forked from Minki/linux
6cec9b07fe
This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
36 lines
1.4 KiB
Plaintext
36 lines
1.4 KiB
Plaintext
|
|
What: /sys/class/net/<iface>/grcan/enable0
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Hardware configuration of physical interface 0. This file reads
|
|
and writes the "Enable 0" bit of the configuration register.
|
|
Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
|
|
core library documentation for details. The default value is 0
|
|
or set by the module parameter grcan.enable0 and can be read at
|
|
/sys/module/grcan/parameters/enable0.
|
|
|
|
What: /sys/class/net/<iface>/grcan/enable1
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Hardware configuration of physical interface 1. This file reads
|
|
and writes the "Enable 1" bit of the configuration register.
|
|
Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
|
|
core library documentation for details. The default value is 0
|
|
or set by the module parameter grcan.enable1 and can be read at
|
|
/sys/module/grcan/parameters/enable1.
|
|
|
|
What: /sys/class/net/<iface>/grcan/select
|
|
Date: October 2012
|
|
KernelVersion: 3.8
|
|
Contact: Andreas Larsson <andreas@gaisler.com>
|
|
Description:
|
|
Configuration of which physical interface to be used. Possible
|
|
values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
|
|
library documentation for details. The default value is 0 or is
|
|
set by the module parameter grcan.select and can be read at
|
|
/sys/module/grcan/parameters/select.
|