forked from Minki/linux
888950b0cb
Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
1064 lines
27 KiB
Plaintext
1064 lines
27 KiB
Plaintext
/*
|
|
* SAMSUNG EXYNOS5250 SoC device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
|
|
* EXYNOS5250 based board files can include this file and provide
|
|
* values for board specfic bindings.
|
|
*
|
|
* Note: This file does not include device nodes for all the controllers in
|
|
* EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
|
|
* additional nodes can be added to this file.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/exynos5250.h>
|
|
#include "exynos5.dtsi"
|
|
#include "exynos4-cpu-thermal.dtsi"
|
|
#include <dt-bindings/clock/exynos-audss-clk.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos5250", "samsung,exynos5";
|
|
|
|
aliases {
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
spi2 = &spi_2;
|
|
gsc0 = &gsc_0;
|
|
gsc1 = &gsc_1;
|
|
gsc2 = &gsc_2;
|
|
gsc3 = &gsc_3;
|
|
mshc0 = &mmc_0;
|
|
mshc1 = &mmc_1;
|
|
mshc2 = &mmc_2;
|
|
mshc3 = &mmc_3;
|
|
i2c4 = &i2c_4;
|
|
i2c5 = &i2c_5;
|
|
i2c6 = &i2c_6;
|
|
i2c7 = &i2c_7;
|
|
i2c8 = &i2c_8;
|
|
i2c9 = &i2c_9;
|
|
pinctrl0 = &pinctrl_0;
|
|
pinctrl1 = &pinctrl_1;
|
|
pinctrl2 = &pinctrl_2;
|
|
pinctrl3 = &pinctrl_3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
clock-frequency = <1700000000>;
|
|
clocks = <&clock CLK_ARM_CLK>;
|
|
clock-names = "cpu";
|
|
clock-latency = <140000>;
|
|
|
|
operating-points = <
|
|
1700000 1300000
|
|
1600000 1250000
|
|
1500000 1225000
|
|
1400000 1200000
|
|
1300000 1150000
|
|
1200000 1125000
|
|
1100000 1100000
|
|
1000000 1075000
|
|
900000 1050000
|
|
800000 1025000
|
|
700000 1012500
|
|
600000 1000000
|
|
500000 975000
|
|
400000 950000
|
|
300000 937500
|
|
200000 925000
|
|
>;
|
|
cooling-min-level = <15>;
|
|
cooling-max-level = <9>;
|
|
#cooling-cells = <2>; /* min followed by max */
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
clock-frequency = <1700000000>;
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
sysram@02020000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x02020000 0x30000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x02020000 0x30000>;
|
|
|
|
smp-sysram@0 {
|
|
compatible = "samsung,exynos4210-sysram";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
smp-sysram@2f000 {
|
|
compatible = "samsung,exynos4210-sysram-ns";
|
|
reg = <0x2f000 0x1000>;
|
|
};
|
|
};
|
|
|
|
pd_gsc: gsc-power-domain@10044000 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044000 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_mfc: mfc-power-domain@10044040 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10044040 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_disp1: disp1-power-domain@100440A0 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x100440A0 0x20>;
|
|
#power-domain-cells = <0>;
|
|
clocks = <&clock CLK_FIN_PLL>,
|
|
<&clock CLK_MOUT_ACLK200_DISP1_SUB>,
|
|
<&clock CLK_MOUT_ACLK300_DISP1_SUB>;
|
|
clock-names = "oscclk", "clk0", "clk1";
|
|
};
|
|
|
|
clock: clock-controller@10010000 {
|
|
compatible = "samsung,exynos5250-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clock_audss: audss-clock-controller@3810000 {
|
|
compatible = "samsung,exynos5250-audss-clock";
|
|
reg = <0x03810000 0x0C>;
|
|
#clock-cells = <1>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
|
|
<&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
|
|
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
/*
|
|
* Unfortunately we need this since some versions
|
|
* of U-Boot on Exynos don't set the CNTFRQ register,
|
|
* so we need the value from DT.
|
|
*/
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
mct@101C0000 {
|
|
compatible = "samsung,exynos4210-mct";
|
|
reg = <0x101C0000 0x800>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&mct_map>;
|
|
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
|
|
<4 0>, <5 0>;
|
|
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
|
|
clock-names = "fin_pll", "mct";
|
|
|
|
mct_map: mct-map {
|
|
#interrupt-cells = <2>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = <0x0 0 &combiner 23 3>,
|
|
<0x1 0 &combiner 23 4>,
|
|
<0x2 0 &combiner 25 2>,
|
|
<0x3 0 &combiner 25 3>,
|
|
<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a15-pmu";
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <1 2>, <22 4>;
|
|
};
|
|
|
|
pinctrl_0: pinctrl@11400000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x11400000 0x1000>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
wakup_eint: wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
pinctrl_1: pinctrl@13400000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x13400000 0x1000>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pinctrl_2: pinctrl@10d10000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x10d10000 0x1000>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pinctrl_3: pinctrl@03860000 {
|
|
compatible = "samsung,exynos5250-pinctrl";
|
|
reg = <0x03860000 0x1000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10040000 {
|
|
compatible = "samsung,exynos5250-pmu", "syscon";
|
|
reg = <0x10040000 0x5000>;
|
|
clock-names = "clkout16";
|
|
clocks = <&clock CLK_FIN_PLL>;
|
|
#clock-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
watchdog@101D0000 {
|
|
compatible = "samsung,exynos5250-wdt";
|
|
reg = <0x101D0000 0x100>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_WDT>;
|
|
clock-names = "watchdog";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
g2d@10850000 {
|
|
compatible = "samsung,exynos5250-g2d";
|
|
reg = <0x10850000 0x1000>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_G2D>;
|
|
clock-names = "fimg2d";
|
|
iommus = <&sysmmu_g2d>;
|
|
};
|
|
|
|
mfc: codec@11000000 {
|
|
compatible = "samsung,mfc-v6";
|
|
reg = <0x11000000 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_mfc>;
|
|
clocks = <&clock CLK_MFC>;
|
|
clock-names = "mfc";
|
|
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
|
|
iommu-names = "left", "right";
|
|
};
|
|
|
|
rotator: rotator@11C00000 {
|
|
compatible = "samsung,exynos5250-rotator";
|
|
reg = <0x11C00000 0x64>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_ROTATOR>;
|
|
clock-names = "rotator";
|
|
iommus = <&sysmmu_rotator>;
|
|
};
|
|
|
|
tmu: tmu@10060000 {
|
|
compatible = "samsung,exynos5250-tmu";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_TMU>;
|
|
clock-names = "tmu_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
};
|
|
|
|
sata: sata@122F0000 {
|
|
compatible = "snps,dwc-ahci";
|
|
samsung,sata-freq = <66>;
|
|
reg = <0x122F0000 0x1ff>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
|
|
clock-names = "sata", "sclk_sata";
|
|
phys = <&sata_phy>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
sata_phy: sata-phy@12170000 {
|
|
compatible = "samsung,exynos5250-sata-phy";
|
|
reg = <0x12170000 0x1ff>;
|
|
clocks = <&clock CLK_SATA_PHYCTRL>;
|
|
clock-names = "sata_phyctrl";
|
|
#phy-cells = <0>;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* i2c_0-3 are defined in exynos5.dtsi */
|
|
i2c_4: i2c@12CA0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CA0000 0x100>;
|
|
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C4>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_5: i2c@12CB0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CB0000 0x100>;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C5>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_6: i2c@12CC0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CC0000 0x100>;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C6>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_7: i2c@12CD0000 {
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x12CD0000 0x100>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C7>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_8: i2c@12CE0000 {
|
|
compatible = "samsung,s3c2440-hdmiphy-i2c";
|
|
reg = <0x12CE0000 0x1000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_I2C_HDMI>;
|
|
clock-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_9: i2c@121D0000 {
|
|
compatible = "samsung,exynos5-sata-phy-i2c";
|
|
reg = <0x121D0000 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SATA_PHYI2C>;
|
|
clock-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@12d20000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d20000 0x100>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma0 5
|
|
&pdma0 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
};
|
|
|
|
spi_1: spi@12d30000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d30000 0x100>;
|
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma1 5
|
|
&pdma1 4>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
};
|
|
|
|
spi_2: spi@12d40000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
status = "disabled";
|
|
reg = <0x12d40000 0x100>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma0 7
|
|
&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus>;
|
|
};
|
|
|
|
mmc_0: mmc@12200000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12200000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_1: mmc@12210000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12210000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_2: mmc@12220000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x12220000 0x1000>;
|
|
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc_3: mmc@12230000 {
|
|
compatible = "samsung,exynos5250-dw-mshc";
|
|
reg = <0x12230000 0x1000>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
compatible = "samsung,s5pv210-i2s";
|
|
status = "disabled";
|
|
reg = <0x03830000 0x100>;
|
|
dmas = <&pdma0 10
|
|
&pdma0 9
|
|
&pdma0 8>;
|
|
dma-names = "tx", "rx", "tx-sec";
|
|
clocks = <&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_I2S_BUS>,
|
|
<&clock_audss EXYNOS_SCLK_I2S>;
|
|
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
|
|
samsung,idma-addr = <0x03000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_bus>;
|
|
};
|
|
|
|
i2s1: i2s@12D60000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
status = "disabled";
|
|
reg = <0x12D60000 0x100>;
|
|
dmas = <&pdma1 12
|
|
&pdma1 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1_bus>;
|
|
};
|
|
|
|
i2s2: i2s@12D70000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
status = "disabled";
|
|
reg = <0x12D70000 0x100>;
|
|
dmas = <&pdma0 12
|
|
&pdma0 11>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s2_bus>;
|
|
};
|
|
|
|
usb_dwc3 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock CLK_USB3>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbdrd_dwc3: dwc3@12000000 {
|
|
compatible = "synopsys,dwc3";
|
|
reg = <0x12000000 0x10000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
|
|
usbdrd_phy: phy@12100000 {
|
|
compatible = "samsung,exynos5250-usbdrd-phy";
|
|
reg = <0x12100000 0x100>;
|
|
clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
ehci: usb@12110000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12110000 0x100>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&clock CLK_USB2>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy_gen 1>;
|
|
};
|
|
};
|
|
|
|
ohci: usb@12120000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12120000 0x100>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&clock CLK_USB2>;
|
|
clock-names = "usbhost";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2_phy_gen 1>;
|
|
};
|
|
};
|
|
|
|
usb2_phy_gen: phy@12130000 {
|
|
compatible = "samsung,exynos5250-usb2-phy";
|
|
reg = <0x12130000 0x100>;
|
|
clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
samsung,sysreg-phandle = <&sysreg_system_controller>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
amba {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
pdma0: pdma@121A0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121A0000 0x1000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@121B0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x121B0000 0x1000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
mdma0: mdma@10800000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10800000 0x1000>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_MDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
|
|
mdma1: mdma@11C10000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x11C10000 0x1000>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_MDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <1>;
|
|
};
|
|
};
|
|
|
|
gsc_0: gsc@13e00000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e00000 0x1000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL0>;
|
|
clock-names = "gscl";
|
|
iommu = <&sysmmu_gsc0>;
|
|
};
|
|
|
|
gsc_1: gsc@13e10000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e10000 0x1000>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL1>;
|
|
clock-names = "gscl";
|
|
iommu = <&sysmmu_gsc1>;
|
|
};
|
|
|
|
gsc_2: gsc@13e20000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e20000 0x1000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL2>;
|
|
clock-names = "gscl";
|
|
iommu = <&sysmmu_gsc2>;
|
|
};
|
|
|
|
gsc_3: gsc@13e30000 {
|
|
compatible = "samsung,exynos5-gsc";
|
|
reg = <0x13e30000 0x1000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_gsc>;
|
|
clocks = <&clock CLK_GSCL3>;
|
|
clock-names = "gscl";
|
|
iommu = <&sysmmu_gsc3>;
|
|
};
|
|
|
|
hdmi: hdmi@14530000 {
|
|
compatible = "samsung,exynos4212-hdmi";
|
|
reg = <0x14530000 0x70000>;
|
|
power-domains = <&pd_disp1>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
|
|
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
|
|
<&clock CLK_MOUT_HDMI>;
|
|
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
|
|
"sclk_hdmiphy", "mout_hdmi";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
};
|
|
|
|
mixer@14450000 {
|
|
compatible = "samsung,exynos5250-mixer";
|
|
reg = <0x14450000 0x10000>;
|
|
power-domains = <&pd_disp1>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
|
|
<&clock CLK_SCLK_HDMI>;
|
|
clock-names = "mixer", "hdmi", "sclk_hdmi";
|
|
iommus = <&sysmmu_tv>;
|
|
};
|
|
|
|
dp_phy: video-phy {
|
|
compatible = "samsung,exynos5250-dp-video-phy";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
adc: adc@12D10000 {
|
|
compatible = "samsung,exynos-adc-v1";
|
|
reg = <0x12D10000 0x100>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_ADC>;
|
|
clock-names = "adc";
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sss@10830000 {
|
|
compatible = "samsung,exynos4210-secss";
|
|
reg = <0x10830000 0x300>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clock CLK_SSS>;
|
|
clock-names = "secss";
|
|
};
|
|
|
|
sysmmu_g2d: sysmmu@10A60000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x10A60000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <24 5>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_mfc_r: sysmmu@11200000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11200000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <6 2>;
|
|
power-domains = <&pd_mfc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_mfc_l: sysmmu@11210000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11210000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <8 5>;
|
|
power-domains = <&pd_mfc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_rotator: sysmmu@11D40000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11D40000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_jpeg: sysmmu@11F20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11F20000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <4 2>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_isp: sysmmu@13260000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13260000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <10 6>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_ISP>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_drc: sysmmu@13270000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13270000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <11 6>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_DRC>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_fd: sysmmu@132A0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132A0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 0>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_FD>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_scc: sysmmu@13280000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13280000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 2>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_SCC>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_scp: sysmmu@13290000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13290000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <3 6>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_SCP>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_mcuctl: sysmmu@132B0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132B0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 4>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_MCU>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_odc: sysmmu@132C0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132C0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <11 0>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_ODC>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_dis0: sysmmu@132D0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132D0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <10 4>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_DIS0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_dis1: sysmmu@132E0000{
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132E0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <9 4>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_DIS1>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_3dnr: sysmmu@132F0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x132F0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <5 6>;
|
|
clock-names = "sysmmu";
|
|
clocks = <&clock CLK_SMMU_FIMC_3DNR>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_lite0: sysmmu@13C40000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13C40000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <3 4>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimc_lite1: sysmmu@13C50000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13C50000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <24 1>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gsc0: sysmmu@13E80000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13E80000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 0>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gsc1: sysmmu@13E90000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13E90000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 2>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gsc2: sysmmu@13EA0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13EA0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 4>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_gsc3: sysmmu@13EB0000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13EB0000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <2 6>;
|
|
power-domains = <&pd_gsc>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_fimd1: sysmmu@14640000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x14640000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <3 2>;
|
|
power-domains = <&pd_disp1>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
sysmmu_tv: sysmmu@14650000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x14650000 0x1000>;
|
|
interrupt-parent = <&combiner>;
|
|
interrupts = <7 4>;
|
|
power-domains = <&pd_disp1>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&tmu 0>;
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
/* Corresponds to 800MHz at freq_table */
|
|
cooling-device = <&cpu0 9 9>;
|
|
};
|
|
map1 {
|
|
/* Corresponds to 200MHz at freq_table */
|
|
cooling-device = <&cpu0 15 15>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dp {
|
|
power-domains = <&pd_disp1>;
|
|
clocks = <&clock CLK_DP>;
|
|
clock-names = "dp";
|
|
phys = <&dp_phy>;
|
|
phy-names = "dp";
|
|
};
|
|
|
|
&fimd {
|
|
power-domains = <&pd_disp1>;
|
|
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
iommus = <&sysmmu_fimd1>;
|
|
};
|
|
|
|
&i2c_0 {
|
|
clocks = <&clock CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
};
|
|
|
|
&i2c_1 {
|
|
clocks = <&clock CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
};
|
|
|
|
&i2c_2 {
|
|
clocks = <&clock CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
};
|
|
|
|
&i2c_3 {
|
|
clocks = <&clock CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
};
|
|
|
|
&pwm {
|
|
clocks = <&clock CLK_PWM>;
|
|
clock-names = "timers";
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&clock CLK_RTC>;
|
|
clock-names = "rtc";
|
|
interrupt-parent = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&serial_0 {
|
|
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_1 {
|
|
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_2 {
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
&serial_3 {
|
|
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|
|
|
|
#include "exynos5250-pinctrl.dtsi"
|