linux/drivers/net/ethernet/intel
Shannon Nelson 6eae9c6a35 i40e: allow FD SB if MFP mode only has 1 partition
Even though the device might be in MFP mode, if there's only one partition
enabled, then we still have plenty of interrupts for managing the Flow
Directory Sideband activity.  This patch enables FD SB in this case.
This patch also reverses the sense of the conditional in order to remove
the negative logic.

Change-ID: I9edf211a6219fc8d159b4be9964f9fd7f4e00bc0
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-15 02:08:16 -07:00
..
e1000 e1000: remove dead e1000_init_eeprom_params calls 2015-09-22 15:58:28 -07:00
e1000e e1000e: Enable TSO for stacked VLAN 2015-09-22 15:58:28 -07:00
fm10k fm10k: do not use enum as boolean 2015-10-13 23:51:37 -07:00
i40e i40e: allow FD SB if MFP mode only has 1 partition 2015-10-15 02:08:16 -07:00
i40evf i40e/i40evf: Add WB_ON_ITR offload support 2015-10-15 02:03:29 -07:00
igb net: igb: avoid using timespec 2015-10-05 03:16:42 -07:00
igbvf igbvf: Enable TSO for stacked VLAN 2015-09-22 15:58:28 -07:00
ixgb ixgb: call netif_carrier_off early on down 2015-03-20 17:41:52 -07:00
ixgbe ixgbe: Fix CS4227-related semaphore error on reset failure 2015-10-15 01:51:28 -07:00
ixgbevf ixgbevf: Enables TSO for stacked VLAN 2015-09-22 15:58:29 -07:00
e100.c e100: Release skb when DMA mapping is failed in e100_xmit_prepare 2015-08-18 14:06:05 -07:00
Kconfig drivers/net: remove all references to obsolete Ethernet-HOWTO 2015-06-23 06:50:35 -07:00
Makefile fm10k: Add skeletal frame for Intel(R) FM10000 Ethernet Switch Host Interface Driver 2014-09-23 03:59:13 -07:00