forked from Minki/linux
475dc86d08
The Arria 10 is latest SOC+FPGA from the Altera SOCFPGA platform. The Arria10 SOC shares some similarities with the SOCFPGA Cyclone5 and Arria5, but there are enough differences to warrant a new base dtsi. The differences are: * 3 EMAC controllers * 5 I2C controllers * 3 SPI controllers * 1.5 GHZ dual A9s * Support for DDR4 Besides the usual memory map and IRQ changes, the clock framework will be different, so this patch just adds the fixed-clocks. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
375 lines
8.6 KiB
Plaintext
375 lines
8.6 KiB
Plaintext
/*
|
|
* Copyright Altera Corporation (C) 2014. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
ethernet1 = &gmac1;
|
|
ethernet2 = &gmac2;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
timer0 = &timer0;
|
|
timer1 = &timer1;
|
|
timer2 = &timer2;
|
|
timer3 = &timer3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
intc: intc@ffffd000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xffffd000 0x1000>,
|
|
<0xffffc100 0x100>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
device_type = "soc";
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma: pdma@ffda1000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xffda1000 0x1000>;
|
|
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 84 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 85 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 86 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 88 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
};
|
|
|
|
clkmgr@ffd04000 {
|
|
compatible = "altr,clk-mgr";
|
|
reg = <0xffd04000 0x1000>;
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
osc1: osc1 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
};
|
|
|
|
main_pll: main_pll {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#clock-cells = <0>;
|
|
compatible = "altr,socfpga-pll-clock";
|
|
clocks = <&osc1>;
|
|
};
|
|
|
|
periph_pll: periph_pll {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#clock-cells = <0>;
|
|
compatible = "altr,socfpga-pll-clock";
|
|
clocks = <&osc1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gmac0: ethernet@ff800000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
|
|
reg = <0xff800000 0x2000>;
|
|
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
/* Filled in by bootloader */
|
|
mac-address = [00 00 00 00 00 00];
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac1: ethernet@ff802000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
|
|
reg = <0xff802000 0x2000>;
|
|
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
/* Filled in by bootloader */
|
|
mac-address = [00 00 00 00 00 00];
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2: ethernet@ff804000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
|
|
reg = <0xff804000 0x2000>;
|
|
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
/* Filled in by bootloader */
|
|
mac-address = [00 00 00 00 00 00];
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@ffc02900 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc02900 0x100>;
|
|
status = "disabled";
|
|
|
|
porta: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <29>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@ffc02a00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc02a00 0x100>;
|
|
status = "disabled";
|
|
|
|
portb: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <29>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
gpio2: gpio@ffc02b00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc02b00 0x100>;
|
|
status = "disabled";
|
|
|
|
portc: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <27>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@ffc02200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02200 0x100>;
|
|
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@ffc02300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02300 0x100>;
|
|
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@ffc02400 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02400 0x100>;
|
|
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@ffc02500 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02500 0x100>;
|
|
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@ffc02600 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02600 0x100>;
|
|
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
L2: l2-cache@fffff000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xfffff000 0x1000>;
|
|
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
mmc: dwmmc0@ff808000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "altr,socfpga-dw-mshc";
|
|
reg = <0xff808000 0x1000>;
|
|
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
fifo-depth = <0x400>;
|
|
};
|
|
|
|
ocram: sram@ffe00000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xffe00000 0x40000>;
|
|
};
|
|
|
|
rst: rstmgr@ffd05000 {
|
|
#reset-cells = <1>;
|
|
compatible = "altr,rst-mgr";
|
|
reg = <0xffd05000 0x100>;
|
|
};
|
|
|
|
sysmgr: sysmgr@ffd06000 {
|
|
compatible = "altr,sys-mgr", "syscon";
|
|
reg = <0xffd06000 0x300>;
|
|
};
|
|
|
|
/* Local timer */
|
|
timer@ffffc600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xffffc600 0x100>;
|
|
interrupts = <1 13 0xf04>;
|
|
};
|
|
|
|
timer0: timer0@ffc02700 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xffc02700 0x100>;
|
|
};
|
|
|
|
timer1: timer1@ffc02800 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xffc02800 0x100>;
|
|
};
|
|
|
|
timer2: timer2@ffd00000 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xffd00000 0x100>;
|
|
};
|
|
|
|
timer3: timer3@ffd00100 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xffd01000 0x100>;
|
|
};
|
|
|
|
uart0: serial0@ffc02000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02000 0x100>;
|
|
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
uart1: serial1@ffc02100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02100 0x100>;
|
|
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
usbphy0: usbphy@0 {
|
|
#phy-cells = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
status = "okay";
|
|
};
|
|
|
|
usb0: usb@ffb00000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb00000 0xffff>;
|
|
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@ffb40000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb40000 0xffff>;
|
|
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@ffd00200 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00200 0x100>;
|
|
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog1: watchdog@ffd00300 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00300 0x100>;
|
|
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|