweak the BS values.
*/
static int
sa1100_pcmcia_set_mecr(struct soc_pcmcia_socket *skt, unsigned int cpu_clock)
{
struct soc_pcmcia_timing timing;
u32 mecr, old_mecr;
unsigned long flags;
unsigned int bs_io, bs_mem, bs_attr;
soc_common_pcmcia_get_timing(skt, &timing);
bs_io = skt->ops->get_timing(skt, cpu_clock, timing.io);
bs_mem = skt->ops->get_timing(skt, cpu_clock, timing.mem);
bs_attr = skt->ops->get_timing(skt, cpu_clock, timing.attr);
local_irq_save(flags);
old_mecr = mecr = MECR;
MECR_FAST_SET(mecr, skt->nr, 0);
MECR_BSIO_SET(mecr, skt->nr, bs_io);
MECR_BSA_SET(mecr, skt->nr, bs_attr);
MECR_BSM_SET(mecr, skt->nr, bs_mem);
if (old_mecr != mecr)
MECR = mecr;
local_irq_restore(flags);
debug(skt, 2, "FAST %X BSM %X BSA %X BSIO %X\n",
MECR_FAST_GET(mecr, skt->nr),
MECR_BSM_GET(mecr, skt->nr), MECR_BSA_GET(mecr, skt->nr),
MECR_BSIO_GET(mecr, skt->nr));
return 0;
}
#ifdef CONFIG_CPU_FREQ
static int
sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
unsigned long val,
struct cpufreq_freqs *freqs)
{
switch (val) {
case CPUFREQ_PRECHANGE:
if (freqs->new > freqs->old)
sa1100_pcmcia_set_mecr(skt, freqs->new);
break;
case CPUFREQ_POSTCHANGE:
if (freqs->new < freqs->old)
sa1100_pcmcia_set_mecr(skt, freqs->new);
break;
case CPUFREQ_RESUMECHANGE:
sa1100_pcmcia_set_mecr(skt, freqs->new);
break;
}
return 0;
}
#endif
static int
sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
{
return sa1100_pcmcia_set_mecr(skt, cpufreq_get(0));
}
static int
sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
{
struct soc_pcmcia_timing timing;
unsigned int clock = cpufreq_get(0);
unsigned long mecr = MECR;
char *p = buf;
soc_common_pcmcia_get_timing(skt, &timing);
p+=sprintf(p, "I/O : %u (%u)\n", timing.io,
sa1100_pcmcia_cmd_time(clock, MECR_BSIO_GET(mecr, skt->nr)));
p+=sprintf(p, "attribute: %u (%u)\n", timing.attr,
sa1100_pcmcia_cmd_time(clock, MECR_BSA_GET(mecr, skt->nr)));
p+=sprintf(p, "common : %u (%u)\n", timing.mem,
sa1100_pcmcia_cmd_time(clock, MECR_BSM_GET(mecr, skt->nr)));
return p - buf;
}
static const char *skt_names[] = {
"PCMCIA socket 0",
"PCMCIA socket 1",
};
#define SKT_DEV_INFO_SIZE(n) \
(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
{
skt->res_skt.start = _PCMCIA(skt->nr);
skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
skt->res_skt.name = skt_names[skt->nr];
skt->res_skt.flags = IORESOURCE_MEM;
skt->res_io.start = _PCMCIAIO(skt->nr);
skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
skt->res_io.name = "io";
skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
skt->res_mem.start = _PCMCIAMem(skt->nr);
skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
skt->res_mem.name = "memory";
skt->res_mem.flags = IORESOURCE_MEM;
skt->res_attr.start = _PCMCIAAttr(skt->nr);
skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
skt->res_attr.name = "attribute";
skt->res_attr.flags = IORESOURCE_MEM;
return soc_pcmcia_add_one(skt);
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_add_one);
void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
{
/*
* set default MECR calculation if the board specific
* code did not specify one...
*/
if (!ops->get_timing)
ops->get_timing = sa1100_pcmcia_default_mecr_timing;
/* Provide our SA11x0 specific timing routines. */
ops->set_timing = sa1100_pcmcia_set_timing;
ops->show_timing = sa1100_pcmcia_show_timing;
#ifdef CONFIG_CPU_FREQ
ops->frequency_change = sa1100_pcmcia_frequency_change;
#endif
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_ops);
int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
int first, int nr)
{
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
int i, ret = 0;
sa11xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
if (!sinfo)
return -ENOMEM;
sinfo->nskt = nr;
/* Initiliaze processor specific parameters */
for (i = 0; i < nr; i++) {
skt = &sinfo->skt[i];
skt->nr = first + i;
skt->ops = ops;
skt->socket.owner = ops->owner;
skt->socket.dev.parent = dev;
skt->socket.pci_irq = NO_IRQ;
ret = sa11xx_drv_pcmcia_add_one(skt);
if (ret)
break;
}
if (ret) {
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
kfree(sinfo);
} else {
dev_set_drvdata(dev, sinfo);
}
return ret;
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
static int __init sa11xx_pcmcia_init(void)
{
return 0;
}
fs_initcall(sa11xx_pcmcia_init);
static void __exit sa11xx_pcmcia_exit(void) {}
module_exit(sa11xx_pcmcia_exit);
MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11xx core socket driver");
MODULE_LICENSE("Dual MPL/GPL");