leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6c118e43dc
linux/drivers/serial/cpm_uart/cpm_uart_cpm2.c
Laurent Pinchart d464df2667 [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms. 
This patch allocates parameter RAM for SMC serial ports without relying on
previous initialisation by a boot loader or a wrapper layer.

SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the
general-purpose areas of the dual-port RAM. The current code relies on the
boot loader to allocate a section of general-purpose CPM RAM and gets the
section address from the device tree.

This patch modifies the device tree address usage to reference the SMC
parameter RAM base pointer instead of a pre-allocated RAM section and
allocates memory from the CPM dual-port RAM when initialising the SMC port.
CPM1-based platforms are not affected.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:36 -05:00

451 lines
12 KiB
C
Raw Blame History

/*
* linux/drivers/serial/cpm_uart_cpm2.c
*
* Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
*
* Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
*
* Copyright (C) 2004 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
* (C) 2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/fs_pd.h>
#ifdef CONFIG_PPC_CPM_NEW_BINDING
#include <asm/prom.h>
#endif
#include <linux/serial_core.h>
#include <linux/kernel.h>
#include "cpm_uart.h"
/**************************************************************/
#ifdef CONFIG_PPC_CPM_NEW_BINDING
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
cpm_command(port->command, cmd);
}
void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
struct device_node *np)
{
void __iomem *pram;
unsigned long offset;
struct resource res;
unsigned long len;
/* Don't remap parameter RAM if it has already been initialized
* during console setup.
*/
if (IS_SMC(port) && port->smcup)
return port->smcup;
else if (!IS_SMC(port) && port->sccup)
return port->sccup;
if (of_address_to_resource(np, 1, &res))
return NULL;
len = 1 + res.end - res.start;
pram = ioremap(res.start, len);
if (!pram)
return NULL;
if (!IS_SMC(port))
return pram;
if (len != 2) {
printk(KERN_WARNING "cpm_uart[%d]: device tree references "
"SMC pram, using boot loader/wrapper pram mapping. "
"Please fix your device tree to reference the pram "
"base register instead.\n",
port->port.line);
return pram;
}
offset = cpm_dpalloc(PROFF_SMC_SIZE, 64);
out_be16(pram, offset);
iounmap(pram);
return cpm_muram_addr(offset);
}
void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
{
if (!IS_SMC(port))
iounmap(pram);
}
#else
void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
ulong val;
int line = port - cpm_uart_ports;
volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
switch (line) {
case UART_SMC1:
val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
case UART_SMC2:
val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
case UART_SCC1:
val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
case UART_SCC2:
val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
case UART_SCC3:
val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
case UART_SCC4:
val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
cmd) | CPM_CR_FLG;
break;
default:
return;
}
cp->cp_cpcr = val;
while (cp->cp_cpcr & CPM_CR_FLG) ;
cpm2_unmap(cp);
}
void smc1_lineif(struct uart_cpm_port *pinfo)
{
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* SMC1 is only on port D */
io->iop_ppard |= 0x00c00000;
io->iop_pdird |= 0x00400000;
io->iop_pdird &= ~0x00800000;
io->iop_psord &= ~0x00c00000;
/* Wire BRG1 to SMC1 */
cpmux->cmx_smr &= 0x0f;
pinfo->brg = 1;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
void smc2_lineif(struct uart_cpm_port *pinfo)
{
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* SMC2 is only on port A */
io->iop_ppara |= 0x00c00000;
io->iop_pdira |= 0x00400000;
io->iop_pdira &= ~0x00800000;
io->iop_psora &= ~0x00c00000;
/* Wire BRG2 to SMC2 */
cpmux->cmx_smr &= 0xf0;
pinfo->brg = 2;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
void scc1_lineif(struct uart_cpm_port *pinfo)
{
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
/* Use Port D for SCC1 instead of other functions. */
io->iop_ppard |= 0x00000003;
io->iop_psord &= ~0x00000001; /* Rx */
io->iop_psord |= 0x00000002; /* Tx */
io->iop_pdird &= ~0x00000001; /* Rx */
io->iop_pdird |= 0x00000002; /* Tx */
/* Wire BRG1 to SCC1 */
cpmux->cmx_scr &= 0x00ffffff;
cpmux->cmx_scr |= 0x00000000;
pinfo->brg = 1;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
void scc2_lineif(struct uart_cpm_port *pinfo)
{
/*
* STx GP3 uses the SCC2 secondary option pin assignment
* which this driver doesn't account for in the static
* pin assignments. This kind of board specific info
* really has to get out of the driver so boards can
* be supported in a sane fashion.
*/
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
#ifndef CONFIG_STX_GP3
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
#endif
cpmux->cmx_scr &= 0xff00ffff;
cpmux->cmx_scr |= 0x00090000;
pinfo->brg = 2;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
void scc3_lineif(struct uart_cpm_port *pinfo)
{
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
cpmux->cmx_scr &= 0xffff00ff;
cpmux->cmx_scr |= 0x00001200;
pinfo->brg = 3;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
void scc4_lineif(struct uart_cpm_port *pinfo)
{
volatile iop_cpm2_t *io = cpm2_map(im_ioport);
volatile cpmux_t *cpmux = cpm2_map(im_cpmux);
io->iop_ppard |= 0x00000600;
io->iop_psord &= ~0x00000600; /* Tx/Rx */
io->iop_pdird &= ~0x00000200; /* Rx */
io->iop_pdird |= 0x00000400; /* Tx */
cpmux->cmx_scr &= 0xffffff00;
cpmux->cmx_scr |= 0x0000001b;
pinfo->brg = 4;
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
#endif
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
* receive buffer descriptors from dual port ram, and a character
* buffer area from host mem. If we are allocating for the console we need
* to do it from bootmem
*/
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
u8 __iomem *dp_mem;
unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
return -ENOMEM;
}
dp_mem = cpm_dpram_addr(dp_offset);
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
mem_addr = alloc_bootmem(memsz);
dma_addr = virt_to_bus(mem_addr);
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
GFP_KERNEL);
if (mem_addr == NULL) {
cpm_dpfree(dp_offset);
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate coherent memory\n");
return -ENOMEM;
}
pinfo->dp_addr = dp_offset;
pinfo->mem_addr = mem_addr;
pinfo->dma_addr = dma_addr;
pinfo->mem_size = memsz;
pinfo->rx_buf = mem_addr;
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
}
void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
{
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->dma_addr);
cpm_dpfree(pinfo->dp_addr);
}
#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* Setup any dynamic params in the uart desc */
int cpm_uart_init_portdesc(void)
{
#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
u16 *addr;
#endif
pr_debug("CPM uart[-]:init portdesc\n");
cpm_uart_nr = 0;
#ifdef CONFIG_SERIAL_CPM_SMC1
cpm_uart_ports[UART_SMC1].smcp = (smc_t *) cpm2_map(im_smc[0]);
cpm_uart_ports[UART_SMC1].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SMC1].smcp;
cpm_uart_ports[UART_SMC1].smcup =
(smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC1], PROFF_SMC_SIZE);
addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC1_BASE], 2);
*addr = PROFF_SMC1;
cpm2_unmap(addr);
cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
cpm_uart_ports[UART_SMC2].smcp = (smc_t *) cpm2_map(im_smc[1]);
cpm_uart_ports[UART_SMC2].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SMC2].smcp;
cpm_uart_ports[UART_SMC2].smcup =
(smc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SMC2], PROFF_SMC_SIZE);
addr = (u16 *)cpm2_map_size(im_dprambase[PROFF_SMC2_BASE], 2);
*addr = PROFF_SMC2;
cpm2_unmap(addr);
cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC1
cpm_uart_ports[UART_SCC1].sccp = (scc_t *) cpm2_map(im_scc[0]);
cpm_uart_ports[UART_SCC1].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SCC1].sccp;
cpm_uart_ports[UART_SCC1].sccup =
(scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC1], PROFF_SCC_SIZE);
cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
cpm_uart_ports[UART_SCC2].sccp = (scc_t *) cpm2_map(im_scc[1]);
cpm_uart_ports[UART_SCC2].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SCC2].sccp;
cpm_uart_ports[UART_SCC2].sccup =
(scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC2], PROFF_SCC_SIZE);
cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
cpm_uart_ports[UART_SCC3].sccp = (scc_t *) cpm2_map(im_scc[2]);
cpm_uart_ports[UART_SCC3].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SCC3].sccp;
cpm_uart_ports[UART_SCC3].sccup =
(scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC3], PROFF_SCC_SIZE);
cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
cpm_uart_ports[UART_SCC4].sccp = (scc_t *) cpm2_map(im_scc[3]);
cpm_uart_ports[UART_SCC4].port.mapbase =
(unsigned long)cpm_uart_ports[UART_SCC4].sccp;
cpm_uart_ports[UART_SCC4].sccup =
(scc_uart_t *) cpm2_map_size(im_dprambase[PROFF_SCC4], PROFF_SCC_SIZE);
cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
~(UART_SCCM_TX | UART_SCCM_RX);
cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
#endif
return 0;
}
#endif
Reference in New Issue View Git Blame Copy Permalink