linux/drivers/gpu/drm/i915
Imre Deak 6efdf354dd drm/i915: enable only the needed power domains during modeset
So far the modeset code enabled all power domains if it needed any. It
wasn't a problem since HW generations so far only had one always-on
power well and one dynamic power well that can be enabled/disabled. For
domains powered by always-on power wells (panel fitter on pipe A and the
eDP transcoder) we didn't do anything, for all other domains we just
enabled the single dynamic power well.

Future HW generations will change this, as they add multiple dynamic
power wells. Support for these will be added later, this patch prepares
for those by making sure we only enable the required domains.

Note that after this change on HSW we'll enable all power domains even
if it was the domain for the panel fitter on pipe A or the eDP
transcoder. This isn't a problem since the power domain framework
already checks if the domain is on an always-on power well and doesn't
do anything in this case.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-21 20:59:55 +02:00
..
dvo_ch7xxx.c drm/i915: dvo_ch7xxx: fix vsync polarity setting 2013-07-25 16:10:22 +02:00
dvo_ch7017.c
dvo_ivch.c
dvo_ns2501.c
dvo_sil164.c
dvo_tfp410.c
dvo.h drm/i915: Remove unused mode_fixup() vfunc of struct intel_dvo_dev_ops 2013-09-05 21:39:59 +02:00
i915_debugfs.c drm/i915: Wire up CRC for vlv 2013-10-21 18:34:18 +02:00
i915_dma.c drm/i915: Disable all GEM timers and work on unload 2013-10-16 19:42:14 +02:00
i915_drv.c drm/i915: Disable all GEM timers and work on unload 2013-10-16 19:42:14 +02:00
i915_drv.h drm/i915: change power_well->lock to be mutex 2013-10-21 20:57:01 +02:00
i915_gem_context.c drm/i915: cleanup context fini 2013-10-16 11:08:30 +02:00
i915_gem_debug.c drm/i915: Fix #endif comment 2013-08-09 10:45:52 +02:00
i915_gem_dmabuf.c drm/i915: Pin pages whilst mapping the dma-buf 2013-09-03 19:17:58 +02:00
i915_gem_evict.c drm/i915: trace vm eviction instead of everything 2013-10-01 07:45:20 +02:00
i915_gem_execbuffer.c drm/i915: Convert active API to VMA 2013-10-01 07:45:21 +02:00
i915_gem_gtt.c drm/i915: Use kcalloc more 2013-10-01 07:45:01 +02:00
i915_gem_stolen.c Linux 3.12-rc2 2013-09-24 09:32:53 +02:00
i915_gem_tiling.c drm/i915: prevent tiling changes on framebuffer backing storage 2013-10-16 22:04:52 +02:00
i915_gem.c drm/i915: fix open-coded DIV_ROUND_UP 2013-10-21 10:04:03 +02:00
i915_gpu_error.c drm/i915: Educate users in dmesg about reporting gpu hangs 2013-10-10 14:49:17 +02:00
i915_ioc32.c
i915_irq.c drm/i915: bikeshed the pipe CRC irq functions a bit 2013-10-21 18:34:32 +02:00
i915_reg.h drm/i915: Wire up gen2 CRC support 2013-10-21 18:34:08 +02:00
i915_suspend.c drm/i915: don't save/restore CACHE_MODE_0 on gen7+ 2013-10-11 23:32:32 +02:00
i915_sysfs.c drm/i915: Finish enabling rps before use by sysfs or debugfs 2013-10-10 14:23:39 +02:00
i915_trace_points.c
i915_trace.h drm/i915: Add a tracepoint for using a semaphore 2013-10-01 07:45:24 +02:00
i915_ums.c drm/i915: scrap register address storage 2013-06-10 19:54:14 +02:00
intel_acpi.c i915: fix ACPI _DSM warning 2013-08-05 19:04:05 +02:00
intel_bios.c drm/i915: Rip out SUPPORTS_EDP 2013-10-01 07:45:07 +02:00
intel_bios.h drm/i915: use the HDMI DDI buffer translations from VBT 2013-10-01 07:45:04 +02:00
intel_crt.c drm/i915: vlv: fix VGA hotplug after modeset 2013-10-16 22:03:14 +02:00
intel_ddi.c drm/i915: don't leak dp_connector at intel_ddi_init 2013-10-10 12:47:13 +02:00
intel_display.c drm/i915: enable only the needed power domains during modeset 2013-10-21 20:59:55 +02:00
intel_dp.c drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp 2013-10-18 16:00:06 +02:00
intel_drv.h drm/i915: enable only the needed power domains during modeset 2013-10-21 20:59:55 +02:00
intel_dsi_cmd.c drm/i915/dsi: s/size_t/int/ 2013-09-04 17:34:51 +02:00
intel_dsi_cmd.h drm/i915/dsi: s/size_t/int/ 2013-09-04 17:34:51 +02:00
intel_dsi_pll.c drm/i915: Use adjusted_mode in DSI PLL calculations 2013-09-16 23:36:38 +02:00
intel_dsi.c drm/i915: Use pipe_name() instead of the pipe number 2013-10-16 19:42:52 +02:00
intel_dsi.h drm/i915: add VLV DSI PLL Calculations 2013-09-04 17:34:48 +02:00
intel_dvo.c drm/i915: destroy connector sysfs files earlier 2013-10-01 07:45:48 +02:00
intel_fbdev.c drm/i915: fix open-coded DIV_ROUND_UP 2013-10-21 10:04:03 +02:00
intel_hdmi.c drm/i915: Move some hdmi enable function name to vlv specific. 2013-10-16 13:32:18 +02:00
intel_i2c.c drm/i915: Program GMBUS Frequency based on the CDCLK for VLV. 2013-10-01 07:45:41 +02:00
intel_lvds.c drm/i915: destroy connector sysfs files earlier 2013-10-01 07:45:48 +02:00
intel_modes.c drm/i915: Add "Automatic" mode for the "Broadcast RGB" property 2013-01-20 13:09:44 +01:00
intel_opregion.c drm/i915: Add breadcrumbs for why the backlight is being set 2013-10-14 10:02:36 +02:00
intel_overlay.c drm/i915: use pointer = k[cmz...]alloc(sizeof(*pointer), ...) pattern 2013-10-01 07:45:01 +02:00
intel_panel.c drm/i915: Use pipe_name() instead of the pipe number 2013-10-16 19:42:52 +02:00
intel_pm.c drm/i915: change power_well->lock to be mutex 2013-10-21 20:57:01 +02:00
intel_ringbuffer.c drm/i915: Do a fuller init after reset 2013-10-16 11:08:08 +02:00
intel_ringbuffer.h drm/i915: Write RING_TAIL once per-request 2013-09-10 15:35:58 +02:00
intel_sdvo_regs.h
intel_sdvo.c drm/i915: destroy connector sysfs files earlier 2013-10-01 07:45:48 +02:00
intel_sideband.c drm/i915/vlv: add doc names to sideband file 2013-10-11 23:33:44 +02:00
intel_sprite.c drm/i915: Rename primary_disabled to primary_enabled 2013-10-10 12:47:14 +02:00
intel_tv.c drm/i915: Rename intel_flush_display_plane to intel_flush_primary_plane 2013-10-10 12:47:02 +02:00
intel_uncore.c drm/i915: Remove gen specific checks in MMIO 2013-10-10 12:47:10 +02:00
Kconfig drm/i915: Kconfig option to disable the legacy fbdev support 2013-10-11 23:37:23 +02:00
Makefile drm/i915: rename intel_fb.c to intel_fbdev.c 2013-10-11 23:37:33 +02:00