leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
724b62b5f7
linux/arch/m68knommu/platform/528x/config.c
Steven King 91d6041721 m68knommu: Coldfire QSPI platform support 
Since Grant has added the coldfire-qspi driver to next-spi, here is the
platform support for the parts that have qspi hardware.  This sets up
gpio to do the spi chip select using the default chip select pins; it should
be trivial for boards that require different or additional spi chip selects to
use other gpios as needed.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-17 11:04:19 +10:00

321 lines
7.4 KiB
C
Raw Blame History

/***************************************************************************/
/*
* linux/arch/m68knommu/platform/528x/config.c
*
* Sub-architcture dependant initialization code for the Freescale
* 5280, 5281 and 5282 CPUs.
*
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/
static struct mcf_platform_uart m528x_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m528x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m528x_uart_platform,
};
static struct resource m528x_fec_resources[] = {
{
.start = MCF_MBAR + 0x1000,
.end = MCF_MBAR + 0x1000 + 0x7ff,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m528x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_fec_resources),
.resource = m528x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m528x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 147
#define MCFQSPI_CS1 148
#define MCFQSPI_CS2 149
#define MCFQSPI_CS3 150
static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m528x_cs_control = {
.setup = m528x_cs_setup,
.teardown = m528x_cs_teardown,
.select = m528x_cs_select,
.deselect = m528x_cs_deselect,
};
static struct mcfqspi_platform_data m528x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m528x_cs_control,
};
static struct platform_device m528x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_qspi_resources),
.resource = m528x_qspi_resources,
.dev.platform_data = &m528x_qspi_data,
};
static void __init m528x_qspi_init(void)
{
/* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR);
}
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m528x_devices[] __initdata = {
&m528x_uart,
&m528x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m528x_qspi,
#endif
};
/***************************************************************************/
static void __init m528x_uart_init_line(int line, int irq)
{
u8 port;
if ((line < 0) || (line > 2))
return;
/* make sure PUAPAR is set for UART0 and UART1 */
if (line < 2) {
port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
port |= (0x03 << (line * 2));
writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
}
}
static void __init m528x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m528x_fec_init(void)
{
u16 v16;
/* Set multi-function pins to ethernet mode for fec0 */
v16 = readw(MCF_IPSBAR + 0x100056);
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
writeb(0xc0, MCF_IPSBAR + 0x100058);
}
/***************************************************************************/
static void m528x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE
void wildfire_halt(void)
{
writeb(0, 0x30000007);
writeb(0x2, 0x30000007);
}
#endif
#ifdef CONFIG_WILDFIREMOD
void wildfiremod_halt(void)
{
printk(KERN_INFO "WildFireMod hibernating...\n");
/* Set portE.5 to Digital IO */
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
/* Make portE.5 an output */
MCF5282_GPIO_DDRE |= (1 << 5);
/* Now toggle portE.5 from low to high */
MCF5282_GPIO_PORTE &= ~(1 << 5);
MCF5282_GPIO_PORTE |= (1 << 5);
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
}
#endif
void __init config_BSP(char *commandp, int size)
{
#ifdef CONFIG_WILDFIRE
mach_halt = wildfire_halt;
#endif
#ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt;
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
mach_reset = m528x_cpu_reset;
m528x_uarts_init();
m528x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
m528x_qspi_init();
#endif
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
Reference in New Issue View Git Blame Copy Permalink