forked from Minki/linux
6d0376f844
Without this patch, USB host hub shows error when cable was detached Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
1517 lines
36 KiB
C
1517 lines
36 KiB
C
/*
|
|
* Renesas USB driver
|
|
*
|
|
* Copyright (C) 2011 Renesas Solutions Corp.
|
|
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include "common.h"
|
|
|
|
/*
|
|
*** HARDWARE LIMITATION ***
|
|
*
|
|
* 1) renesas_usbhs has a limited number of controllable devices.
|
|
* it can control only 9 devices in generally.
|
|
* see DEVADDn / DCPMAXP / PIPEMAXP.
|
|
*
|
|
* 2) renesas_usbhs pipe number is limited.
|
|
* the pipe will be re-used for each devices.
|
|
* so, software should control DATA0/1 sequence of each devices.
|
|
*/
|
|
|
|
|
|
/*
|
|
* image of mod_host
|
|
*
|
|
* +--------+
|
|
* | udev 0 | --> it is used when set address
|
|
* +--------+
|
|
*
|
|
* +--------+ pipes are reused for each uep.
|
|
* | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when
|
|
* +--------+ | | other device requested
|
|
* +- [uep 1 (bulk)] --|---+ +--------------+
|
|
* | +--------------> | pipe0 (dcp) |
|
|
* +- [uep 2 (bulk)] -@ | +--------------+
|
|
* | | pipe1 (isoc) |
|
|
* +--------+ | +--------------+
|
|
* | udev 2 |-+- [uep 0 (dcp) ] -@ +----------> | pipe2 (bulk) |
|
|
* +--------+ | +--------------+
|
|
* +- [uep 1 (int) ] ----+ +------> | pipe3 (bulk) |
|
|
* | | +--------------+
|
|
* +--------+ +-----|------> | pipe4 (int) |
|
|
* | udev 3 |-+- [uep 0 (dcp) ] -@ | +--------------+
|
|
* +--------+ | | | .... |
|
|
* +- [uep 1 (bulk)] -@ | | .... |
|
|
* | |
|
|
* +- [uep 2 (bulk)]-----------+
|
|
*
|
|
* @ : uep requested free pipe, but all have been used.
|
|
* now it is waiting for free pipe
|
|
*/
|
|
|
|
|
|
/*
|
|
* struct
|
|
*/
|
|
struct usbhsh_request {
|
|
struct urb *urb;
|
|
struct usbhs_pkt pkt;
|
|
};
|
|
|
|
struct usbhsh_device {
|
|
struct usb_device *usbv;
|
|
struct list_head ep_list_head; /* list of usbhsh_ep */
|
|
};
|
|
|
|
struct usbhsh_ep {
|
|
struct usbhs_pipe *pipe; /* attached pipe */
|
|
struct usbhsh_device *udev; /* attached udev */
|
|
struct usb_host_endpoint *ep;
|
|
struct list_head ep_list; /* list to usbhsh_device */
|
|
};
|
|
|
|
#define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
|
|
#define USBHSH_PORT_MAX 7 /* see DEVADDn :: HUBPORT */
|
|
struct usbhsh_hpriv {
|
|
struct usbhs_mod mod;
|
|
struct usbhs_pipe *dcp;
|
|
|
|
struct usbhsh_device udev[USBHSH_DEVICE_MAX];
|
|
|
|
u32 port_stat; /* USB_PORT_STAT_xxx */
|
|
|
|
struct completion setup_ack_done;
|
|
};
|
|
|
|
|
|
static const char usbhsh_hcd_name[] = "renesas_usbhs host";
|
|
|
|
/*
|
|
* macro
|
|
*/
|
|
#define usbhsh_priv_to_hpriv(priv) \
|
|
container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
|
|
|
|
#define __usbhsh_for_each_udev(start, pos, h, i) \
|
|
for (i = start, pos = (h)->udev + i; \
|
|
i < USBHSH_DEVICE_MAX; \
|
|
i++, pos = (h)->udev + i)
|
|
|
|
#define usbhsh_for_each_udev(pos, hpriv, i) \
|
|
__usbhsh_for_each_udev(1, pos, hpriv, i)
|
|
|
|
#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \
|
|
__usbhsh_for_each_udev(0, pos, hpriv, i)
|
|
|
|
#define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv)
|
|
#define usbhsh_hcd_to_dev(h) ((h)->self.controller)
|
|
|
|
#define usbhsh_hpriv_to_priv(h) ((h)->mod.priv)
|
|
#define usbhsh_hpriv_to_dcp(h) ((h)->dcp)
|
|
#define usbhsh_hpriv_to_hcd(h) \
|
|
container_of((void *)h, struct usb_hcd, hcd_priv)
|
|
|
|
#define usbhsh_ep_to_uep(u) ((u)->hcpriv)
|
|
#define usbhsh_uep_to_pipe(u) ((u)->pipe)
|
|
#define usbhsh_uep_to_udev(u) ((u)->udev)
|
|
#define usbhsh_uep_to_ep(u) ((u)->ep)
|
|
|
|
#define usbhsh_urb_to_ureq(u) ((u)->hcpriv)
|
|
#define usbhsh_urb_to_usbv(u) ((u)->dev)
|
|
|
|
#define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev)
|
|
|
|
#define usbhsh_udev_to_usbv(h) ((h)->usbv)
|
|
#define usbhsh_udev_is_used(h) usbhsh_udev_to_usbv(h)
|
|
|
|
#define usbhsh_pipe_to_uep(p) ((p)->mod_private)
|
|
|
|
#define usbhsh_device_parent(d) (usbhsh_usbv_to_udev((d)->usbv->parent))
|
|
#define usbhsh_device_hubport(d) ((d)->usbv->portnum)
|
|
#define usbhsh_device_number(h, d) ((int)((d) - (h)->udev))
|
|
#define usbhsh_device_nth(h, d) ((h)->udev + d)
|
|
#define usbhsh_device0(h) usbhsh_device_nth(h, 0)
|
|
|
|
#define usbhsh_port_stat_init(h) ((h)->port_stat = 0)
|
|
#define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s))
|
|
#define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s))
|
|
#define usbhsh_port_stat_get(h) ((h)->port_stat)
|
|
|
|
#define usbhsh_pkt_to_ureq(p) \
|
|
container_of((void *)p, struct usbhsh_request, pkt)
|
|
|
|
/*
|
|
* req alloc/free
|
|
*/
|
|
static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct usbhsh_request *ureq;
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
|
|
if (!ureq) {
|
|
dev_err(dev, "ureq alloc fail\n");
|
|
return NULL;
|
|
}
|
|
|
|
usbhs_pkt_init(&ureq->pkt);
|
|
ureq->urb = urb;
|
|
usbhsh_urb_to_ureq(urb) = ureq;
|
|
|
|
return ureq;
|
|
}
|
|
|
|
static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv,
|
|
struct usbhsh_request *ureq)
|
|
{
|
|
usbhsh_urb_to_ureq(ureq->urb) = NULL;
|
|
ureq->urb = NULL;
|
|
|
|
kfree(ureq);
|
|
}
|
|
|
|
/*
|
|
* status
|
|
*/
|
|
static int usbhsh_is_running(struct usbhsh_hpriv *hpriv)
|
|
{
|
|
/*
|
|
* we can decide some device is attached or not
|
|
* by checking mod.irq_attch
|
|
* see
|
|
* usbhsh_irq_attch()
|
|
* usbhsh_irq_dtch()
|
|
*/
|
|
return (hpriv->mod.irq_attch == NULL);
|
|
}
|
|
|
|
/*
|
|
* pipe control
|
|
*/
|
|
static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
struct usbhs_pkt *pkt)
|
|
{
|
|
int len = urb->actual_length;
|
|
int maxp = usb_endpoint_maxp(&urb->ep->desc);
|
|
int t = 0;
|
|
|
|
/* DCP is out of sequence control */
|
|
if (usb_pipecontrol(urb->pipe))
|
|
return;
|
|
|
|
/*
|
|
* renesas_usbhs pipe has a limitation in a number.
|
|
* So, driver should re-use the limited pipe for each device/endpoint.
|
|
* DATA0/1 sequence should be saved for it.
|
|
* see [image of mod_host]
|
|
* [HARDWARE LIMITATION]
|
|
*/
|
|
|
|
/*
|
|
* next sequence depends on actual_length
|
|
*
|
|
* ex) actual_length = 1147, maxp = 512
|
|
* data0 : 512
|
|
* data1 : 512
|
|
* data0 : 123
|
|
* data1 is the next sequence
|
|
*/
|
|
t = len / maxp;
|
|
if (len % maxp)
|
|
t++;
|
|
if (pkt->zero)
|
|
t++;
|
|
t %= 2;
|
|
|
|
if (t)
|
|
usb_dotoggle(urb->dev,
|
|
usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe));
|
|
}
|
|
|
|
static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb);
|
|
|
|
static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
|
|
struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
|
|
struct usbhs_pipe *pipe;
|
|
struct usb_endpoint_descriptor *desc = &urb->ep->desc;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
unsigned long flags;
|
|
int dir_in_req = !!usb_pipein(urb->pipe);
|
|
int is_dcp = usb_endpoint_xfer_control(desc);
|
|
int i, dir_in;
|
|
int ret = -EBUSY;
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
if (unlikely(usbhsh_uep_to_pipe(uep))) {
|
|
dev_err(dev, "uep already has pipe\n");
|
|
goto usbhsh_pipe_attach_done;
|
|
}
|
|
|
|
usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
|
|
|
|
/* check pipe type */
|
|
if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc)))
|
|
continue;
|
|
|
|
/* check pipe direction if normal pipe */
|
|
if (!is_dcp) {
|
|
dir_in = !!usbhs_pipe_is_dir_in(pipe);
|
|
if (0 != (dir_in - dir_in_req))
|
|
continue;
|
|
}
|
|
|
|
/* check pipe is free */
|
|
if (usbhsh_pipe_to_uep(pipe))
|
|
continue;
|
|
|
|
/*
|
|
* attach pipe to uep
|
|
*
|
|
* usbhs_pipe_config_update() should be called after
|
|
* usbhs_set_device_config()
|
|
* see
|
|
* DCPMAXP/PIPEMAXP
|
|
*/
|
|
usbhsh_uep_to_pipe(uep) = pipe;
|
|
usbhsh_pipe_to_uep(pipe) = uep;
|
|
|
|
usbhs_pipe_config_update(pipe,
|
|
usbhsh_device_number(hpriv, udev),
|
|
usb_endpoint_num(desc),
|
|
usb_endpoint_maxp(desc));
|
|
|
|
dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__,
|
|
usbhsh_device_number(hpriv, udev),
|
|
usb_endpoint_num(desc),
|
|
usbhs_pipe_name(pipe),
|
|
dir_in_req ? "in" : "out");
|
|
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
usbhsh_pipe_attach_done:
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
|
|
struct usbhsh_ep *uep)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usbhs_pipe *pipe;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
unsigned long flags;
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
pipe = usbhsh_uep_to_pipe(uep);
|
|
|
|
if (unlikely(!pipe)) {
|
|
dev_err(dev, "uep doens't have pipe\n");
|
|
} else {
|
|
struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
|
|
struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);
|
|
|
|
/* detach pipe from uep */
|
|
usbhsh_uep_to_pipe(uep) = NULL;
|
|
usbhsh_pipe_to_uep(pipe) = NULL;
|
|
|
|
dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__,
|
|
usbhsh_device_number(hpriv, udev),
|
|
usb_endpoint_num(&ep->desc),
|
|
usbhs_pipe_name(pipe));
|
|
}
|
|
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
}
|
|
|
|
/*
|
|
* endpoint control
|
|
*/
|
|
static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
|
|
struct usb_host_endpoint *ep = urb->ep;
|
|
struct usbhsh_ep *uep;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
struct usb_endpoint_descriptor *desc = &ep->desc;
|
|
unsigned long flags;
|
|
|
|
uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
|
|
if (!uep) {
|
|
dev_err(dev, "usbhsh_ep alloc fail\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
/*
|
|
* init endpoint
|
|
*/
|
|
INIT_LIST_HEAD(&uep->ep_list);
|
|
list_add_tail(&uep->ep_list, &udev->ep_list_head);
|
|
|
|
usbhsh_uep_to_udev(uep) = udev;
|
|
usbhsh_uep_to_ep(uep) = ep;
|
|
usbhsh_ep_to_uep(ep) = uep;
|
|
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
|
|
dev_dbg(dev, "%s [%d-%d]\n", __func__,
|
|
usbhsh_device_number(hpriv, udev),
|
|
usb_endpoint_num(desc));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
|
|
unsigned long flags;
|
|
|
|
if (!uep)
|
|
return;
|
|
|
|
dev_dbg(dev, "%s [%d-%d]\n", __func__,
|
|
usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
|
|
usb_endpoint_num(&ep->desc));
|
|
|
|
if (usbhsh_uep_to_pipe(uep))
|
|
usbhsh_pipe_detach(hpriv, uep);
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
/* remove this endpoint from udev */
|
|
list_del_init(&uep->ep_list);
|
|
|
|
usbhsh_uep_to_udev(uep) = NULL;
|
|
usbhsh_uep_to_ep(uep) = NULL;
|
|
usbhsh_ep_to_uep(ep) = NULL;
|
|
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
|
|
kfree(uep);
|
|
}
|
|
|
|
static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv,
|
|
struct usbhsh_device *udev)
|
|
{
|
|
struct usbhsh_ep *uep, *next;
|
|
|
|
list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list)
|
|
usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep));
|
|
}
|
|
|
|
/*
|
|
* device control
|
|
*/
|
|
static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd,
|
|
struct usbhsh_device *udev)
|
|
{
|
|
struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
|
|
|
|
return hcd->self.root_hub == usbv->parent;
|
|
}
|
|
|
|
static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
|
|
{
|
|
return !list_empty(&udev->ep_list_head);
|
|
}
|
|
|
|
static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb)
|
|
{
|
|
struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
|
|
struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
|
|
|
|
/* usbhsh_device_attach() is still not called */
|
|
if (!udev)
|
|
return NULL;
|
|
|
|
/* if it is device0, return it */
|
|
if (0 == usb_pipedevice(urb->pipe))
|
|
return usbhsh_device0(hpriv);
|
|
|
|
/* return attached device */
|
|
return udev;
|
|
}
|
|
|
|
static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb)
|
|
{
|
|
struct usbhsh_device *udev = NULL;
|
|
struct usbhsh_device *udev0 = usbhsh_device0(hpriv);
|
|
struct usbhsh_device *pos;
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
struct device *dev = usbhsh_hcd_to_dev(hcd);
|
|
struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
unsigned long flags;
|
|
u16 upphub, hubport;
|
|
int i;
|
|
|
|
/*
|
|
* This function should be called only while urb is pointing to device0.
|
|
* It will attach unused usbhsh_device to urb (usbv),
|
|
* and initialize device0.
|
|
* You can use usbhsh_device_get() to get "current" udev,
|
|
* and usbhsh_usbv_to_udev() is for "attached" udev.
|
|
*/
|
|
if (0 != usb_pipedevice(urb->pipe)) {
|
|
dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
/*
|
|
* find unused device
|
|
*/
|
|
usbhsh_for_each_udev(pos, hpriv, i) {
|
|
if (usbhsh_udev_is_used(pos))
|
|
continue;
|
|
udev = pos;
|
|
break;
|
|
}
|
|
|
|
if (udev) {
|
|
/*
|
|
* usbhsh_usbv_to_udev()
|
|
* usbhsh_udev_to_usbv()
|
|
* will be enable
|
|
*/
|
|
dev_set_drvdata(&usbv->dev, udev);
|
|
udev->usbv = usbv;
|
|
}
|
|
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
|
|
if (!udev) {
|
|
dev_err(dev, "no free usbhsh_device\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (usbhsh_device_has_endpoint(udev)) {
|
|
dev_warn(dev, "udev have old endpoint\n");
|
|
usbhsh_endpoint_detach_all(hpriv, udev);
|
|
}
|
|
|
|
if (usbhsh_device_has_endpoint(udev0)) {
|
|
dev_warn(dev, "udev0 have old endpoint\n");
|
|
usbhsh_endpoint_detach_all(hpriv, udev0);
|
|
}
|
|
|
|
/* uep will be attached */
|
|
INIT_LIST_HEAD(&udev0->ep_list_head);
|
|
INIT_LIST_HEAD(&udev->ep_list_head);
|
|
|
|
/*
|
|
* set device0 config
|
|
*/
|
|
usbhs_set_device_config(priv,
|
|
0, 0, 0, usbv->speed);
|
|
|
|
/*
|
|
* set new device config
|
|
*/
|
|
upphub = 0;
|
|
hubport = 0;
|
|
if (!usbhsh_connected_to_rhdev(hcd, udev)) {
|
|
/* if udev is not connected to rhdev, it means parent is Hub */
|
|
struct usbhsh_device *parent = usbhsh_device_parent(udev);
|
|
|
|
upphub = usbhsh_device_number(hpriv, parent);
|
|
hubport = usbhsh_device_hubport(udev);
|
|
|
|
dev_dbg(dev, "%s connecte to Hub [%d:%d](%p)\n", __func__,
|
|
upphub, hubport, parent);
|
|
}
|
|
|
|
usbhs_set_device_config(priv,
|
|
usbhsh_device_number(hpriv, udev),
|
|
upphub, hubport, usbv->speed);
|
|
|
|
dev_dbg(dev, "%s [%d](%p)\n", __func__,
|
|
usbhsh_device_number(hpriv, udev), udev);
|
|
|
|
return udev;
|
|
}
|
|
|
|
static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv,
|
|
struct usbhsh_device *udev)
|
|
{
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhsh_hcd_to_dev(hcd);
|
|
struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
|
|
unsigned long flags;
|
|
|
|
dev_dbg(dev, "%s [%d](%p)\n", __func__,
|
|
usbhsh_device_number(hpriv, udev), udev);
|
|
|
|
if (usbhsh_device_has_endpoint(udev)) {
|
|
dev_warn(dev, "udev still have endpoint\n");
|
|
usbhsh_endpoint_detach_all(hpriv, udev);
|
|
}
|
|
|
|
/*
|
|
* There is nothing to do if it is device0.
|
|
* see
|
|
* usbhsh_device_attach()
|
|
* usbhsh_device_get()
|
|
*/
|
|
if (0 == usbhsh_device_number(hpriv, udev))
|
|
return;
|
|
|
|
/******************** spin lock ********************/
|
|
usbhs_lock(priv, flags);
|
|
|
|
/*
|
|
* usbhsh_usbv_to_udev()
|
|
* usbhsh_udev_to_usbv()
|
|
* will be disable
|
|
*/
|
|
dev_set_drvdata(&usbv->dev, NULL);
|
|
udev->usbv = NULL;
|
|
|
|
usbhs_unlock(priv, flags);
|
|
/******************** spin unlock ******************/
|
|
}
|
|
|
|
/*
|
|
* queue push/pop
|
|
*/
|
|
static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
|
|
{
|
|
struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
struct urb *urb = ureq->urb;
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int status = 0;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (!urb) {
|
|
dev_warn(dev, "pkt doesn't have urb\n");
|
|
return;
|
|
}
|
|
|
|
if (!usbhsh_is_running(hpriv))
|
|
status = -ESHUTDOWN;
|
|
|
|
urb->actual_length = pkt->actual;
|
|
usbhsh_ureq_free(hpriv, ureq);
|
|
|
|
usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
|
|
usbhsh_pipe_detach(hpriv, uep);
|
|
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
usb_hcd_giveback_urb(hcd, urb, status);
|
|
}
|
|
|
|
static int usbhsh_queue_push(struct usb_hcd *hcd,
|
|
struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
|
|
struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
|
|
struct device *dev = usbhsh_hcd_to_dev(hcd);
|
|
struct usbhsh_request *ureq;
|
|
void *buf;
|
|
int len, sequence;
|
|
|
|
if (usb_pipeisoc(urb->pipe)) {
|
|
dev_err(dev, "pipe iso is not supported now\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* this ureq will be freed on usbhsh_queue_done() */
|
|
ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
|
|
if (unlikely(!ureq)) {
|
|
dev_err(dev, "ureq alloc fail\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (usb_pipein(urb->pipe))
|
|
pipe->handler = &usbhs_fifo_pio_pop_handler;
|
|
else
|
|
pipe->handler = &usbhs_fifo_pio_push_handler;
|
|
|
|
buf = (void *)(urb->transfer_buffer + urb->actual_length);
|
|
len = urb->transfer_buffer_length - urb->actual_length;
|
|
|
|
sequence = usb_gettoggle(urb->dev,
|
|
usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe));
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
|
|
buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
|
|
sequence);
|
|
|
|
usbhs_pkt_start(pipe);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* DCP setup stage
|
|
*/
|
|
static int usbhsh_is_request_address(struct urb *urb)
|
|
{
|
|
struct usb_ctrlrequest *req;
|
|
|
|
req = (struct usb_ctrlrequest *)urb->setup_packet;
|
|
|
|
if ((DeviceOutRequest == req->bRequestType << 8) &&
|
|
(USB_REQ_SET_ADDRESS == req->bRequest))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
struct usbhs_pipe *pipe)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usb_ctrlrequest req;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
/*
|
|
* wait setup packet ACK
|
|
* see
|
|
* usbhsh_irq_setup_ack()
|
|
* usbhsh_irq_setup_err()
|
|
*/
|
|
init_completion(&hpriv->setup_ack_done);
|
|
|
|
/* copy original request */
|
|
memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
|
|
|
|
/*
|
|
* renesas_usbhs can not use original usb address.
|
|
* see HARDWARE LIMITATION.
|
|
* modify usb address here to use attached device.
|
|
* see usbhsh_device_attach()
|
|
*/
|
|
if (usbhsh_is_request_address(urb)) {
|
|
struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
|
|
struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);
|
|
|
|
/* udev is a attached device */
|
|
req.wValue = usbhsh_device_number(hpriv, udev);
|
|
dev_dbg(dev, "create new address - %d\n", req.wValue);
|
|
}
|
|
|
|
/* set request */
|
|
usbhs_usbreq_set_val(priv, &req);
|
|
|
|
/*
|
|
* wait setup packet ACK
|
|
*/
|
|
wait_for_completion(&hpriv->setup_ack_done);
|
|
|
|
dev_dbg(dev, "%s done\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* DCP data stage
|
|
*/
|
|
static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
|
|
struct usbhs_pkt *pkt)
|
|
{
|
|
struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
|
|
/* this ureq was connected to urb when usbhsh_urb_enqueue() */
|
|
|
|
usbhsh_ureq_free(hpriv, ureq);
|
|
}
|
|
|
|
static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
struct usbhs_pipe *pipe,
|
|
gfp_t mem_flags)
|
|
|
|
{
|
|
struct usbhsh_request *ureq;
|
|
|
|
/* this ureq will be freed on usbhsh_data_stage_packet_done() */
|
|
ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
|
|
if (unlikely(!ureq))
|
|
return -ENOMEM;
|
|
|
|
if (usb_pipein(urb->pipe))
|
|
pipe->handler = &usbhs_dcp_data_stage_in_handler;
|
|
else
|
|
pipe->handler = &usbhs_dcp_data_stage_out_handler;
|
|
|
|
usbhs_pkt_push(pipe, &ureq->pkt,
|
|
usbhsh_data_stage_packet_done,
|
|
urb->transfer_buffer,
|
|
urb->transfer_buffer_length,
|
|
(urb->transfer_flags & URB_ZERO_PACKET),
|
|
-1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* DCP status stage
|
|
*/
|
|
static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
|
|
struct urb *urb,
|
|
struct usbhs_pipe *pipe,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct usbhsh_request *ureq;
|
|
|
|
/* This ureq will be freed on usbhsh_queue_done() */
|
|
ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
|
|
if (unlikely(!ureq))
|
|
return -ENOMEM;
|
|
|
|
if (usb_pipein(urb->pipe))
|
|
pipe->handler = &usbhs_dcp_status_stage_in_handler;
|
|
else
|
|
pipe->handler = &usbhs_dcp_status_stage_out_handler;
|
|
|
|
usbhs_pkt_push(pipe, &ureq->pkt,
|
|
usbhsh_queue_done,
|
|
NULL,
|
|
urb->transfer_buffer_length,
|
|
0, -1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
|
|
struct urb *urb,
|
|
gfp_t mflags)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
|
|
struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
|
|
struct device *dev = usbhsh_hcd_to_dev(hcd);
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
/*
|
|
* setup stage
|
|
*
|
|
* usbhsh_send_setup_stage_packet() wait SACK/SIGN
|
|
*/
|
|
usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
|
|
|
|
/*
|
|
* data stage
|
|
*
|
|
* It is pushed only when urb has buffer.
|
|
*/
|
|
if (urb->transfer_buffer_length) {
|
|
ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags);
|
|
if (ret < 0) {
|
|
dev_err(dev, "data stage failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* status stage
|
|
*/
|
|
ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags);
|
|
if (ret < 0) {
|
|
dev_err(dev, "status stage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* start pushed packets
|
|
*/
|
|
usbhs_pkt_start(pipe);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* dma map functions
|
|
*/
|
|
static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* for hc_driver
|
|
*/
|
|
static int usbhsh_host_start(struct usb_hcd *hcd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void usbhsh_host_stop(struct usb_hcd *hcd)
|
|
{
|
|
}
|
|
|
|
static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
|
|
struct urb *urb,
|
|
gfp_t mem_flags)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
struct usb_host_endpoint *ep = urb->ep;
|
|
struct usbhsh_device *new_udev = NULL;
|
|
int is_dir_in = usb_pipein(urb->pipe);
|
|
int i;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");
|
|
|
|
if (!usbhsh_is_running(hpriv)) {
|
|
ret = -EIO;
|
|
goto usbhsh_urb_enqueue_error_not_linked;
|
|
}
|
|
|
|
ret = usb_hcd_link_urb_to_ep(hcd, urb);
|
|
if (ret)
|
|
goto usbhsh_urb_enqueue_error_not_linked;
|
|
|
|
/*
|
|
* attach udev if needed
|
|
* see [image of mod_host]
|
|
*/
|
|
if (!usbhsh_device_get(hpriv, urb)) {
|
|
new_udev = usbhsh_device_attach(hpriv, urb);
|
|
if (!new_udev) {
|
|
ret = -EIO;
|
|
goto usbhsh_urb_enqueue_error_not_linked;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* attach endpoint if needed
|
|
* see [image of mod_host]
|
|
*/
|
|
if (!usbhsh_ep_to_uep(ep)) {
|
|
ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags);
|
|
if (ret < 0)
|
|
goto usbhsh_urb_enqueue_error_free_device;
|
|
}
|
|
|
|
/*
|
|
* attach pipe to endpoint
|
|
* see [image of mod_host]
|
|
*/
|
|
for (i = 0; i < 1024; i++) {
|
|
ret = usbhsh_pipe_attach(hpriv, urb);
|
|
if (ret < 0)
|
|
msleep(100);
|
|
else
|
|
break;
|
|
}
|
|
if (ret < 0)
|
|
goto usbhsh_urb_enqueue_error_free_endpoint;
|
|
|
|
/*
|
|
* push packet
|
|
*/
|
|
if (usb_pipecontrol(urb->pipe))
|
|
ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags);
|
|
else
|
|
ret = usbhsh_queue_push(hcd, urb, mem_flags);
|
|
|
|
return ret;
|
|
|
|
usbhsh_urb_enqueue_error_free_endpoint:
|
|
usbhsh_endpoint_detach(hpriv, ep);
|
|
usbhsh_urb_enqueue_error_free_device:
|
|
if (new_udev)
|
|
usbhsh_device_detach(hpriv, new_udev);
|
|
usbhsh_urb_enqueue_error_not_linked:
|
|
|
|
dev_dbg(dev, "%s error\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
|
|
|
|
if (ureq) {
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usbhs_pkt *pkt = &ureq->pkt;
|
|
|
|
usbhs_pkt_pop(pkt->pipe, pkt);
|
|
usbhsh_queue_done(priv, pkt);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
|
|
struct usbhsh_device *udev;
|
|
struct usbhsh_hpriv *hpriv;
|
|
|
|
/*
|
|
* this function might be called manytimes by same hcd/ep
|
|
* in-endpoint == out-endpoint if ep == dcp.
|
|
*/
|
|
if (!uep)
|
|
return;
|
|
|
|
udev = usbhsh_uep_to_udev(uep);
|
|
hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
|
|
usbhsh_endpoint_detach(hpriv, ep);
|
|
|
|
/*
|
|
* if there is no endpoint,
|
|
* free device
|
|
*/
|
|
if (!usbhsh_device_has_endpoint(udev))
|
|
usbhsh_device_detach(hpriv, udev);
|
|
}
|
|
|
|
static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int roothub_id = 1; /* only 1 root hub */
|
|
|
|
/*
|
|
* does port stat was changed ?
|
|
* check USB_PORT_STAT_C_xxx << 16
|
|
*/
|
|
if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
|
|
*buf = (1 << roothub_id);
|
|
else
|
|
*buf = 0;
|
|
|
|
dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
|
|
|
|
return !!(*buf);
|
|
}
|
|
|
|
static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
|
|
u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
switch (wValue) {
|
|
case C_HUB_OVER_CURRENT:
|
|
case C_HUB_LOCAL_POWER:
|
|
dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
return -EPIPE;
|
|
}
|
|
|
|
static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
|
|
u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int enable = (typeReq == SetPortFeature);
|
|
int speed, i, timeout = 128;
|
|
int roothub_id = 1; /* only 1 root hub */
|
|
|
|
/* common error */
|
|
if (wIndex > roothub_id || wLength != 0)
|
|
return -EPIPE;
|
|
|
|
/* check wValue */
|
|
switch (wValue) {
|
|
case USB_PORT_FEAT_POWER:
|
|
usbhs_vbus_ctrl(priv, enable);
|
|
dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
|
|
break;
|
|
|
|
case USB_PORT_FEAT_ENABLE:
|
|
case USB_PORT_FEAT_SUSPEND:
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
case USB_PORT_FEAT_C_SUSPEND:
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
case USB_PORT_FEAT_C_OVER_CURRENT:
|
|
case USB_PORT_FEAT_C_RESET:
|
|
dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
|
|
break;
|
|
|
|
case USB_PORT_FEAT_RESET:
|
|
if (!enable)
|
|
break;
|
|
|
|
usbhsh_port_stat_clear(hpriv,
|
|
USB_PORT_STAT_HIGH_SPEED |
|
|
USB_PORT_STAT_LOW_SPEED);
|
|
|
|
usbhs_bus_send_reset(priv);
|
|
msleep(20);
|
|
usbhs_bus_send_sof_enable(priv);
|
|
|
|
for (i = 0; i < timeout ; i++) {
|
|
switch (usbhs_bus_get_speed(priv)) {
|
|
case USB_SPEED_LOW:
|
|
speed = USB_PORT_STAT_LOW_SPEED;
|
|
goto got_usb_bus_speed;
|
|
case USB_SPEED_HIGH:
|
|
speed = USB_PORT_STAT_HIGH_SPEED;
|
|
goto got_usb_bus_speed;
|
|
case USB_SPEED_FULL:
|
|
speed = 0;
|
|
goto got_usb_bus_speed;
|
|
}
|
|
|
|
msleep(20);
|
|
}
|
|
return -EPIPE;
|
|
|
|
got_usb_bus_speed:
|
|
usbhsh_port_stat_set(hpriv, speed);
|
|
usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
|
|
|
|
dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
|
|
__func__, speed);
|
|
|
|
/* status change is not needed */
|
|
return 0;
|
|
|
|
default:
|
|
return -EPIPE;
|
|
}
|
|
|
|
/* set/clear status */
|
|
if (enable)
|
|
usbhsh_port_stat_set(hpriv, (1 << wValue));
|
|
else
|
|
usbhsh_port_stat_clear(hpriv, (1 << wValue));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
|
|
u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int roothub_id = 1; /* only 1 root hub */
|
|
|
|
switch (typeReq) {
|
|
case GetHubStatus:
|
|
dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
|
|
|
|
*buf = 0x00;
|
|
break;
|
|
|
|
case GetPortStatus:
|
|
if (wIndex != roothub_id)
|
|
return -EPIPE;
|
|
|
|
dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
|
|
*(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
|
|
break;
|
|
|
|
case GetHubDescriptor:
|
|
desc->bDescriptorType = 0x29;
|
|
desc->bHubContrCurrent = 0;
|
|
desc->bNbrPorts = roothub_id;
|
|
desc->bDescLength = 9;
|
|
desc->bPwrOn2PwrGood = 0;
|
|
desc->wHubCharacteristics = cpu_to_le16(0x0011);
|
|
desc->u.hs.DeviceRemovable[0] = (roothub_id << 1);
|
|
desc->u.hs.DeviceRemovable[1] = ~0;
|
|
dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
|
|
u16 wIndex, char *buf, u16 wLength)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int ret = -EPIPE;
|
|
|
|
switch (typeReq) {
|
|
|
|
/* Hub Feature */
|
|
case ClearHubFeature:
|
|
case SetHubFeature:
|
|
ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
|
|
wValue, wIndex, buf, wLength);
|
|
break;
|
|
|
|
/* Port Feature */
|
|
case SetPortFeature:
|
|
case ClearPortFeature:
|
|
ret = __usbhsh_hub_port_feature(hpriv, typeReq,
|
|
wValue, wIndex, buf, wLength);
|
|
break;
|
|
|
|
/* Get status */
|
|
case GetHubStatus:
|
|
case GetPortStatus:
|
|
case GetHubDescriptor:
|
|
ret = __usbhsh_hub_get_status(hpriv, typeReq,
|
|
wValue, wIndex, buf, wLength);
|
|
break;
|
|
}
|
|
|
|
dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
|
|
typeReq, ret, usbhsh_port_stat_get(hpriv));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct hc_driver usbhsh_driver = {
|
|
.description = usbhsh_hcd_name,
|
|
.hcd_priv_size = sizeof(struct usbhsh_hpriv),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.flags = HCD_USB2,
|
|
|
|
.start = usbhsh_host_start,
|
|
.stop = usbhsh_host_stop,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = usbhsh_urb_enqueue,
|
|
.urb_dequeue = usbhsh_urb_dequeue,
|
|
.endpoint_disable = usbhsh_endpoint_disable,
|
|
|
|
/*
|
|
* root hub
|
|
*/
|
|
.hub_status_data = usbhsh_hub_status_data,
|
|
.hub_control = usbhsh_hub_control,
|
|
};
|
|
|
|
/*
|
|
* interrupt functions
|
|
*/
|
|
static int usbhsh_irq_attch(struct usbhs_priv *priv,
|
|
struct usbhs_irq_state *irq_state)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
dev_dbg(dev, "device attached\n");
|
|
|
|
usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
|
|
usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
|
|
|
|
/*
|
|
* attch interrupt might happen infinitely on some device
|
|
* (on self power USB hub ?)
|
|
* disable it here.
|
|
*
|
|
* usbhsh_is_running() becomes effective
|
|
* according to this process.
|
|
* see
|
|
* usbhsh_is_running()
|
|
* usbhsh_urb_enqueue()
|
|
*/
|
|
hpriv->mod.irq_attch = NULL;
|
|
usbhs_irq_callback_update(priv, &hpriv->mod);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhsh_irq_dtch(struct usbhs_priv *priv,
|
|
struct usbhs_irq_state *irq_state)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
dev_dbg(dev, "device detached\n");
|
|
|
|
usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
|
|
usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
|
|
|
|
/*
|
|
* enable attch interrupt again
|
|
*
|
|
* usbhsh_is_running() becomes invalid
|
|
* according to this process.
|
|
* see
|
|
* usbhsh_is_running()
|
|
* usbhsh_urb_enqueue()
|
|
*/
|
|
hpriv->mod.irq_attch = usbhsh_irq_attch;
|
|
usbhs_irq_callback_update(priv, &hpriv->mod);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
|
|
struct usbhs_irq_state *irq_state)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
dev_dbg(dev, "setup packet OK\n");
|
|
|
|
complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
|
|
struct usbhs_irq_state *irq_state)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
dev_dbg(dev, "setup packet Err\n");
|
|
|
|
complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* module start/stop
|
|
*/
|
|
static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct usbhs_pipe *pipe;
|
|
u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
|
|
int pipe_size = usbhs_get_dparam(priv, pipe_size);
|
|
int old_type, dir_in, i;
|
|
|
|
/* init all pipe */
|
|
old_type = USB_ENDPOINT_XFER_CONTROL;
|
|
for (i = 0; i < pipe_size; i++) {
|
|
|
|
/*
|
|
* data "output" will be finished as soon as possible,
|
|
* but there is no guaranty at data "input" case.
|
|
*
|
|
* "input" needs "standby" pipe.
|
|
* So, "input" direction pipe > "output" direction pipe
|
|
* is good idea.
|
|
*
|
|
* 1st USB_ENDPOINT_XFER_xxx will be output direction,
|
|
* and the other will be input direction here.
|
|
*
|
|
* ex)
|
|
* ...
|
|
* USB_ENDPOINT_XFER_ISOC -> dir out
|
|
* USB_ENDPOINT_XFER_ISOC -> dir in
|
|
* USB_ENDPOINT_XFER_BULK -> dir out
|
|
* USB_ENDPOINT_XFER_BULK -> dir in
|
|
* USB_ENDPOINT_XFER_BULK -> dir in
|
|
* ...
|
|
*/
|
|
dir_in = (pipe_type[i] == old_type);
|
|
old_type = pipe_type[i];
|
|
|
|
if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) {
|
|
pipe = usbhs_dcp_malloc(priv);
|
|
usbhsh_hpriv_to_dcp(hpriv) = pipe;
|
|
} else {
|
|
pipe = usbhs_pipe_malloc(priv,
|
|
pipe_type[i],
|
|
dir_in);
|
|
}
|
|
|
|
pipe->mod_private = NULL;
|
|
}
|
|
}
|
|
|
|
static int usbhsh_start(struct usbhs_priv *priv)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int ret;
|
|
|
|
/* add hcd */
|
|
ret = usb_add_hcd(hcd, 0, 0);
|
|
if (ret < 0)
|
|
return 0;
|
|
|
|
/*
|
|
* pipe initialize and enable DCP
|
|
*/
|
|
usbhs_pipe_init(priv,
|
|
usbhsh_dma_map_ctrl);
|
|
usbhs_fifo_init(priv);
|
|
usbhsh_pipe_init_for_host(priv);
|
|
|
|
/*
|
|
* system config enble
|
|
* - HI speed
|
|
* - host
|
|
* - usb module
|
|
*/
|
|
usbhs_sys_host_ctrl(priv, 1);
|
|
|
|
/*
|
|
* enable irq callback
|
|
*/
|
|
mod->irq_attch = usbhsh_irq_attch;
|
|
mod->irq_dtch = usbhsh_irq_dtch;
|
|
mod->irq_sack = usbhsh_irq_setup_ack;
|
|
mod->irq_sign = usbhsh_irq_setup_err;
|
|
usbhs_irq_callback_update(priv, mod);
|
|
|
|
dev_dbg(dev, "start host\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usbhsh_stop(struct usbhs_priv *priv)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
|
|
/*
|
|
* disable irq callback
|
|
*/
|
|
mod->irq_attch = NULL;
|
|
mod->irq_dtch = NULL;
|
|
mod->irq_sack = NULL;
|
|
mod->irq_sign = NULL;
|
|
usbhs_irq_callback_update(priv, mod);
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
/* disable sys */
|
|
usbhs_sys_host_ctrl(priv, 0);
|
|
|
|
dev_dbg(dev, "quit host\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usbhs_mod_host_probe(struct usbhs_priv *priv)
|
|
{
|
|
struct usbhsh_hpriv *hpriv;
|
|
struct usb_hcd *hcd;
|
|
struct usbhsh_device *udev;
|
|
struct device *dev = usbhs_priv_to_dev(priv);
|
|
int i;
|
|
|
|
/* initialize hcd */
|
|
hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
|
|
if (!hcd) {
|
|
dev_err(dev, "Failed to create hcd\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* CAUTION
|
|
*
|
|
* There is no guarantee that it is possible to access usb module here.
|
|
* Don't accesses to it.
|
|
* The accesse will be enable after "usbhsh_start"
|
|
*/
|
|
|
|
hpriv = usbhsh_hcd_to_hpriv(hcd);
|
|
|
|
/*
|
|
* register itself
|
|
*/
|
|
usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
|
|
|
|
/* init hpriv */
|
|
hpriv->mod.name = "host";
|
|
hpriv->mod.start = usbhsh_start;
|
|
hpriv->mod.stop = usbhsh_stop;
|
|
usbhsh_port_stat_init(hpriv);
|
|
|
|
/* init all device */
|
|
usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
|
|
udev->usbv = NULL;
|
|
INIT_LIST_HEAD(&udev->ep_list_head);
|
|
}
|
|
|
|
dev_info(dev, "host probed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usbhs_mod_host_remove(struct usbhs_priv *priv)
|
|
{
|
|
struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
|
|
struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|