forked from Minki/linux
3a2766cc68
Please don't add these for vcc_sd, and mmc-core/driver will control it. Otherwise, it will waste energy even without sdmmc in slot. Moreover, it will causes a bug: If we insert/remove sd card, we could see [9.337271] mmc0: new ultra high speed SDR25 SDHC card at address 0007 [9.345144] mmcblk0: mmc0:0007 SD32G 29.3 GiB This is okay for normal sd insert/remove test, but when I debug some issues for sdmmc, I did unbind/bind test. And there is a interesting phenomenon when we bind the driver again: [58.314069] mmc0: new high speed SDHC card at address 0007 [58.320282] mmcblk0: mmc0:0007 SD32G 29.3 GiB So the sd card could just support high speed without power cycle since the vcc_sd is always on, which makes the sd card fail to reinit its internal ocr mask. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
329 lines
7.3 KiB
Plaintext
329 lines
7.3 KiB
Plaintext
/*
|
|
* Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3188.dtsi"
|
|
|
|
/ {
|
|
model = "Rockchip PX3-EVB";
|
|
compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
memory@60000000 {
|
|
reg = <0x60000000 0x80000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
|
|
power {
|
|
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
label = "GPIO Key Power";
|
|
linux,input-type = <1>;
|
|
wakeup-source;
|
|
debounce-interval = <100>;
|
|
};
|
|
};
|
|
|
|
vcc_sys: vsys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vsys";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
accelerometer@18 {
|
|
compatible = "bosch,bma250";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
rk808: pmic@1c {
|
|
compatible = "rockchip,rk818";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk808-clkout2";
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
vcc7-supply = <&vcc_sys>;
|
|
vcc8-supply = <&vcc_io>;
|
|
vcc9-supply = <&vcc_io>;
|
|
|
|
regulators {
|
|
vdd_cpu: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-name = "vdd_arm";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_io: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_io";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_cif: LDO_REG1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_cif";
|
|
};
|
|
|
|
vcc_jetta33: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_jetta33";
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-name = "vdd_10";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
lvds_12: LDO_REG4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "lvds_12";
|
|
};
|
|
|
|
lvds_25: LDO_REG5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "lvds_25";
|
|
};
|
|
|
|
cif_18: LDO_REG6 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-name = "cif_18";
|
|
};
|
|
|
|
vcc_sd: LDO_REG7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_sd";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
wl_18: LDO_REG8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "wl_18";
|
|
};
|
|
|
|
lcd_33: SWITCH_REG1 {
|
|
regulator-name = "lcd_33";
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&i2c2 {
|
|
gsl1680: touchscreen@40 {
|
|
compatible = "silead,gsl1680";
|
|
reg = <0x40>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
|
|
power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
touchscreen-size-x = <800>;
|
|
touchscreen-size-y = <1280>;
|
|
silead,max-fingers = <5>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
num-slots = <1>;
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
|
|
vmmc-supply = <&vcc_sd>;
|
|
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
};
|
|
|
|
&pinctrl {
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
usb {
|
|
host_vbus_drv: host-vbus-drv {
|
|
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
otg_vbus_drv: otg-vbus-drv {
|
|
rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|